The beige Sanken COS-11D Lavalier Mic with TA4F Connectoris a subminiature lav microphone designed to deliver clear, full-bodied sound and reliable performance, making it a popular choice among industry professionals in broadcast, TV, theater, film, videography, and more. 

Engineered to meet the standards of modern digital wireless microphone systems, the COS-11D is RF shielded to eliminate interference issues and ensure a pristine audio signal. The microphone capsule features a rectangular design that sits vertically, increasing the surface area and allowing this tiny mic to offer a rich, full sound that outperforms many larger models.

The mic's 50 Hz to 20 kHz frequency response rolls-off extreme low end and provides accurate, transparent audio reproduction with a small presence boost in the 6 kHz area for crisp, intelligible speech. With a forgiving omnidirectional polar pattern that picks up sound in a 360° pattern, levels stay consistent even when the subject turns away from the mic.

A water-resistant mesh screen protects against humidity, perspiration, makeup, bad weather, and other potential on-location issues, while the durable cable is also moisture-resistant and built to stay soft and pliable, even after extended use. This version of the COS-11D terminates in a TA4F connector and is wired for use with Trantec transmitters. Accessories are available separately and are not included with this configuration of the microphone.

For Broadcast, Film/Video & Presentation    Omnidirectional for Consistent Levels    For Trantec Transmitters with TA4M    -9 dB Reduced Sensitivity Level    Rugged 5.9' Cable Stays Pliable    RF Shielded for Digital Wireless    Water Resistant    Small Size Is Easy to Conceal    Requires 3 to 10 VDC

• Trantec: Works with Trantec bodypack transmitters equipped with a TA4M connector including the S5.5 Series.
• Also works with third-party wireless transmitters that are equipped to supply 3 to 10 VDC through a TA4M connector wired for Trantec compatibility.

Related Questions and Answers

Q: 1. Does this Rycote Softie Kit MFR #033395 work with Schoeps CMC641-- MFR #CMC641G SET?

A: Yes, the Rycote 033395 Softie Kit for Sanken CS-M1 Microphone with Windshield and Shockmount can also be used with the Schoeps CMC641 Set Colette Series Supercardioid Microphone.

Q: 2. Will the o rings fit with the Rode NTG2 on Sony's PXW-X70?

A: Thank you for you inquiry. The O-Ring is normally used with the CS1E which is 19mm and the Rode NTG2 is 22mm. I would say that should not be too much of a stretch and will work fine. Please let us know if you have any other questions or concerns.Best,Peter Hanniganplus24/Sanken323-845-1171

Q: 3. Do these fit the Sennheiser MKH 416?

A: Yes, these will work with the 416. Please let us know if you have any futher questions.Best,Peter Hannigan323-845-1171Sanken/plus24

Q: 4. What is the lowest profile / minimal shoe mount that will work with this mic? I want to attach it to the FX3 for Vlog'ing and want something small.

A: A mount such as BH #ROSM3R Rode SM3-R Camera Shoe Shockmount is a quality option that marries the desired characteristics of low profile, built-in shoe adapter, and shock absorption for use with the Sanken CS-M1 Moisture-Resistant Ultracompact Shotgun Microphone: https://bhpho.to/3K2vXlW

Q: 5. Does this work on the Sanken CS-3e on a Sony FX3?

A: Yes, the Sanken ROCS Rubber O-Rings cam be used with the Sanken CS-3e Short Shotgun Microphone and Sony FX3 Cinema Camera.

Q: 6. Will this work for the Sennheiser MKH8060 or is there a better choice for that?

A: The Rycote Standard Hole Classic Softie Wind-Screen (BH #RYS12M) is a better option for the Sennheiser MKH 8060.

Q: 7. Can I simply attach this to a shoe mount on the FX3 and use it?

A: Yes. The CS-M1 will work with the FX3

Q: 8. Will the o rings fit with the Rode NTG3 on AG-UX90 that the holder is set up for 21mm?

A: I use the o rings on an NTG3 on my canon c300 and it works well.

Q: 9. Will this work with the rode ntg2 and the canon c100 markII?

A: Yes, the Sanken rubber O-rings will work with the Canon C100 MKII to secure the Rode NTG2.

Q: 10. Would I need this for a Rode NTG-3 to put on a Canon XA-35?

A: Spacers such as the Sanken O-Rings will be required for the NTG-3 and most similar shotgun mics when mounting to a cameras built in mount such as the Canon XA35. These mounts are designed oversized to accommodate a wide variety of mics and mic types.