Ram Mounts Medium Tough-Claw 1" Rubber Ball Bulk Packaging

Ram Mounts Medium Tough-claw 1" Rubber Ball Bulk Packaging

Product Code: eq177552
Availability: In Stock

$122.97 $148.79

Qty

9 reviews Write a review

Description
Reviews (9)

Complete or expand your RAM mount system with the RAM MOUNTS Medium Tough-Claw with 1" Diameter Rubber Ball. This tool-free clamp lets you attach your electronics onto round, square, or oddly-shaped rails, bars, and tubes from 1 to 1.875" in diameter. It also clamps onto flat surfaces up to 1.6" thick. Designed for durability, the Tough-Claw is made from high-strength composite materials and stainless steel. It is designed for use with other RAM mounting components (sold separately).

Tool-Free Installation Clamps to Odd-Shaped Rails, Bars, Tubes Clamps to Flat Surfaces Composite & Stainless Steel Construction Made in USA Limited Lifetime Warranty

Parameters
Ball	1" rubber ball "B" size
Material	Composite, stainless steel
Clamp Range	Tubes 1 to 1.875" (2.54 to 4.76 cm) in diameter Flat surfaces up to 1.6" (4.1 cm) thick
Dimensions	Height: 5.25" (13.3 cm) Width: 1.56" (4 cm)
Weight	9.6 oz (272.2 g)
Packaging Info
Package Weight	0.605 lb
Box Dimensions (LxWxH)	5.25 x 3.4 x 2.25"

High strength glass filled nylon construction with corrosion resistant stainless steel hardware

Rubber pads provide stable, even gripping and protection of mounting surface

Clamp jaw is configured for round, flat and odd shapes

Quick installation and removal of Tough-Claw

Made in USA

Related Questions and Answers

Q: 1. I NEED TO STORE ALSO 5X7 PHOTOS IN THIS BOX, CAN I??

A: You could only store 4 x 6" prints in the Lineco 613-1512 Bulk Photo Storage Box (Without Envelopes, 15.5 x 12 x 5", Black).

Q: 2. Can you use 2 of these cards in the a1? Basically, can these be used in SD slots? Thank you

A: Yes, dual memory card slots in the Sony A1 both accept either CFexpress Type A or SD-type memory cards.

Q: 3. does it work in A9ii?

A: It is not compatible with the A9II. The A9II uses SD cards such as this: https://bhpho.to/3arL2OY

Q: 4. How much footage could I fit on a 160GB card with the Sony A7siii using 120fps S&Q mode? Seems like it's the main purpose of this card so just wondering how to calculate how much footage will fit and if I opt for the 80GB or 120GB. Cheers.

A: Approximately 4 GB per minute at 4k video

Q: 5. Does this work with Nikon D850?

A: With a firmware update to the D850, it should work with CF express cards but the firmware is not out yet. Once Nikon makes the firmware available, then those cards should work.

Q: 6. Can I use the Sony 80GB CFexpress Type A TOUGH Memory Card for recording 4K120 S&Q XAVC S-I on the Sony a7S III?

A: Yes, one can definitely use the Sony 80GB CFexpress Type A TOUGH Memory Card to record S&Q XAVC S-I 4K 120p on the Sony a7S III Mirrorless Camera.

Q: 7. I hope CF Express is possible to read from Sony A7S III USB-C port so it is not a must to buy Sony MRW-G2 CFexpress Memory Card reader?

A: Yes, with the Sony 160GB CFexpress Type A TOUGH Memory Card installed in the Sony a7S III Mirrorless Camera, one can copy files off the card via the cameras USB out. A card reader is not absolutely necessary.

Q: 8. is 4GB DDR3-1333 PC10600 compatible to hp G62-225dx?

A: No. My documentation shows that your system uses PC2 5300 RAM. The proper 4GB chip for your system can be found here: a href= http://bhpho.to/1sUNFxZ target= _blank http://bhpho.to/1sUNFxZ/a

Q: 9. Will this card work on the A7SIII?

A: Yes. The Sony 1920GB CFexpress Type A TOUGH Memory Card is compatible with the Sony A7S3 camera.

Q: 10. With the A7IV, will this benefit from the fast write speed if shooting to an SD in slot 2, or will it be limited by the slower card?

A: The following card will provide quicker performance benefits record in a variety of video resolutions, bit-rates, and compressions, as well as high-resolution continuous raw photo shooting then any SD card on the market. If you are shooting demanding video its one of the best solutions to look into.

anyonymous	12/08/2024
[0.605 lb] I wasn't sure how this would work. Sometimes gear like this looks good quality in a picture then you realize when you get it, it's made of a low quality plastic. This is well made and works well. Only thing it is missing is spring loaded clamp so that it holds in the open position as you loosen the jaws. 5

Phillip	06/08/2024
[0.605 lb] A solid piece for your RAM Mount system if it requires mounting to a tube up to 1 1/2 inches thick. Stays solid once mounted, you can tighten it pretty good without over-tightening the knob. Allows you to put your system in different areas where tubing exists. Recommended. 5

Lance Romance	02/07/2024
[0.605 lb] Works perfectly, mounts on my Harley handlebars nice and tight and does not shake free from the vibration. 5

Braten	22/05/2024
[0.605 lb] I'm using this to attach a cell phone to the handlebar of a motorcycle It holds very firm and does not move once tightened. However be aware that even if it is a size "small" it is a little larger and bulkier than it looks. 5

Poppy	15/05/2024
[0.605 lb] I purchased together the RAM Small Tough-Claw, Short Double Socket Arm, and Universal X-Grip for Large Phones as a phone holder for my car. I cannot convey how sick I am of suction cups and other cheap fasteners that fall off or break while I’m driving. This package clamps (no drilling) on the lip of the dashboard above the screen. It is SOLID. I can get it in the perfect position and it doesn’t even vibrate. I could not recommend it more. 5

Shai	03/05/2024
[0.605 lb] very good 5

Baldy	27/04/2024
[0.605 lb] Good Price , fast delivery , I use them to clamp on 1 rail , led flood lights 2lb each, very sturdy, jaws open adequatly. Solid piece of hardware 5