You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Acebil Ch4 Fluid Head - 100mm Ball

Acebil Ch4 Fluid Head - 100mm Ball
  • Product Code: eq17727
  • Availability: In Stock

$2,940.00 $4,439.40

Designed for use with 100mm bowl tripods, the Acebil CH4 Fluid Head - 100mm Ballfeatures a 100mm ball design and supports loads up to 26.4 lb. A 6-step counterbalance allows you to compensate for the weight of your rig for better balancing, while independent 4-step pan and tilt drag settings provide adjustable resistance for precise movements. A sliding quick release plate attaches to your camera via a 1/4"-20 or 3/8"-16 screw, for easy attachment and removal. To assist in keeping your shots level, even in dim environments, the head has a built-in LED illuminated bubble level. A pan bar comes included and can be attached on either the left or right side of the head.

Load Capacity: 26.4 lb    6+0 Step Counterbalance    4-Step Independent Pan/Tilt Drag    Tilt Range: +90° / -70°    Sliding Quick Release Plate    1/4"-20 and 3/8"-16 Camera Screws    LED Illuminated Bubble Level    Pan Bar Included

Key Specs
Camera Mounting Screw1x 1/4"-20 Male
1x 3/8"-16 Male
Camera PlateQuick Release w/ Sliding Balance Plate
Head TypeFluid Head
Drag ControlYes
Load Capacity26.4 lb / 12 kg
Weight6.2 lb / 2.8 kg
Camera Attachment
Camera Mounting Screw1x 1/4"-20 Male
1x 3/8"-16 Male
Camera PlateQuick Release w/ Sliding Balance Plate
Head
Head TypeFluid Head
Base Mount100 mm Half Ball
Counter BalanceIncremental 6-Step Plus 0
Pan & Tilt
Drag ControlYes
Independent Pan LockYes
Independent Tilt LockYes
Vertical Tilt+90° to -70°
General
Load Capacity26.4 lb / 12 kg
Bubble LevelYes
Weight6.2 lb / 2.8 kg
Packaging Info
Package Weight7.925 lb
Box Dimensions (LxWxH)17.3 x 8.9 x 8.6"

  • Supports loads up to 26.4 lb
  • 100mm ball
  • 6-Step counterbalance
  • Independent 4-step pan and tilt drag settings
  • Tilt range: +90° / -70°
  • Sliding quick release plate with 1/4"-20 and 3/8"-16 screws
  • Included pan bar can be attached on left or right side of head

Related Questions and Answers

Q: 1. What is the lowest weight this will counterbalance?

A: It can counterbalance with a minimum of 0 lbs / 0 Kg.

Q: 2. Will Manfrotto Plates work ??

A: Yes, Manfrotto quick release plates are compatible: "The FOCUS 8 Fluid Head comes equipped with a sliding camera plate compatible with Sachtler ACE and Manfrotto standard plates" https://www.cartoni.com/products/fluid-heads/fluid-heads-75-mm/HF0800-focus-8/

Q: 3. Is the base plate Manfrotto 501PL compatible?

A: It will not match the 501PL plate.

Q: 4. Is this made out of the same material as the HD? Are the rosettes plastic or metal?

A: This product is made out of a combination of Plastic Composite and Magnesium.

Q: 5. Will this work on a 100mm Miller tripod?

A: Yes the Acebil CH4 Fluid Head (100mm Ball) will fit on other 100mm tripods.

Q: 6. I had trouble with a cartoni knob on a dana dolly in the past, how well will this head attach to a dana dolly with the 100mm bowl adapter?

A: The unit will offer nothing but a great plug and play experience when using the any 100mm bowl adapter.

Q: 7. Can it convert to flat base?

A: The Focus 8 is only compatible with 75mm bowl heads.

Q: 8. I have Miller style plates will it work? with this Cartoni Focus 8 or Focus 12

A: no Miller plates will not work on the cartoni tripods

Q: 9. What is the weight capasity?

A: This supports up to 15kg - 33lb.

Q: 10. Tell me, is this truly an actual fluid head? Thank you in advance.

A: We spoke with Acebil and they say yes, this is a fluid head. In fact, the entire Acebil line is fluid head except for the entry level consumer models.

24/09/2024

[7.925 lb] This product is wonderful. Dispatch is also speedy.

5
22/09/2024

[7.925 lb] I'm happy with this bundle. The tripod is sturdy and the head operates smoothly. The zoom controller works well with the Canon camera, and the bag keeps it all together.

5
18/08/2024

[+90° to -70°] Cartoni makes some of the best heads out there. This new head is of good quality and doesn't break the bank.

5
15/08/2024

[Yes] Bought this about a year ago. I use medium size rigs on it. built up c70 with Ninja V and follow focus and other not so heavy things. I'm guessing about 6lbs. This works like a champ!


Its smooth and the drag controls are spot on. They're tuned to each other, meaning if you put the tilt on 2 and pan on 2, you can make a nice circle movement and not notice any difference in the two resistance. Not to mention completely repeatable, unlike those friction clutch systems.


The counter balance system is great too. But if you use just a dslr or mirrorless by itself, it may be too light for the counter balance, even at the 1 setting. Some people mentions that there is no in between increments (there are only 4 settings), but I had yet to have a rig not balance on those 4 settings.


The locks are great and nothing moves once locked. but I don't like the placement of the pan lock. Its too tucked in. You have to fumble around like a teenager trying to... never mind.


I like the way the handle can telescope out. The longer handle will give you less shake, if using a very long lens or you had too much coffee.


The ball lock is good too. Never had it slip on me yet. Its not the most comfortable shaped knob but since you don't have to twist it that hard lock or unlock, its not too bad.


I wish the head was lighter, but its a video head, I guess you really can't skimp on weight. This is a couple of notches higher than your budget friction fluid heads for sure. Love it!

5
18/07/2024

[Yes] Pan and tilts are butter-smooth. After properly balancing my camera, I do not feel any backlash at the end of a swipe. The continuous counterbalance system is amazing, which led me to choose Cartoni over the equivalent Sachtler or Miller. Frankly speaking, without continuous counterbalancing, perfect balancing is not achievable by any means. This fluid head is doing that effortlessly, even with the uncooperatively lightweight Black Magic Pocket. The only slight qualm i have is about the bubble level, which is located in a cavern where parallax error in reading is inevitable. On top of that, it gives me a feeling that its calibration is slightly off. But if you are married, this should not bother you at all!

5
13/07/2024

[Yes] If you combined the performance of the Manfrotto 502 head with the footprint of the 500... at a cheaper price tag, you'd have this. The GH03 is perfect if you're doing a run and gun shoot with a mono-pod.

5
23/06/2024

[Yes] Very stable solid product. Great quality

5
05/06/2024

[+90° to -70°] I had an older Cartoni that had been reliable for years. When that head broke beyond repair, this was an easy choice for replacement. Super smooth movement, and incredibly stable with my heaviest rigs, this is exactly the upgrade I was looking for.

5
28/05/2024

[Yes] I have been using this ballhead for two years, and still impressed with level of smoothness and precision. Haven’t seen anything nearly as good in this price range. Perfect for small to medium sized setups.

5
15/04/2024

[Yes] Bought the Focus 22, heavy duty legs and ground spreader. The first thing you notice is how robust and sturdy this thing is. The next thing you notice is how perfectly you can dial in the Pan/Tilt drag and counterbalance.

My work is varied from commercials to social media to music videos and this tripod system has already improved my on set workflow.

It’s heavy. For me, that’s a big plus. If heavy isn’t for you I’d still consider a tripod in the Cartoni line because they have a seriously high quality product.

I opted for this tripod over the Sachtler video 18s2 and O’Connor 1040 and I am not disappointed.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Acebil H25 75mm Ball Fluid Head

$735.00 $1,109.85

Acebil Ch2 Fluid Head - 75mm Ball Design

$2,100.00 $2,751.00

Acebil Ch3 Fluid Head 75mm Ball

$2,520.00 $3,402.00

Acebil Ch0 Fluid Head For 75mm Ball Tripods

$1,470.00 $2,278.50

Acebil Ch9(f) Video Fluid Head 100mm Ball

$16,380.00 $21,457.80

Acebil H60 Fluid Ball Head With Dual Pan Handles

$3,738.00 $5,644.38

Acebil H35 Fluid Head - 75mm Ball Tripod Head

$945.00 $1,332.45

Cartoni Focus 22 Fluid Head 100mm Ball Base

$15,327.00 $19,771.83

Vinten Vision 100 Fluid Head 100mm Ball Base Black

$21,375.00 $33,131.25

Camgear V20p Fluid Head 100mm

$9,855.00 $12,121.65

Acebil Ch1 75mm Fluid Head

$1,890.00 $2,721.60

Leofoto Ball Head 100mm Bowl

$747.00 $1,000.98

Cartoni Focus 12 Fluid Head 100mm

$4,368.00 $6,071.52

Sachtler Cine 20 Fluid Head 100mm Bowl

$19,950.00 $26,932.50

Camgear V25p 100mm Fluid Head

$11,610.00 $18,459.90

Acebil 150mm Ball Tripod Head With Dual Handles

$25,200.00 $39,312.00

Products You May Like

Nugen Audio Seq-s Linear Phase Eq Plug-in

$747.00 $1,075.68

Psc Cart Power Ii Distribution System

$2,191.50 $2,958.53

American Dj Stream Paks Encore Fr20 Dt

$1,139.97 $1,390.76

Sachtler Cine 150 Tripod With Cine 30 Fluid Head

$47,025.00 $63,483.75

Projector And Motorized Screen

$12,951.00 $20,203.56

Teradek Bolt 6 Monitor Module 1500 Tx Smart 7

$8,670.00 $12,658.20