With the ability to install three Rocket5ac Prism radios, the Ubiquiti airPRISM 5GHz 3x30° HD Sector Antennafrom Ubiquiti airPRISM 5GHz 3x30° HD Sector Antennaprovides three separate 30° beamwidth signal transmissions. The configuration of the radios makes this HD sector antenna a perfect solution for point-to-multipoint setups and with enhanced noise isolation and beam performance users benefit from a stronger signal with enhanced data rates. This antenna also operates on the less congested 5 GHz frequency offering a more reliable connection with reduced interference.

5.15 - 5.85 GHz Frequency Range    22 dBi Gain    Dual-Linear Polarization    6 x RP-SMA Connectors    Up to 125 mph Wind Loading/Survivability

Three Rocket5ac Prism radios mounted on a single airPrism antenna maximizes throughput in an

efficient tower footprint, minimizing installation and tower costs.

Highly resistant to noise interference, the airPrism antenna provides superior beam performance in high-density areas for high-capacity, multipoint networks.

The airPrism antenna and Rocket5ac Prism radios have been designed to seamlessly work together. Every airPrism antenna has three built-in Rocket radio mounts, so installation

requires no special tools.

Snap the three Rocket5ac Prism radios securely into place and mount the antenna for your PtMP link.

Related Questions and Answers

Q: 1. Is this listing for 2 pack of rocket dish?

A: Yes, this would be a 2 pack

Q: 2. Since the Syscom T1000 is a full 8 pack system, does that mean I have to buy 2 of the Extension panels to support all 4? Cause it says the extension panel only support 4 belt packs. Also, could I use the extension panel and still use the antennas that come with the Syscom t1000 together?

A: Yes, two of the Hollyland Extension Panel Antenna for SYSCOM 1000T/Mars T1000 would be required for full coverage of all components in the Hollyland Syscom 1000T-8B Full-Duplex Intercom System with Eight Beltpacks and Headsets. The Extension panel would replace the standard antennae used in the system and would connect to the same antenna input connections on the base station's back panel using the provided Communication Cable.

Q: 3. What port does the cable for this unit go into the hollyland mars t1000 coms system?

A: the following unit plugs does not plug into a port but extends your wireless transmission frequency range when using the SYSCOM 1000T or Mars T1000 intercom transmission systems with this Extension Panel Antenna from Hollyland.

Q: 4. What is the signal distance range on this antenna?

A: This unit extends the range of the original antenna by 100 meters.

Q: 5. Will these antenna work with various brands of radio receivers? E.g. if Im running both Lectros and Sennheiser

A: Yes! It's brand agnostic.

Q: 6. Hello do you get two dish antenna ? And can i use both of them to bridge two buildings ?

A: No, unfortunately this would be a single unit. Other hardware would be required to bridge the two points together.

Q: 7. Do I connect both SMA connections to the base station or is one a pass-thru?

A: Yes, both SMA ports on the Hollyland Extension Panel Antenna do need to be connected to the base station.

Q: 8. Do I need to connect both SMA connections to the base station? This has been asked before but not clearly answered.

A: Yes, when you connect the Extension Panel Antenna to the base station, the user needs to connect all the antenna ports on the base station to the Extension Panel`s SMA port.

Q: 9. I have two Lectrosonics IFB receivers. Can I use a splitter for this one antenna if the receivers are on the same block? I want to be able to send video village one signal and the boom op another.

A: Splitting the antenna feed is not recommended. The quality of the signal may be diminished.

Q: 10. Will this work with the unifi legacy access points?

A: This uses 802.11ac Wi-Fi Network Standard (WIFI 5). You can use it in a network with other AP.