The Yongnuo YN622N II i-TTL Transceiver for Nikon (2-Pack)is comprised of two 7-channel transceivers that work on the 2.4GHz frequency. The units have 3 working modes, I-TTL (II), Manual, and Multi, and have a 300' wireless range. The triggers supports FEC, FEB, FEL, 1st and 2nd Curtain Sync, Modeling flash, i-TTL II Group Ratio (ALL/A:B/A:B C), Manual/Multi group (ALL/ A:B/ A:B:C), Manual and Multi mode, Auto Zooming, Manual Zooming, and AF Lamp. The YN622N II transceivers will also support HSS (High-Speed Sync) for action freezing and greater exposure latitude. (Please see below for compatible cameras and flashes)

Cameras

Nikon D4, D3X, D3S, D3, D2X, D800E, D800, D700, D300S, D300, D200, D7000, D90, D80, D5200, D5100, D5000, D3200, D3100, D3000, D60, D40X, D40, and D7200 in manual mode

Flashes

Nikon (i-TTL): SB400, SB600, SB700, SB800, SB900, SB910

Yongnuo: YN465N, YN467N, YN468N(II), YN560II, YN560III, YN565N, YN568N

Related Questions and Answers

Q: 1. Can I use for my vivitar 285 flash?

A: You could use this transceiver kit if you have one of the Vivitar 285HV flashes made in the last several years, which has a lower sync voltage.

Q: 2. Will these work with a D7200?

A: Yes they will

Q: 3. Will the Yongnuo yn622n ii work with my D500 and D810 using SB700 and SB800 speed lights?

A: most lokely but probably would require yongnuoo transmitter on camera

Q: 4. I need a OCF setup but never used this brand. I need a pass through transmitter and two receivers for wedding receptions. Do these have such a thing?

A: Zach,I'm not familiar with the term OCF . I have used the YN622N along with the TX622N on my camera to fire my old SB28 flash and I have used one of the YN622N's to fire the camera and the flash remotely. I have had no trouble in my testing of these units and I am considering buying a Yungno flash as well to supplement my SB28. To date, I am very satisfied with the YN622N.

Q: 5. Are both YN622N-TX and YN622N-II compatible with Nikon D850 ?. I have three SB900s. Thanks for your help.

A: Yes the YN-622N is compatible with the D850 and SB 900s.

Q: 6. Will these work with a Nikon D610?

A: It will work on any nikon dslr camera. I use it on my D600.

Q: 7. Does the YN622N II support the new SB 5000 please? and does the version II works with first version ?

A: Unfortunately, there have not been any tests to date involving the YN 622N II and the SB-5000. With that being said, we are not able to confirm their full compatibility. As for the features in the YN 622N II over the original YN 622N, those would be the USB port for firmware updates and a locking hot shoe. They are full compatible with the original YN 622 units.

Q: 8. can I use this as a auto focus assist only with my camera in aprature priority mode or will I have to use the camera in manual mode with it?

A: As you keep pressed the test button, the camera will operate just as if you were holding shutter button, making the focus if you are in autofocus. When you release the button the photo is taken.

Q: 9. Will these trigger an SB-300 Speedlight?

A: Yes no problem

Q: 10. Will these work to and from a Yongnuo YN-622N-TX i-TTL Wireless Flash Controller and a Nikon SB-900?

A: Yes, if you connect the Nikon SB-900 Speedlight Flash to the Yongnuo i-TTL Transceiver YN622N for Nikon Cameras, the Yongnuo YN-622N-TX i-TTL Wireless Flash Controller will wirelessly trigger the Nikon SB-900 Speedlight Flash.