The black Sanken COS-11D Omni Lavalier Microphone with Normal Sensitivity and LEMO 3-Pin Connector for Wisycom Transmitters is a subminiature lav microphone designed to deliver clear, full-bodied sound and reliable performance, making it a popular choice among industry professionals in broadcast, TV, theater, film, videography, and more. 

Engineered to meet the standards of modern digital wireless microphone systems, the COS-11D is RF shielded to eliminate interference issues and ensure a pristine audio signal. The microphone capsule features a rectangular design that sits vertically, increasing the surface area and allowing this tiny mic to offer a rich, full sound that outperforms many larger models.

The mic's 50 Hz to 20 kHz frequency response rolls-off extreme low end and provides accurate, transparent audio reproduction with a small presence boost in the 6 kHz area for crisp, intelligible speech. With a forgiving omnidirectional polar pattern that picks up sound in a 360° pattern, levels stay consistent, even when the subject turns away from the mic.

A water-resistant mesh screen protects against humidity, perspiration, makeup, bad weather, and other potential on-location issues, while the durable cable is also moisture-resistant and built to stay soft and pliable, even after extended use. This version of the COS-11D terminates in a 3-pin LEMO connector and is wired for use with Wisycom transmitters. Accessories are available separately and are not included with this configuration of the microphone.

For Broadcast, Film/Video & Presentation    Omnidirectional for Consistent Levels    For Wisycom Transmitters with LEMO    Normal Sensitivity Level    Rugged 5.9' Cable Stays Pliable    RF Shielded for Digital Wireless    Water Resistant    Small Size is Easy to Conceal    Requires 3 to 10 VDC

• Wisycom: Works with Wisycom bodypack transmitters equipped with a LEMO 3-pin connector, including the MTP 40 and MTP 41 (LEMO versions).
• Also works with third-party wireless transmitters that are equipped to supply 3 to 10 VDC through a 3-pin LEMO connector wired for Wisycom compatibility.

Related Questions and Answers

Q: 1. What did they upgrade in the G4 over the G3?

A: I had a G2 camera mount and now have the G4. The G4 comes with an upgraded lavalier and the electronics seem to be quieter overall. I have not yet used this mic in the real world.

Q: 2. Will the o rings fit with the Rode NTG3 on AG-UX90 that the holder is set up for 21mm?

A: I use the o rings on an NTG3 on my canon c300 and it works well.

Q: 3. Would I need this for a Rode NTG-3 to put on a Canon XA-35?

A: Spacers such as the Sanken O-Rings will be required for the NTG-3 and most similar shotgun mics when mounting to a cameras built in mount such as the Canon XA35. These mounts are designed oversized to accommodate a wide variety of mics and mic types.

Q: 4. Will this work with the rode ntg2 and the canon c100 markII?

A: Yes, the Sanken rubber O-rings will work with the Canon C100 MKII to secure the Rode NTG2.

Q: 5. Does this work on the Sanken CS-3e on a Sony FX3?

A: Yes, the Sanken ROCS Rubber O-Rings cam be used with the Sanken CS-3e Short Shotgun Microphone and Sony FX3 Cinema Camera.

Q: 6. Do these fit the Sennheiser MKH 416?

A: Yes, these will work with the 416. Please let us know if you have any futher questions.Best,Peter Hannigan323-845-1171Sanken/plus24

Q: 7. If I purchase a Sennheiser SKP 500 G4 Pro separately in the future, can it used with this EW 512 G4 model?

A: Yes, the Sennheiser SKP 500 G4 Pro plug-on transmitter is compatible for use with the EK 500 G4 Pro receiver that is included with the EW 512P G4 wireless lavalier system as long as both components operate on the same frequency band. You will need to purchase an SKP 500 G4 transmitter on the same frequency band as the EW 512P G4 system. The EK 500 G4 receiver can be used with only one transmitter at a time so you will have the option of using it with either the SK 500 G4 bodypack transmitter that is included in the EW 512P G4 system or using the SKP 500 G4 plug-on transmitter.

Q: 8. Can these lavalier be wirelessly connected to a soundboard?

A: Yes. The Sennheiser EW 112P G4 Camera-Mount Wireless Omni Lavalier Microphone System can be connected to a soundboard (mixer). The system comes with two receiver output cables, one with a 3.5mm connector and one with an XLR connector. You can use the cable with the XLR connector to send the output from the receiver into a mic input on the board.

Q: 9. Can I split the AF OUT of the EK500 with a 'Y' cable, run one side to my FX6's XLR, the other, to an onboard mini recorder? Thx.

A: Yes, you can use a Y-cable to split the output from a Sennheiser EK 500 Receiver to send the audio to two different devices, like two separate audio recorders, cameras, mixers, etc. You can use a cable like the Saramonic SR-UM10-CC1 3.5mm TRS to Two XLR Male Output Y-Cable for Wireless Mic Systems (B&H # SASRUM10CC1), or use an adapter like the ALZO 3.5mm Female to Dual XLR Male Stereo Microphone Adapter Cord for Pro Camcorders (B&H # AL130) together with the 3.5mm receiver output cable and, if needed, additional XLR cables to extend the length.

Q: 10. Can I wire a 3.5mm end to this?

A: Yes, the CUB-01 Boundary Microphone (Beige) comes unterminated and can be terminated with a 3.5mm TRS connector.