This 3', blue Nebtek Thin BNC HD Video Cable 3ft Blueis a low-profile, multipurpose cable designed to provide reliable video-signal connections for installs in mobile production trucks or for security camera and webcast systems. It is also well suited for building multichannel video snakes.

The cable is rated for 1080p HD video signal. It is terminated with BNC connectors on both ends.

Thin Cable for Installs/HD Video Snakes    For 1080p High-Definition Video    BNC Connectors    Built with VDM-230 Cable

• Low-attenuation cable with reduced size and weight (18 lb/Mft)
• 4.5 GHz bandwidth for HDTV
• Utilizes a pure-copper center conductor, low-loss foam dielectric, and broadband foil and braid shielding
• Gas-injected dielectric ideal for standard-definition digital video and high-definition digital video interconnect within mobile production trucks
• Solid conductor 23 AWG
• Low attenuation and return loss
• Precision 75-ohm impedance
• Full copper braid & foil shield
• 100% sweep tested

• Ideal for remote broadcast interconnect
• High-definition serial digital video
• SDI serial digital video
• High-resolution analog video

Related Questions and Answers

Q: 1. Does this allow for a Teradek Receiver between the Battery Plate and the Monitor Cage?

A: That will all depend on the exact Receiver being used, but yes this product does come with a Spacer that will make it possible. Here is a photo that demonstrates the space available. https://bhpho.to/2O1gx5F

Q: 2. What screw sizes are needed for the back panel?

A: The battery plate mounting holes are 4-40.

Q: 3. how much does the transmitter weigh?

A: The part that goes in the air is 130 grams, and the ground unit weighs 260 grams

Q: 4. Does anyone know where I can source power cables for the transmitter? Would like to make some Anderson Powerpole and Anton Bauer connectors.

A: The transmitter comes with XT-60 power connector. If you purchase an XT-60 to DC jack adaptor, you'll be able to use a standard P-tap to DC jack cable

Q: 5. When calibrating, does this monitor store calibration data in the display, or via LUT?

A: The ViewSonic 15.6" VP16-OLED Thin Portable Monitor stores calibration data in the LUT.

Q: 6. can you use more then one UAV in the same physical space ?

A: The transmitter can link to up to four receivers, for example allowing the pilot and camera operator to each have their own monitor or FPV goggles (additional receivers available separately).Under optimal conditions two or three of these paired systems should have enough operating variance to function in a large outdoor, open space under optimal conditions. Be aware that we have not tested this function nor are there published specs detailing this operation. Please contact the manufacturer directly for details:USA, AMIMON INC2025 Gateway Pl. Suite 450San Jose, CA 95110Tel: 408-4904686contact@a href= http://amimon.com target= _blank amimon.com/aa href= http://www.amimon.com/contact target= _blank http://www.amimon.com/contact/a

Q: 7. Is the PCIe HDMI card an HDMI-in ?

A: Sorry, but the answer is no. The PCI card is used only for connection to the interface. It does not pass a raw HDMI signal.

Q: 8. could you double up the plate to carry a heavier system?

A: Hi Nicholas, For any DSLR/lens combo, we recommend our SpiderPro Single Cam System. This is the best and most comfortable way to handle this typoe of weight. If you wish to carry a DSLR body and LIGHT lens, then purchase the SpiderPro Plate alone - this plate is compatible with your Black Widow Holster. Please email direct for any other questions, etc. Thank you Spider Team

Q: 9. can connected with video switcher and used same video wireless ?

A: Hi,I'm not sure I understand the question, but the CONNEX Air unit has a single mini-HDMI connector. As long as you have a single video feed to the Air unit, the CONNEX system will be able to support it, even if there is a switcher after the video source or sources.Also, please see a list of supported resolutions in the link below:https://a href= http://connexuav.zendesk.com/hc/en-us/articles/205148815-Supported-Resolutions target= _blank connexuav.zendesk.com/hc/en-us/articles/205148815-Supported-Resolutions/aRegards,Shahar KerenCustomer Support ManagerAMIMON

Q: 10. I have a MacBook Pro (Retina, Mid 2012) with thunderbolt and usb3. Is this product fully functional with a thunderbolt to express card adapter?

A: JMR makes a PCIe to Thunderbolt adapter that will allow you to connect this device to your computer. However its full functionality will depend on the specs of your computer more so than the connection. MacBook Pros tend to be powerful machines, even when they are a few years old, so I do not think there will be any issues.