[D-Tap] Most D-tap cables are often too short. Sometimes all you need is just a little bit more reach like an extra 20 or so. Both ends on this cable are well built and solid.

Don't exceed 10 amp load on any D-Tap cables, especially when extended.

Would also be nice and very useful if they made a 6ft extension. For 10 amp max loads, I'd guess it would be ok... That would be very useful (to me at least).

[I have received this product in exchange for my honest review].

[0.085 lb] should have read the specs more before purchasing as the cable is a lot longer than what i needed but it works great with no issues. just used a bongo tie to keep the slack wrangled.

[4.05 x 2 x 0.5"] I have this cable and it's an absolute must have for the Atomos Sony type npf dummy battery with locking connector. I haven't been able to find anything else besides this cable that works! I Also use it with my Hollyland wireless HDMI system, which takes a locking DC barrel cable. This does the trick! Amazing cable AND amazing company with excellent customer service! I had a broken cable and they replaced it under warranty with a day1

[0.085 lb] Needed another charger for my Stella 1000 so I could build out my rig and not have to use the adapter piece on the only charger I have. Wish they would of sold the 3 pin that connects to the light seperatly. But they don't. Works great for what I needed.

[0.085 lb] VERY COOL , THANK YOU SO MUCH

[0.085 lb] It works and is laid out nicely.

[4.05 x 2 x 0.5"] Great product

[D-Tap] I am familiar with Light & Motions battery integrated cinema lights (also can run off AC) and was surprised they even made a 10,000 lumen, flicker-free model. Its lighter and smaller than any of the heavy duty stuff Ive been lugging around. It comes with a decently long AC cord but you can easily use a Dtap and run your own batteries at remote locations. This is the power and quality I can use on all kinds of shoots, especially being fully dimmable. Throw on a dish or softbox and Light & Motion offers modifiers like a 25 degree Fresnel, barn doors, CTO sets, etc. Excellent high power lighting option!

[D-Tap] These compact lights are simply amazing. they deliver the goods that is power and lots of light and at a fraction of the size of other lights in this power class. the simple light shaping tools are actually quite impressive. for some jobs I have been using the ring adaptor to leverage my profoto soft boxes as well.

[4.05 x 2 x 0.5"] I'm an industry 1st AC and I've been using this Watson splitter for about a year now on countless cameras at this point and this thing has held up perfectly. Usually splitting power to a Teradek Tx, Nucleus Motor (or 2) and an onboard monitor. Haven't had any issues except for looseness at times. Anton Bauer D-Taps are usually skinnier than others (like Tilta's) and tend to slip out of this splitter. The nice thing is everything fits in it because of this. I usually use a small piece of pocket black gaff tape and make it go from end to end over this splitter across the tops of each D-Tap connection to hold it in place for the day when it goes low mod on Steadicam or the operator runs their hand past that spot too often. It works perfect