Magenta Hd-One Dx-500 Hdmi Extender Kit

Magenta Hd-one Dx-500 Hdmi Extender Kit

Product Code: eq177603
Availability: In Stock

$1,940.40 $2,638.94

Qty

17 reviews Write a review

Description
Reviews (17)

You can add greater distance between your high-definition A/V source and display with the HD-One DX-500 HDMI Extender Kit from Magenta Research. This kit consists of a transmitter and receiver unit, and 5 VDC universal power supplies for each unit. The transmitter and receiver units can be placed up to 500’ apart and connected via a Cat-6 cable (sold separately) to transfer high-definition video and audio signals.

The extender supports video resolutions up to WUXGA (1920 x 1200) at 60 Hz, so you need not worry about compromised video quality. In addition, even the audio quality is preserved since the extender offers support for Dolby TrueHD and DTS-HD Master Audio.

For safe video/audio transmission that is protected from unwanted access, the extender supports HDCP encryption. Further, with improved heat dissipation, low power consumption, and appreciable resistance to emissions and interference, this extender provides noise-free transmission and is also environmentally friendly.

HDMI Video/Audio Transmitter & Receiver Transmission over Single Cat-6 Cable Supports a Resolution of 1920 x 1200 Extends Signals up to 500' (152m) HDCP Encrypted Transmission Supports Dolby TrueHD & DTS-HD Universal 5 VDC Power Supply LED Status Indicators

Connectors
Video In	Transmitter & Receiver: HDMI Type A
Audio In/Out	Embedded with video signal
Power	Transmitter/Receiver: 1 x DC power
UTP In/Out	RJ45 Connector
General
Video Supported	HDMI 1.4, HDCP compliant DVI video modes Standard formats @ 60 Hz: 640 x 480, 800 x 600, 1024 x 768, 1152 x 864, 1280 x 768, 1280 x 960, 1280 x 1024, 1360 x 760, 1366 x 768, 1600 x 1200,1680 x 1050, 1920 x 1080, 1920 x 1200 HDTV: 480p, 720p, 1080i, and 1080p
Resolution	WUXGA 1920 x 1200 @ 60 Hz Note: To achieve maximum resolution and/or distance, it is strongly recommended that you use standard network Cat-6 or better cable with a solid 24 AWG copper wire. The use of lower quality cables will lower overall performance. Please contact Magenta for cable recommendations.
Audio Support	HDMI 1.3 Audio: SPDIF 2-channel PCM or 5.1, 6.1 Dolby Digital or DTS
Transmission Distance	500' (152 m) Note: To achieve maximum resolution and/or distance, it is strongly recommended that you use standard network Cat-6 or better cable with a solid 24 AWG copper wire. The use of lower quality cables will lower overall performance. Please contact Magenta for cable recommendations.
Bandwidth	3.4 Gb/s
Cables Supported	Cat-5e, Cat-6, Cat-6a, Cat-6e, Cat-7 UTP, STP, or FTP (Cat-6 or better is recommended) Note: For best performance, use one continuous UTP / STP or FTP cable with as few breaks as possible (i.e., patch bays, wall plates, or floor boxes). Magenta recommends mounting and connecting all cables to the HD-One DX500 Series components before applying power. Make sure that the Category cable you intend to use has been tested to comply with the T568B wiring specification. Magenta recommends that all Category cables be pre-terminated and tested. Cables terminated on-site or in an existing infrastructure should be tested before use to ensure compliance with the TIA-EIA T568B specification. Using incorrectly terminated category cables can damage the extender units.
Enclosure	Metal
Indicators	Video status, data link, power
Compliance	RoHS, CE, FCC Class A
Power Requirements	Each Unit: 5 VDC @ 2.6 A maximum
Power Consumption	1,200 mA maximum
Temperature Tolerance	Operating: 32 to 131°F (0 to 55°C) Storage: -4 to 185°F (-20 to 85°C)
Humidity Tolerance	Up to 95% non-condensing
Dimensions	Each Unit: 3.2 x 1.9 x 1.0" (82.0 x 48.6 x 24.8 mm)
Weight	Each Unit: 0.30 lb (0.14 kg)
Packaging Info
Package Weight	1.955 lb
Box Dimensions (LxWxH)	9.5 x 8.15 x 2.65"

Consists of a transmitter and receiver unit, and 5 VDC power supplies for both units

Extends uncompressed HD video (1920x1200 @ 60Hz) up to 500' (152m)

Supports embedded HDMI audio, including Dolby TrueHD and DTS-HD Master Audio

HDMI 1.4 and HDCP compliant

Works over a single Cat-5e, Cat-6, Cat-6e, Cat-7 UTP, STP, or FTP cable

Single UTP cable (sold separately) transfers video, audio, and HDCP signals

LED indicators for video status, data link, and power on both transmitter and receiver units

Integrated mounting flange

Tolerances designed for commercial environments

Typical applications include museums; large retail environments; high-end security, education, and residential environments; digital signage, wayfinding installations; and home theater

Related Questions and Answers

Q: 1. Hello, can I use multiple receivers with one transmitter?

A: The Vaxis ATOM 500 will connect to one receiver and a mobile device.

Q: 2. Can the receiver be powered from a v-mount using a tilta v-mount to l-series adapter?

A: Yes, A V-mount battery with the Tilta Sony L-Series to V-Mount Adapter Battery Plate can power the Vaxis Atom 500.

Q: 3. how much is latency?

A: This is rated at 80 ms for latency. It is very low in latency.

Q: 4. The transmitters keep getting very hot and the picture freezes..how can we overcome this?

A: Wireless video transmitters tend to get hot without much of a workaround. It might be best to move onto a system with built in heat syncs similar to teradek.

Q: 5. Does it transmit audio and video together

A: The signal on the Vaxis ATOM 500 SDI Wireless Video Transmitter and Receiver Kit (SDI/HDMI) regardless of SDI or HDMI carries both the audio and video together.

Q: 6. What's the transmission frequency?

A: US: 5.1 to 5.9 GHz

Q: 7. Is it possible to power the TX with V-mount?

A: Yes, it is possible to power the transmitter with a V-mount battery.

Q: 8. if tx is using hdmi, could rx transmit via sdi?

A: The RX could output via SDI or HDMI.

Q: 9. These units look like the two mounting holes on the front have been removed (the HDMI version has them). Is this correct? Cheers

A: The photos are accurate and the mounting holes are on the bottom of the units.

Q: 10. latency is ?

A: This is rated at 80 ms for latency. It is very low in latency.

Craig	19/09/2024
[Metal] Worked flawlessly over cat5e cable. Saved us having to run new cable 5

Ben	17/09/2024
[Metal] Wow, I’m amazed with this quality and speed of these HDMI extender transmitters. I didn’t know there was such amazing high-quality technology like this out there I would definitely recommend.!! 5

James	19/08/2024
[Metal] Bought this to go between BMPCC 6K and an ATEM MINI Extreme ISO. It worked perfectly! You are still able to have camera control through this system from the ATEM. I can start and stop recording, adjust focus, and color settings without any issues. I did not notice any additional lag other than from typical HDMI lag. In other words, the KanexPro did not add any lag to the feed that was noticeable. 5

Mike	27/07/2024
[3.4 Gb/s] These things are awesome. Get a full quality image coming across from what I can see. Very easy to install and quick to connect. Only wish it came in a kit with a remote mouse as well. 5

Jp	05/07/2024
[Metal] These are great! I have used KanexPro extenders for all my installs for the past 4 years and have had only 1 issue and KanexPro made it right quickly and at no cost because of their great 3 year warranty. I highly recommend them! 5

Brenda	04/07/2024
[RJ45 Connector] excellent betty good 5

Darby	23/06/2024
[1.955 lb] I've been using these weekly in a church setting for 4 years now in a 250 foot CAT6 cable run, and they have been completely solid. I bought these at the recommendation of an A/V consultant to replace some converters that often cut out, and I have been fully satisfied. 5

Brett	22/06/2024
[3.4 Gb/s] Very solid high quality extender!!!! 5

Nijaz	14/06/2024
[1.955 lb] The device works exactly as it is described. I am extremely pleased. 5

Craig	11/06/2024
[1.955 lb] No installation problems at all. Ran the Cat6 line, terminated, plugged in and instant picture. I am running 110' with this setup and have zero problems. 5