Yongnuo Yn-622N Wireless Flash Transceiver For Nikon

Yongnuo Yn-622n Wireless Flash Transceiver For Nikon

Product Code: eq177579
Availability: In Stock

$237.00 $298.62

Qty

8 reviews Write a review

Description
Reviews (8)

Get started with advanced wireless flash control by picking up this Yongnuo YN-622N Wireless Flash Transceiver for Nikonfrom Yongnuo, which bundles together a YN-622N Transceiver with the YN-622N-TX Controller. Compatible with Nikon i-TTL cameras, the controller slides directly into the hot shoe and utilizes a 2.4 GHz frequency with a range of 328' to trigger the remote flashes. The controller also has TTL, manual, and multi flash modes available for full creative control of a flash unit mounted on the YN-622N Transceiver. Additionally, the system can utilize 7 channels and 3 groups for setting up multiple flash units easily and efficiently.

The YN-622N-TX utilizes an LCD screen to display settings and allow users to make adjustments. On the device is also an AF assist beam to help in low-light conditions. Multiple sync modes are available for more specific needs or effects, including 1st and 2nd curtain sync. A high-speed sync mode will help in bright lighting conditions and for stopping motion with a maximum speed of 1/8000 second. A built-in mini-USB port enables firmware updates to be installed, and the device runs on 2 AA batteries.

The transceivers have a hot shoe and PC sync port available for mounting a flash unit. The YN-622N also utilizes a series of LEDs to display settings and allow users to make adjustments. On the device is also an AF assist beam to help in low-light conditions. Multiple sync modes are available for more specific needs or effects, including 1st and 2nd curtain sync. A high-speed sync mode is available when a flash is connected via the PC sync port and will help in bright lighting conditions and for stopping motion with a maximum speed of 1/8000 second. Additionally, the transceiver runs on 2 AA batteries.

Compatible with Nikon i-TTL Frequency: 2.4 GHz Range: 328' TTL, Manual, and Multi Flash Modes 7 Channels, 3 Groups Transceiver with Hot Shoe & PC Sync Port LCD Screen, AF Assist Beam High Speed and 1st- and 2nd-Curtain Sync USB Port for Firmware Updates Each Device Runs on 2 AA Batteries

Key Specs
Channels	7
Groups	3 (A, B, C)
Wireless Range	328' / 100 m
Inputs/Outputs	1x PC Sync 1x 2.5 mm (Camera Shutter) 1x Mini-USB
Battery Type	4x AA
Wireless
Channels	7
Groups	3 (A, B, C)
Wireless Range	328' / 100 m
Radio Frequency	2.4 GHz
General
Control Modes	Manual, Multi, TTL
Sync Speed	1/8000 Sec
Connectivity
Inputs/Outputs	1x PC Sync 1x 2.5 mm (Camera Shutter) 1x Mini-USB
Electrical
Battery Type	4x AA
Physical
Dimensions	Transmitter: 3.5 x 2.1 x 1.5" / 9 x 5.3 x 3.9 cm Receiver: 3.5 x 2.1 x 1.5" / 9 x 5.3 x 3.9 cm
Weight	2.9 oz / 82 g (Transmitter) 2.8 oz / 78 g (Receiver)
Packaging Info
Package Weight	0.6 lb
Box Dimensions (LxWxH)	5.6 x 5.4 x 2.1"

Related Questions and Answers

Q: 1. Does it work on a nikon d5?

A: I use this product with my Nikon d5300 and d7200... Working perfectly but I don't know about how it supports with Nikon D5...

Q: 2. Do I need 2 of these? Do I need one for camera and one for flash?

A: This kit is enough to accommodate a single Nikon flash and a single Nikon DSLR/Mirrorless camera for wireless flash triggering in TTL.

Q: 3. Can I use this to wireless adjust the power output of my Neewer TT560 flash?

A: Yongnuo has tested this kit with Nikon brand flashes only. With that being said, we cannot guarantee compatibility with another brand of flash. Your results may vary.

Q: 4. Does a Nikon flash need to be in manual or TTL mode for this?

A: Flash set to TTL. Then the controller is in command.

Q: 5. Will this work with both Nikon D610 & D700 cameras, along with a Nikon SB 700 speed light?

A: I have a D610 and a D7000 and use a Nikon SB910 and it all works. So I would assume it should work for you.

Q: 6. Does this work with any flash unit? I have Nikon SB-800

A: Yes, the Yongnuo YN-622N i-TTL Wireless Flash Transceiver & TX Controller Kit for Nikon would be compatible for use with the Nikon SB-800 Speedlight Flash.

Q: 7. Can I can buy/get extend warranty for the TN-622N i-ttl ?

A: Upon clicking the blue Add To Cart button on our website, the pop-up screen that appears will list the SquareTrade Protection Plans that are available for purchase. There are both 2-Year Drops & Spills as well as 3-Year Drops & Spills protection plans available for this item.

Q: 8. does it work on a nikon d750 and metz 64 af-1?

A: Works great for my d750 and sb700

Q: 9. Can I use it with Nikon D5300 camera?

A: I use it with Cannon 5DM3 camera. it's very Good products.

Q: 10. I have a Nikon for photography and a Canon for movies. If I need, eventually, wear this kit on my Canon, did it will work? I know that probably the TTL wouldn't worked, but in manual mode, would I controller normally? I have one Nikon Sb900 and two YongNuo 565ex (for Nikon). My intention when necessary, is use one of my YN565EX with this YN622II on my Canon.

A: I am not 100% sure, but YongNuo markets specific models for Nikon and Canon so I doubt this Nikon model would work on a Canon body

Juan	26/09/2024
[3 (A, B, C)] So far they work as advertised. very good value for money. 5

Dennis	28/08/2024
[2.4 GHz] An inexpensive solution for off-camera speed light control. 5

Jose	27/08/2024
[2.4 GHz] This work really good! I'm very happy 5

Norman	01/08/2024
[4x AA] Works great right out of the box! 5

Bob	21/07/2024
[1/8000 Sec] Worked as advertised in TTL and manual mode. Easy to attach to camera and flash. Simple to identify group and channel separately. 5

Ron	17/07/2024
[1/8000 Sec] These work great! Easy to program and easy to use! 5

anyonymous	28/06/2024
[3 (A, B, C)] Received in good condition and also one day before the expected date for the delivery... Thanks and the item is working well.. 5