The COB Cannon Wash Pearl from American DJ uses advanced RGBA COB (Chip On Board) technology allowing for a powerful LED engine to be placed in a small amount of space. The result is a high-output, smooth color mixing LED PAR with no RGBA shadows. It is designed for mobile or permanent wash lighting of stages, clubs, dance floors, and churches. The COB LED engine on the COB Cannon Wash Pearl is a QUAD RGBA 4-in-1. It also doubles as an uplight with its dual yoke that act as legs to set the fixture upright to wash walls and ceilings.

It has 7 DMX channel modes for programming flexibility, built-in color macros, and 5 selectable dimming curves. The fixture has other advanced features such as 0 to 100% electronic dimming, strobe/pulse effect, flicker-free operation, DMX and powerCON power daisy-chaining, and a 4-button DMX display.

The COB Cannon Wash Pearl comes in an off-white casing and has a massive 80° beam angle. It comes with easily replaceable 40° and 50° lens to adjust the beam angle. 

COB Technology (Chip on Board) with one Quad (4-in-1) RGBA COB LED

Off-white metal casing

Produces smooth RGBA color mixing with rich palettes of color

Use as wash/PAR or pixel-mapped for visual effect

64 x built-in color macros

Flicker-free operation (no flickering on camera)

LED pulse and strobe effect

Five selectable dimming curves: Standard, Stage, TV, Architectural, and Theater

Includes lens kit to change to 40° or 50° beam angle

3-pin and 5-pin XLR chassis mount connectors for DMX linking

powerCON AC input/output to daisy chain power (up to 5 fixtures)

4-button digital DMX display on rear panel

Compatible with ADJ RFC wireless remote control (sold separately)

Dual yoke allows fixture to be mounted on truss or set on the ground

Related Questions and Answers

Q: 1. How do I activate Audio Sensing light effect?

A: To activate Audio Sensing on Colbor CL60R you need to go in effects menu. choose Party mode and switch Rate to Lv.5, and this will activate Audio Sensing.

Q: 2. I've heard from others that the fan noise on the 200d was loud and obnoxious. Is that problem fixed with the new 200d s?

A: Fans on lights of this level will with the Amaran 200d will make some noise. If you are able to use a mic with an isolating pattern and move it from the light you can work around the fan noise. If you are using only a multidirectional room mic with the mic placed near the light you will of course pick up the fan.

Q: 3. What do I need to power this from a v mount battery? And will a 99watt battery work if I only use the light at half power?

A: Yes, a 99WH battery will work on the amaran COB 100d S Daylight LED Monolight if used at half power. You will need the Aputure 2-Bay Battery Power Station (V-Mount) in order to attach V-Mount batteries to the light. (B&H # APAAKS2BPSV)

Q: 4. What is the main differences of this [Aputure] amaran 60x and the Light Storm 60x from Aputure?

A: Aputure LS 60x Bi-Color LED Focusing Flood Light BH #APLS60X • MFR #APA0183A20 is a tighter spotlight while the cob amaran COB 60x S Bi-Color LED Monolight BH #AMAPA0020A20 can be a tight spot or a wide flood and can accept a wide range of bowens mount modifiers. And the Aputure LS 60x Bi-Color LED Focusing Flood Light BH #APLS60X is more compact and can accept further dedicated spot attachments to further project and modify the light.

Q: 5. How much will this light last if powered with two NPF 970 batteries?

A: With an average capacity of 57Wh for a NPF-975, the amaran COB 60x S Bi-Color LED Monolight BH #AMAPA0020A20 would have a run time of just under 2 hours.

Q: 6. Will the Bowens mount on the amaran COB 60x S Bi-Color LED Monolight hold up well with a Godox 60 x 90 cm softbox?

A: The amaran COB 60x S Bi-Color LED Monolight BH #AMAPA0020A20 would be fine with a 60x90cm softbox.

Q: 7. New 60Xs's output : 33,300 Lux@3.3'. Current 60X's output : 37,775 Lux at 3.3' . Is New 65W model darker than old 60W version?

A: The Amaran COB 60x S Bi-Color LED Monolight (B&H# AMAPA0020A20) has a new COB LED assembly with different characteristics from those of its prededecessor, the 60x (note that there is no S in the name of the older one). The newer COB LED assembly of the 60x S offers better color, but also a different beam spread from that of the earlier 60x (no S). For that reason, the answer to your question depends on whether or not the Hyper Reflector (Mini) is used with each light. Specifically, the original Amaran COB 60x (no S) is slightly brighter with no reflector added than the newer Amaran COB 60x S. However, due to the update, the newer 60x S actually produces a slightly brighter center spot than the original 60x (no S) when the Hyper Reflector (Mini) is used.

Q: 8. What is the recommended cable to power the unit from a V-Mount battery?

A: we recommend the following unit for DC power Nanlite D-Tap to 5.5mm Male DC Barrel Power Cable BH #NACBDTDC • MFR #CB-DT/DC https://bhpho.to/3HbLGzM A V-mount battery of choice is needed

Q: 9. Will this light take NP - F batteries and can it do it out of the box?

A: Yes, the amaran COB 60x S Bi-Color LED Monolight comes with a Dual NP-F Battery Plate for DC Barrel (5.5mm) that attaches to the light so you can use two NP-F batteries.

Q: 10. What travel case is good for this product?

A: Yes, we suggest the following unit for your travel needs. Pelican 1615AirWF Wheeled Hard Case with Foam Insert (Black) BH #PE1615ACFB • MFR #016150-0001-110 https://bhpho.to/4317bvT