Amimon Futaba Ppm Cable For Connex Ground Unit

Product Code: eq177570
Availability: In Stock

$30.00 $47.10

Qty

13 reviews Write a review

Description
Reviews (13)

Connect a compatible Futaba remote control (sold separately) to your CONNEX Ground Unit receiver with this Amimon PPM Trainer Port Cable. Once the connection is established with this cable, you can use your Futaba remote to control the camera gimbal on your aircraft.

Note: PPM support was added in software version 2.0.x for the CONNEX Ground Unit. Please make sure that your software is updated before use.

Connects Futaba Remote to Receiver For CONNEX Ground Unit Control Aircraft Camera Gimbal

Parameters
Compatibility	CONNEX Ground Unit Receiver
Software Requirements	2.0.x or later
Cable Length	5.9' / 1.8 m
Packaging Info
Package Weight	0.05 lb
Box Dimensions (LxWxH)	4.6 x 3 x 0.3"

Related Questions and Answers

Q: 1. Does anyone know where I can source power cables for the transmitter? Would like to make some Anderson Powerpole and Anton Bauer connectors.

A: The transmitter comes with XT-60 power connector. If you purchase an XT-60 to DC jack adaptor, you'll be able to use a standard P-tap to DC jack cable

Q: 2. Can I use on sender and 4 reciver ? I need to connect 4 led screens in a concerts

A: Yes. You can connect up to 4 CONNEX receivers to one CONNEX transmitter. Video quality will not be affected and there will be no delay on all receivers.

Q: 3. Does the receiver's HDMI output provide a clean video feed with no on-screen overlays?

A: There is an overlay on the bottom of the screen. It has useful info like signal strength. As far as I can tell there is no way to override this function for a clean recordable image.

Q: 4. Would like ask if you have a kit, that has a receiver, transmitter and a battery power?

A: You can find a bundle that includes the Amimon CONNEX Nano HDR Camera, a transmitter, and a receiver here: https://bhpho.to/3rIoYIi.

Q: 5. can you use more then one UAV in the same physical space ?

A: The transmitter can link to up to four receivers, for example allowing the pilot and camera operator to each have their own monitor or FPV goggles (additional receivers available separately).Under optimal conditions two or three of these paired systems should have enough operating variance to function in a large outdoor, open space under optimal conditions. Be aware that we have not tested this function nor are there published specs detailing this operation. Please contact the manufacturer directly for details:USA, AMIMON INC2025 Gateway Pl. Suite 450San Jose, CA 95110Tel: 408-4904686contact@a href= http://amimon.com target= _blank amimon.com/aa href= http://www.amimon.com/contact target= _blank http://www.amimon.com/contact/a

Q: 6. how much does the transmitter weigh?

A: The part that goes in the air is 130 grams, and the ground unit weighs 260 grams

Q: 7. does this unit also transmit the sound channel that is inside the hdmi feed?

A: I read in a forum, not sure which, FPVlabs maybe, that is does not send the audio. I believe Connex said they have something that does send audio but I never looked into that. You would have to ask Amimon Connex. They are very helpful with questions. They sent me an upgraded cable to get additional NAZA info to show in the OSD at no charge. I have not tried it yet. I need a part from Team Black Sheep, or modify the one I have so the HDMI ribbon cable will fit. I tried it on my 250 mini quad and it was like watching a Blu-Ray video with no lag but that's not what I bought it for. Don't want to crash with such high dollar electronics, mini quad has no GPS or return to home ability. Brad

Q: 8. anyone know if this setup be used ground to ground with a regular hdmi output camera for remote focus capability?want to have a remote focus puller viewing camera feed.

A: Youd be better off with the Connex mini since the full sized one has a LOUD fan. Im flying a Connex Mini on a Ronin-M.

Q: 9. what is the video supported color sampling ? is it support 4:2:2 color sampling?or less ?

A: CONNEX was designed for high end aerial photography. As such, it does support 4:2:2 color sampling.Please note it also supports 4:4:4 color sampling.

Q: 10. Will this work for Connex Mini Ground Unit?

A: No. For CONNEX mini Ground unit there's another mount.

Didier	07/09/2024
[4.6 x 3 x 0.3"] This is what you need if you would like to power up your Connex Transmitter, right from any P-Tap, or like me, directly from the DJI Ronin P-Tap, that is right under the camera. So you don't have a lot of unnecessary wire length. Used it for 3 days in a row at a large venue, and got no problem at all. 5

Rob	17/08/2024
[2.0.x or later] Great product! Amazing HD Video with low latency. I used this along with the Silencer Fight Follow focus from 24shots. With this HD link adjusting focus and zoom was very easy. Great combo 5

Didier	11/08/2024
[4.6 x 3 x 0.3"] Perfect replacement antenna for both Connex unit. I was tired of using the wired antenna that came with the original kit, so I bought those so I could have rigid antenna on the transmitter, and that still gives me 3 backup antenna for either receiver or transmitter. Work as well as original. 5

Chad	16/07/2024
[4.6 x 3 x 0.3"] The Connex wireless systems have worked perfectly for us. We use them for small, wireless cameras in a sports venue. It only has to push video around 400 feet, but it's in an area with lots of RF interference and around 12,000 people. We're running at 1080p with no frame drops. 5

Eric	09/07/2024
[2.0.x or later] Excellent 5

Alon	23/06/2024
[0.05 lb] Great, cheap cable that lets you use lipos to power the ground station. This is super useful if you have a MOVI, as the Freefly Movi batteries use a JST connector and can power your ground station as well. 5

Tom	22/06/2024
[2.0.x or later] 110' of boom, 10 HD monitor in the operator cab, a Mokose HD teaching camera on a weighted boom that always points down the crane's loadline. My only issue has been finding the right batteries. I currently (haha) have two 7 AH Lipo Dakota's, wired in parallel, plus 2 10 watt PV panels, with a charge controller. My system has been in operation for almost a year, and I am putting two more togther for friends in the crane business, as it has helped me so much. Every issue I have had while getting the bugs out, ended up being battery related. The transmitter is located in a PVC junction box, along with the batteries, no crane modifications were needed (or allowed), I have about 3K in the entire system and it's worth every penny, just in stress relief by being able to SEE! 5

Mike	14/06/2024
[2.0.x or later] Solid as a rock, never drops signal. 5

Override Films	28/05/2024
[0.05 lb] We use the Connex on almost every production we're on. Its plug-and-play, simple, lightweight, reliable, easy to add multiple receivers, affordable, and it just works awesome. We have broken a few of the antenna on the transmitter. You might want to pick up a few backups of those. 5