Tiffen 4X5.65" T1/2 Ir Filter For Cinematography

Tiffen 4x5.65" T1/2 Ir Filter For Cinematography

Product Code: eq177220
Availability: In Stock

$1,515.00 $2,257.35

Qty

16 reviews Write a review

Description
Reviews (16)

The Tiffen 4x5.65" T1/2 IR Filter for Cinematographyis a near-infrared to infrared control filter that is designed for digital cinematography. Many digital motion-picture cameras are designed to maximize their ability to capture red hues, and in that process near-infrared or infrared contamination may occur. If the proportion of near-infrared or infrared light that reaches the sensor of a digital cinematography camera becomes too great, the results can show unwanted color shifts, particularly in dark areas of the frame such as shadows where the appearance of black is dominant.

When the Tiffen 4 x 5.65" T1/2 IR Filter is used, near-infrared light waves beginning at 680nm are blocked by approximately 45%. Infrared light waves at higher frequencies are further impeded until nearly flat attenuation is achieved at 775 to 800nm. This process helps to ensure that the light that falls on the camera's sensor is limited to the visible spectrum. Potential near-infrared or infrared color shifts are prevented or minimized, which preserves color accuracy throughout the frame. While a Tiffen T1/2 IR Filter is sufficient for many cameras, others may have sensors that require a higher degree of near-infrared and infrared control, such as that provided by a Tiffen T1 IR Filter.

This filter is constructed from Water White glass for increased clarity as well as color fidelity. It is made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass, grinding flat to a tolerance of 1/10,000th of an inch.

Infrared Control Filter For Digital Cinematography Blocks Near-IR to Infrared, 680 to 800nm 1.41x Filter Factor, 0.5 Stop Prevents Near-IR and IR Light Pollution Maintains Appearance of Dark Areas Helps Preserve Color Accuracy Water White Glass Construction ColorCore Technology Padded Pouch

Parameters
Filter Type	IR Control Only
Transmission Range	Blocks Wavelengths Above 760 nm
Exposure Reduction	0.5-Stop
Size	4 x 5.65" / 101.6 x 143.5 mm
Front Accessory Thread / Bayonet	No
Coating	No
Filter Thickness	0.2" / 4 mm
Filter Material	Glass

Designed for use with CCD or CMOS sensors to filter out near-infrared and infrared light pollution that cause color shifts frequently associated with high-definition recording
Blocks near-infrared light waves beginning at 680nm by approximately 45% until nearly flat infrared attenuation is achieved at 775 to 800nm
Constructed from Water White glass for increased optical clarity
No dichroic coatings to further ensure color accuracy
1.41x filter factor reduces exposure by 0.5 stops
Padded pouch included for storage and transport

Related Questions and Answers

Q: 1. Is this compatible with the DS2422+? If not is there an adapter that would work with that model?

A: The Synology E10M20-T1 M.2 SSD & 10GbE Combo Adapter Card is compatible with the Synology DiskStation DS2422+ 12-Bay NAS Enclosure.

Q: 2. Is WD 1TB Black SN750 NVMe M.2 SSD working with this card?

A: Yes, this will work with the WD 1TB black NVMe Drive.

Q: 3. Does this fit on the Fujifulm X-T30?

A: Unfortunately this grip is not compatible with the Fuji XT30.

Q: 4. does this come with a bulb?

A: No it doesnt.

Q: 5. WILL THIS ALSO FIT THE NEW Fujifilm X-T2 ?

A: I asked Fujifilm (the technical department). They told me that each model is specific in terms of the functioning of the battery grips.

Q: 6. What Material is the grip made from and is it weatherproof?

A: The model is a polycarbonate plastic. Unfortunately it is not weatherproof. My sincere apologies.

Q: 7. Does this battery grip fit the X-T3?

A: Unfortunately, the BG-F1 does not fit the X-T3. The proper battery grip is the FUJIFILM VG-XT3 Vertical Battery Grip, B&H # FUXT3VBG. https://bhpho.to/34dWxDb

Q: 8. Does it work on X-t2?

A: I asked Fujifilm (the technical department). They told me that each model is specific in terms of the functioning of the battery grips.

Q: 9. Is this compatible with the DS1819+?

A: Yes, the Synology E10M20-T1 M.2 SSD & 10GbE Combo Adapter Card BH #SYE10M20T1 is compatible with the Synology DS1819+.

Q: 10. I have the graphite Fuji XT-1. Is there a grip out there that matches mine?

A: .vello BG F1is a very good alternative for fuji XT 1 graphite silver edition also I m using it works perfectly fine thank you BH photo

anyonymous	14/09/2024
[Glass] Great product....This filter does a really good job on the Sony EX1. 5

Shinji-P	08/09/2024
[IR Control Only] I am a long-time PMW-EX1 user. I purchased it in January of 2009 and up until this point never really dug into WHY certain colors looked different compared to other cameras. I just assumed that it was the nature of the camera. However, more recently after upgrading my multi-cam setup to Sony CX900s, the black-turned-brown problem became blatantly obvious. For the longest time I just lived with it until I couldn't stand it anymore. Research led me here: the Tiffen T1 IR cut filter. I popped this baby on, re-white balanced, and bam! Blacks became black, no more brown! NOW the biggest problem I face is more-closely color matching the EX1 to my CX900s, but let me tell you it is now a LOT better than it was before. I'm over 8 years late to the party, but hey, I can get more use out of my EX1! My clients have been very forgiving and didn't even notice the brown blacks before, but it was driving me nuts. Problem solved. If you own an XDCAM EX, just get this. I've heard the replacement model of the EX1 still has the same IR leak problem, so this filter is still relevant to the XDCAM line today. Some things you can't fix in post, and I've never believed in that philosophy anyway. The higher-quality your first-generation signal, the better your output will be; this filter gives you that. 5

Alfieboy	19/08/2024
[Glass] Like many Sony EX-1 owners, I waited two years for a filter that could correct that camera's tendency to cause the red color spectrum bleed. When this occurred under certain lighting conditions,certain shades of black would appear, brown, burgundy or various other color tones. This filter corrects that problem 100%. It keeps all of the black colors within the scene the proper shade of black. I would say, this is a must have filter for all Sony EX1 owners. 5

anyonymous	12/08/2024
[Glass] I started to get reddish brown hues on objects that should be black with my Sony EX3. After that shoot I ordered the T1 Infrared Filter by Tiffen and black objects now appear as they should. The 77 mm threaded filter is slim enough to allow the sunshade assembly to re-attach after putting the filter in place. That's the good! The bad, well you lose some light transmission. But at least your color is correct! 5

Ko	14/07/2024
[IR Control Only] I purchased for PMW-320. I got true black. so nice. 5

Frank	25/06/2024
[Glass] Used on our PMW-EX1 to eliminate black fabrics from turnning a muddy red 5

filmcartel.org	15/06/2024
[IR Control Only] This filter will eliminate far red casting on man-made black materials like rayon making them look brown. Keep your black shirts black without changing the rest of the spectrum. An essential filter in the kit for your EX1. 5

Leigh	17/05/2024
[Glass] I purchased the filter for a Sony EX camera. The blacks on the camera have a red tone but once I put on this filter the red went away and the blacks looked black. The filter worked so good that I ordered another one for my other camera 5

anyonymous	09/05/2024
[IR Control Only] great filter 5

TVPROD	19/04/2024
[Glass] Perfect to use with HD CMOS video cameras like EX1, EX3... Sometime you have unwanted reddish blacks because of infrared contamination in the picture. That's not a camera default : that let you the maximum red light width entering in the CMOS, but that can create unwanted effects, specially in blacks. Using this T1 filter will remove this bad effect and produce (after good white balancing, preset or mesured) a perfect picture. And not too much flare effects with incident light. A must have for your gear... 5