When long-range communication is needed, the EnGenius DuraFon PRO-PIB20 Multi-Handset Bundle Antennasfrom EnGenius DuraFon PRO-PIB20 Multi-Handset Bundle Antennasis the solution. This bundle comes with everything needed to implement a long-range phone system including the DuraFon PRO Handset base, four DuraFon PRO Handsets, eight battery packs, four charging cradles, and much more. With the included external high gain antenna, the phones are accessible throughout 250,000 square feet of coverage and through floors inside a building. Configuration is simple as the entire setup can be worked into existing PBX, VoIP, PSTN, FXS, or POTS phone systems. Once configured, the possibilities are virtually limitless as the user capacity can be expanded to up to 90 handsets by adding an additional 7 base stations.

1 x DuraFon PRO Base Unit    4 x DuraFon PRO Handsets    Up to 250,000 sq. ft. Coverage    Scalable up to 90 Handsets    Work Behind a Variety of Analog Ports    Rugged Housing    Broadcast to Connected Handsets

Extends in-building signal through 12 floors with 250,000 square feet of facility coverage or 3,000 acres of open land coverage.

Supports up to 90 DuraFon PRO or DuraWalkie handsets and is expandable to 8 bases for 32 line/ports for expanded user capacity.

Works behind any analog port (PBX, VoIP, PSTN, FXS or POTS) for more flexible deployments.

Features a tested, rugged housing specifically designed for work in industrial environments. Finely constructed and drop tested for durability in a variety of environments.

Sends direct announcements to all handsets, or a group of handsets for emergencies and company wide messages.

Related Questions and Answers

Q: 1. anyone know the weight of the movi pro with ring/handle/feet and battery included?

A: About 4-6 pounds.

Q: 2. Would this cable work with the sennheiser ew d1

A: These cables would not work for the EM D1 receiver of a EW D1 system. To front mount the EM D1 receiver antennas in a rack, you would need the GA4 kit from Sennheiser, BH #SE505977. This gives you the proper R-SMA cabling and rack mount kit.

Q: 3. Hi there.. if i decide to buy this rotolight aeos 2 what type of trigger i have to buy ?for Sony A99II or i do not need any trig

A: The Rotolight AEOS 2 Pro Traveler Bundle is hybrid lighting, and if you want to use it as a flash, you will need the Godox XProS TTL Wireless Flash Trigger for Sony Cameras or the Godox Xnano S Touchscreen TTL Wireless Flash Trigger for Sony. If you wish to use it as a continuous light, there is no need for a trigger.

Q: 4. thread size? compatible with Pyro S ?

A: Yes, the CINEGEARS 5G Cloverleaf Antennas (2-Pack) is compatible with the Hollyland Pyro S 4K HDMI/SDI Wireless Video Transmission System. The thread is standard across all transmission systems.

Q: 5. Is this good for phone interviews?

A: I think it is, have been using it for radio stories, solid.

Q: 6. I have 2 Sennheiser EW100 G2 Wireless receivers. Will the BH #SEGA2XSW2 MFR #GA 2-XSW 2 work?

A: Yes, the Sennheiser GA 2-XSW 2, Extension Cables and BNC Sockets are compatible for use with the Sennheiser EW 100 G2 Wireless Receiver.

Q: 7. How much does the selfie stick part of this weigh?

A: The monopod/selfie stick only on the BUSHMAN Panoramic Panoramic Claremont Monopod 360 Bundle v3 is approxemelty 4 lbs

Q: 8. What is the advantage of these antennas over the stock, regular antennas?

A: The Cloverleaf antennas are more stable in all directions and provide an increased range over the standard antennas. They are also weather sealed and water proof.

Q: 9. Would these cables work instead of the more expensive AM2 cables on a G3 receiver?

A: Yes, these cables will work in the same way as the AM2 cables.

Q: 10. Has Bushman Panoramic indicated what will be included in this v3 Bundle?

A: The BUSHMAN Panoramic Claremont Monopod 360 Bundle V3 includes: the Pole Pro, the tripod Pro, the Counterweight 500 g, 3x Magnetic popeye, monkey clamp, ground spike, 1/4 spacer, neck strap, camera holder and a case.