Power your SkyPanel series fixture with this 10' ARRI PowerCON to Edison Cable for SkyPanel Lights 10ftfrom Arri. This cable is included with select fixtures and is available here as a replacement or spare.

Connects Fixture to Power Source

Related Questions and Answers

Q: 1. How does this work? Can I attach my Godox bowens softboxes to an Elinchrom flash?

A: It will allow softboxes of this style https://bhpho.to/2EWfe4e to be used with Elinchrom. The ring is pushed under the edge of the softbox to hold it in place.

Q: 2. What is the outer ring diameter?

A: 142mm/5.59" inch. The lip is 3.30mm/.129" inch This was to big and did not fit my speed ring where the insert diameter on that one measures to 139-140mm. Although it states Bowens S, it does fit the mount on my strobe. There are slight tolerances between some of the Bowens accessories so this may or may not fit exactly.

Q: 3. Will this run a Skypanel at 100% power?

A: Hi Robert, This is a battery mounting plate. The plate requires two 26V Gold Mount Plus batteries to power the ARRI SkyPanel S-30C at 100% maximum or the S-60C at 50%. The dual mount supports two Dionic 98Wh batteries, and it also accepts Dionic 26V 240Wh Gold Mount Plus batteries. Here are the links to the batteries: https://www.bhphotovideo.com/c/product/1503678-REG/anton_bauer_8675_0155_dionic_98wh_26v_battery.html https://www.bhphotovideo.com/c/product/1503679-REG/anton_bauer_8675_0156_dionic_240wh_26v_battery.html

Q: 4. I need a ring to fit the Godox cloapsible softboxes in Elinchrom strobes. Can you say me the outside diameter? I need a piece with 6 or 15,5 cms.

A: I found this ring to not be wide enough for my Godox softboxes. If you have the S-Type speedlite mounts for reference, this is about an inch narrower and doesn't hold the box on as well as they do. Sorry that I don't have the exact diameter for you at the moment.

Q: 5. Would this work to mount this godox sb #GOSGGV6060 on a monolight receiving a bowen s mount. If not which speedring would work?

A: The Godox Speed Ring for Bowens Lights BH #GOSABW can be used with the softbox in the BH #GOSGGV6060 kit.

Q: 6. Can this plate mount directly to the back of the light, like the 14.4v and 48v plates?

A: This plate comes with a clamp to attach it to the column of a light stand.

Q: 7. What outer rings does this work with?

A: The Godox Speed Ring for Bowens Lights is specific ring to be used with these softboxes, https://bhpho.to/3diAWE0 .

Q: 8. Would this fit on a Aputure C300d?

A: Yes this ring is compatible with lampheads that use a Bowens S mount attachment like the Aputure C300D.

Q: 9. Will this allow me to mount a Godox AK-R21 Projection Attachment for Flash Heads on to my Elinchrom Ranger Quadra flash head?

A: No, The AK-R21 is designed with two types of mounting rings to connect either round head or normal Fresnel head. So it’s compatible with AD200Pro (round head and Fresnel head), AD100Pro, V1 and nearly all the camera flashes across brands.

Q: 10. I'd like an accurate "measured" diameter in millimetres of this speeding insert... not just reporting of what the spec's are?

A: The Godox Speed Ring for Bowens Lights is a speedring and the diameter is not listed. It is made to only work with specific Godox softboxes like, Godox S-Type Bowens Mount Flash Bracket with Softbox Kit (23.6 x 23.6") BH #GOSFUV6060.