Designed for adding a secure rigging point wherever one is needed, the Kupo Super Viser Clamp End Jaw 9 Inchfrom Kupo Super Viser Clamp End Jaw 9 Inchis a highly useful accessory on set or in the field. The clamp has a 9" main bolt with a machined chamfered slot to prevent its jaws from rotating when in use. Each clamp jaw is covered in a removable rubber surface that guaranties objects hold fast and aren't scratched.

Steel and Aluminum Construction    66.1 lb Load Capacity    Hex Receiver and 5/8" Knurled Pin

Designed for adding a secure rigging point wherever one is needed, the End Jaw, 9" Super Viser Clamp from Kupo is a highly useful accessory on set or in the field. The clamp has a 9" main bolt with a machined chamfered slot to prevent its jaws from rotating when in use. Each clamp jaw is covered in a removable rubber surface that guaranties objects hold fast and aren't scratched.

Each clamp jaw is covered in a removable rubber surface that guaranties objects hold fast and aren't scratched. Unlike some clamps whose grip pads are glued, the rubber pads of the Super Viser Clamp are mechanically interlocked into the aluminum jaws to help maintain proper grip over longer lifetimes. Capable of handling items weighing up to 66.1 lb, the clamp has a knurled 5/8" pin at one end and a hex receiver at the other for additional mounting options. A convenient hex socket is available on the terminal end of the jaws, and is compatible with Convi or Super Clamps for additional mounting options.

Related Questions and Answers

Q: 1. What is the biggest size pipe that this can fit on?

A: The Impact 6" End Jaw Vise Grip has a 6inch opening.

Q: 2. Hi, help me understand whether that rail could be used for macro / close-up shots. I understood it's only adjustment of camera's position height relatively to object photographed (instead of extending the tripod's central column). Right?

A: It could technically be used for macro photography, the difference between this and an actual macro head is that a macro head has a knob that can mm by mm move the camera forward or backward to make precise adjustments. If you use this, it has the markings of where you need to move it to, but it doesn't have the knob to make the micro adjustments.

Q: 3. Would this size fit a combo stand?

A: Yes this clamp can be fitted to a combo stand.

Q: 4. Can this fit onto a 1.5" diameter pipe or is it limited to 1.4" maximum diameter?

A: The Kupo 3-Way Clamp is limited to a 1.4" pipe.

Q: 5. Does this come with a wedge to use with flat surfaces?

A: No, but the design allows you to clamp on flat surfaces securely.

Q: 6. can this support a 30 lb monitor?

A: Yes. The following unit will support a 30lbs monitor.

Q: 7. Other than $10, what is the difference between this and the Really Right Stuff Mobile Phone Clamp with Pocket Stand?

A: The Really Right Stuff Mobile Phone Clamp with Dovetail Jaw and Pocket Stand BH #REWPOCKETSTD has a 1.5 quick-release dovetail jaw which lets you directly mount your device to compatible ball heads and other devices.

Q: 8. How do I remove the pin on the jaw clamp in order to add this extender?

A: The 5/8 pin on the Matthellini End Jaw clamp is not removable. The Extendellini is designed to widen the jaws of the Center Jaw Matthellini PN:420100. The turn knob and bottom jaw are removed from the shaft, Extendellini is fixed onto the end of the shaft and the turn knob and jaw are mounted onto it.

Q: 9. What is the depth of this rail?

A: The depth of this rail is approximately 1/2"

Q: 10. Will this support both portrait and landscape orientations on a 3 way head?

A: Yes, the Really Right Stuff Mobile Phone Clamp with Dovetail Jaw BH #RECLMPWTHDOV supports both portrait and landscape mode.