Angler Rc-16-R Receiver | Compact & Reliable Rc Receiver

Angler Rc-16-r Receiver | Compact & Reliable Rc Receiver

Product Code: eq177347
Availability: In Stock

$38.85 $51.28

Qty

10 reviews Write a review

Description
Reviews (10)

The Angler RC-16-R Receiver | Compact & Reliable RC Receiverfrom Angler RC-16-R Receiver | Compact & Reliable RC Receiveris an advanced 16-channel, 16-group radio triggering device that can fire your remote Angler Q-400 Monolight flash at sync speeds up to 1/250 second at distances up to 150' as well as control its power level.

Operating on the 433 MHz frequency and powered by the host device, the receiver, when used with its separately purchased Angler RC-16-T transmitter, can raise and lower the power of the slave flash in 1/10 or 1/3 stop increments as well as turn modeling lights and audio alerts on and off. It's also capable of turning the AF assist on or off on flash units that have this feature.

For Angler Q-400 Monolight Raise or Lower Flash Power Remotely 16 Channels, 16 Groups 433 MHz Frequency 150' Range Controls Modeling Lamps and AF Assist Controls Audio Alerts USB Powered

Key Specs
Channels	16
Groups	16
Wireless Range	150' / 45.7 m
Wireless
Channels	16
Groups	16
Wireless Range	150' / 45.7 m
Radio Frequency	433 MHz
General
Sync Speed	1/250 Sec
Physical
Dimensions	Receiver: 2.2 x 1.2 x 1" / 57 x 30 x 27 mm
Weight	0.7 oz / 20 g
Packaging Info
Package Weight	0.045 lb
Box Dimensions (LxWxH)	2.45 x 1.25 x 1.05"

Triggers flash wirelessly from up to 150'
Adjusts power levels remotely
Turns modeling lamp and audio alert on and off
16 Channels and groups
USB powered, no batteries

Angler Q-400 Monolight

Related Questions and Answers

Q: 1. What is the maximum cable length for this remote?

A: The controller is powered from the connected camcorder via thi included 5 m (15 ft.) cable.

Q: 2. will this work with the Canon C700?

A: We have not seen any information that this control unit will work with the C700. At this time only the Canon OU-700 Remote Operation Unit is expected to operate in that manner.

Q: 3. Does this come with the power cable?

A: Yes, the Teradek MDR.S Compact 3-Channel Lens Control Receiver with Bluetooth (B&H# TERTMDRSLCRB) includes the Teradek RT Power 3-Pin D-Tap (also called P-Tap) Cable. That has a D-tap (compatible with P-tap) male connector on one end and a male 3-pin connector on the other for power.

Q: 4. Does this support tof.1?

A: It does not. You will need to use the MDR.X.

Q: 5. Dose it work with the c200

A: Yes, the Canon RC-V100 Remote Controller works with the Canon C200.

Q: 6. does this work with the canon c300 mark ii?

A: Yes, this should work well with the C300 Mark II.

Q: 7. Will this receiver work with a Pocketwizard transmitter?

A: No it does not, it works well with the RT-16 transmitter.

Q: 8. Does this work with a Y motor cable from previous generation MDRs from Teradek RT so that two 3.1 motors can be used?

A: No, the Teradek MDR.S Compact 3-Channel Lens Control Receiver with Bluetooth will not work with a Y motor cable from the previous MDR.

Q: 9. is there anyway to split the lanc at camera to use a local rocker zoom and the studio remote at the same time?

A: I am afraid that we do not have LANC splitters available. However it would be very easy to simply plug in the proper cable for the controller you wanted to use at that time. We offer LANC extension cables up to 100 feet, so just as long as you labeled which cable was which it would not be difficult to swap out controllers.

Q: 10. Is there any way to transmit the remote signal wirelessly?

A: There is no known way to work this remote wirelessly.

anyonymous	21/09/2024
[16] Es lo que hoy en dia uno requiere para seguir practicando este Hobby. Aviones R/C. 5

Mark	12/09/2024
[16] This receiver is what all radio trigger receivers should be. It uses the battery power of the flash. Thus, if you have power for your flash, you have power for the receiver. Super reliable. I have never had a misfire with this receiver. Better than all my Pocket Wizards. 5

Barbara	19/08/2024
[433 MHz] Simple to use. Works with the set I already bought. No complaints here 5

Kyle	09/07/2024
[16] Compared to other wireless trigger systems, this is a deal. Obviously this system is built specifically for Angler/Impact lights, but for the money you get tons of flexibility. Remember to buy the receivers as they dont come with your monos or with this transmitter, but at $24 each, its not a deal killer to buy a few of them for your lighting setup. 5

Rob	28/06/2024
[16] This transmitter (used with the USB receiver) is a simple trigger and remote control system. What I like about this system is that every time I press the shutter button on my camera, it triggers and I never get a misfire. That may sound silly but many systems have misfires or odd behaviors. I haven't experienced any of that when using this system with the Angler Q400 monolight. Operating the remote is easy and straight forward, giving me 1/3 stop control of my bare bulb flashes and 1/10 stop control over monolights. Perfect. 5

Veronica	21/05/2024
[16] Excellent 5

Rob	28/04/2024
[1/250 Sec] I've already posted my review of the RC-16-T transmitter, and this receiver completes the system. Plug this little unit into the USB port on a compatible flash or strobe, set the channel and group and that's it. It just works. 5

Kyle	25/04/2024
[433 MHz] Just ran these through a test in my studio and they worked perfectly. No setup or format was necessary. Just plug these receivers into your lights, attached the transmitter to your hotshoe and begin shooting. Lights fire flawlessly every time! If you have a set of these lights, Id really recommend spending the few bucks it takes to get these receivers and a transmitter. Itll make the time spent in studio or on location much more enjoyable. Youll be able to focus on your subject instead of focusing on light adjustment because each light can be assigned to a different group. This allows you to control the output from the transmitter - no more running around from light to light to adjust settings! 5

anyonymous	30/11/-0001
[1/250 Sec] Good 5

Ray Ray	30/11/-0001
[16] This receiver when used with The RT-16 transmitter seems to work really well. It's very small, about the size of a USB thumb drive. Not complicated at all, just plug it into the flash and make sure your chanels are correct. My only complaint is it kind of flops down as it sits in the slot, looks kinda sloppy, but doesn't affect use at all. 5