The white Sanken COS-11D Lavalier Mic with TA4F Connectoris a subminiature lav microphone designed to deliver clear, full-bodied sound and reliable performance, making it a popular choice among industry professionals in broadcast, TV, theater, film, videography, and more. 

Engineered to meet the standards of modern digital wireless microphone systems, the COS-11D is RF shielded to eliminate interference issues and ensure a pristine audio signal. The microphone capsule features a rectangular design that sits vertically, increasing the surface area and allowing this tiny mic to offer a rich, full sound that outperforms many larger models.

The mic's 50 Hz to 20 kHz frequency response rolls-off extreme low end and provides accurate, transparent audio reproduction with a small presence boost in the 6 kHz area for crisp, intelligible speech. With a forgiving omnidirectional polar pattern that picks up sound in a 360° pattern, levels stay consistent even when the subject turns away from the mic.

A water-resistant mesh screen protects against humidity, perspiration, makeup, bad weather, and other potential on-location issues, while the durable cable is also moisture-resistant and built to stay soft and pliable, even after extended use. This version of the COS-11D terminates in a TA4F connector and is wired for use with Trantec transmitters. Accessories are available separately and are not included with this configuration of the microphone.

For Broadcast, Film/Video & Presentation    Omnidirectional for Consistent Levels    For Trantec Transmitters with TA4M    -9 dB Reduced Sensitivity Level    Rugged 5.9' Cable Stays Pliable    RF Shielded for Digital Wireless    Water Resistant    Small Size Is Easy to Conceal    Requires 3 to 10 VDC

• Trantec: Works with Trantec bodypack transmitters equipped with a TA4M connector including the S5.5 Series.
• Also works with third-party wireless transmitters that are equipped to supply 3 to 10 VDC through a TA4M connector wired for Trantec compatibility.

Related Questions and Answers

Q: 1. Is this mic compatible to be used with a Denecke PS power supply? I'm having a problem, cause I just hear a loud hum noise and no transmitter signal. I tried it with other mics and transmitters, and I hear the same loud hum noise.

A: Yes, the Sanken CS-M1 can be used with the Denecke PS-1A or PS-2 which are both compatible 48V phantom power supplies. The Denecke PS-T is not compatible for use with the CS-M1 because it is a 12V "T-power" supply intended for use with older microphones that require lower voltage and the CS-M1 requires 48V phantom power.

Q: 2. Is this the latest version with ground protection?

A: Yes it is. This is the latest version of the Lentequip SafeTap Connector and it features Ground Protection.

Q: 3. What is the lowest profile / minimal shoe mount that will work with this mic? I want to attach it to the FX3 for Vlog'ing and want something small.

A: A mount such as BH #ROSM3R Rode SM3-R Camera Shoe Shockmount is a quality option that marries the desired characteristics of low profile, built-in shoe adapter, and shock absorption for use with the Sanken CS-M1 Moisture-Resistant Ultracompact Shotgun Microphone: https://bhpho.to/3K2vXlW

Q: 4. Does this has extreme wether proof design and RF rejection like NTG3 and Senn MKH416?

A: The Sanken is fairly robust in adverse weather, but it is not weather-proofed. Its directionality is comparable depending on the environment.

Q: 5. Hi, I just ordered this mic a couple weeks ago. So far it has not shown to turn on or record any audio, nor did I receive an instruction manual with it. I have plugged it into my canon 5d mark III and also a Zoom H5 recorder, and both have giving me no sound from the mic and some plug in noise. No levels are shown to record. I have not been able to find any troubleshooting pieces on line. Can you help me?

A: This microphone requires power you need to send it 48V

Q: 6. Would I need this for a Rode NTG-3 to put on a Canon XA-35?

A: Spacers such as the Sanken O-Rings will be required for the NTG-3 and most similar shotgun mics when mounting to a cameras built in mount such as the Canon XA35. These mounts are designed oversized to accommodate a wide variety of mics and mic types.

Q: 7. SmallRig battery

A: The Lentequip SafeTap Connector will work with any Battery brand that has a D-TAP/P-TAP connector on the battery. Assembly info: https://bit.ly/47J2JDP

Q: 8. I'm very fond of Sanken mics personally. Thus I wanted to ask how is the reach on this mic. Is there anything you guys could tell in that regards? I know it's not a shotgun mic, however it's Super Card.

A: It very similar to most of other shotgun mics (and it's a shotgun mic). Not as directional as Sennheiser 416, so I wouldn't recommend if you need to capture sounds outdoors very far away.

Q: 9. Will this work with the rode ntg2 and the canon c100 markII?

A: Yes, the Sanken rubber O-rings will work with the Canon C100 MKII to secure the Rode NTG2.

Q: 10. Will these fit a RDE NTG-3?

A: The Sanken O-Rings will fit a Rode NTG-3 and mics with a similar diameter 19-22mm.