The black EOTech EXPS3 Holographic Sight Black Ring Center Dot Reticleis built to perform under extreme conditions while enabling rapid both-eyes-open sighting at close and medium range and conserving valuable rail space. To get you precisely on-target, impact point correction is made at 1/2 MOA per click with a total windage and elevation adjustment range of ±40 MOA to compensate for most terrain and conditions. Measuring just 3.8" and weighing a mere 11.2 oz, the EXPS3 was designed for use on the M4 platform but will perform on an array of bolt-action rifles and launchers. It has an integrated quick release Picatinny/Weaver Mount for fast and easy removal and reinstallation without having to re-zero, is submersible to 33', and is internally fog resistant. The sight runs on a single included CR123 battery with a continuous runtime of about 600 hours on a medium setting, with 30 selectable intensity levels: 20 for use from dawn to dusk and another 10 for use with night vision devices, when operating in the dark.

68 MOA Ring, 1 MOA Aiming Dot    30 Intensity Levels, NVD Compatible    1x Magnification; Parallax-Free    Antireflection Coated Optics    1/2 MOA/Click Impact Point Correction    +/-40 MOA Windage/Elevation Adjustment    Fog Resistant, Submersible to 33'    Quick Release Picatinny/Weaver Mount    Runs on One CR123 Battery    Made in the USA

• Generous 1.2 x 0.85" sight window
• 1x magnification is ideal for close quarter use or when clearing rooms
• Unlimited eye relief when using both-eyes-open shooting techniques allows for complete situational awareness
• Antireflective coated optics ensure bright and clear views through the sight window
• 1/8" shatter-resistant glass front window, and 3/16" shatter-resistant laminate rear window will hold up to recoil and extreme use conditions
• 90' field of view at 100 yd

• Ring/Center Dot configuration
• 68 MOA ring with vertical and horizontal stadia, and a 1 MOA aiming dot
• Red illumination is easy to see in full daylight, low light, or in the dark
• 30 brightness settings: 20 levels for daytime use, 10 levels for use with Gen I/II/III night vision devices
• Easily toggle between regular and night vision levels
• Auto battery check indicator

• Designed for the M4 carbine platform, but can be used with medium caliber machine guns, grenade launchers, bolt-action rifles, crossbows, and less-than-lethal projectile launchers like bean-bag guns
• 1/2 MOA adjustment per click impact point correction
• ±40 MOA windage and elevation adjustments
• 10 MOA per dial rotation of travel
• Recessed windage and elevation dials reduce snag points
• User-facing raised on/off and intensity selection buttons
• 8- or 4-hour selectable auto shut-off
• Digitally regulated output maintains consistent reticle intensity throughout battery charge

• Nonreflective black hard coat finish
• Durable housing with aluminum hood assembly
• Submersible to 33'
• Resistant to internal fogging when moving through extreme conditions and temperatures
• Integrated quick release Picatinny/Weaver Mount with self-adjusting mechanism that compensates for variation in tolerances or out-of-spec rails to keep the sight centered
• Runs on one included CR123 lithium battery
• Made in the USA

Related Questions and Answers

Q: 1. What size is the tripod mount?

A: The tripod mount thread is 3/8" and you could size it down to 1/4-20" if necessary with a reducing bushing.

Q: 2. It's compatible with the Fujifilm X100V lens?

A: No, the 7artisans photoelectric lens focus ring tab is more suitable for interchangeable lens.

Q: 3. Are all the parts made of steel? What is the load capacity?

A: The manufacture does not list the load capacity on the Impact 3" Center Jaw Vise Grip. But it can support most lights under 12 lbs. And it is all steel but the rubber part on the clamp.

Q: 4. Does it fit the MT290XTC3US 290 Xtra Carbon Fiber Tripod? Thank you.

A: No, the Manfrotto Befree Leveling Center Column is not compatible on the MT290XTC3US 290 Xtra Carbon Fiber Tripod.

Q: 5. Does this fit the manfrotto mt190x3? it comes with the befree fluid head but wasnt sure if it was compatable only with tripods labeled with befree on the side vs the 190x light

A: Unfortunately they do not make a leveling column for the MT190X3. I would suggest this Oben leveling base instead: B&H # OBLH2510 MFR # LH-2510 https://bhpho.to/3sVwMEP

Q: 6. Is this compatible with Benro GoPlus travel FGP18A tripod?

A: Unfortunately no. B&H # (this column) BEGSR160, works with the Benro Series 1 Tripods. See the link below. a href= https://www.bhphotovideo.com/c/product/1343719-REG/benro_fpa19ab0_proangel_aluminium_series_1.html target= _blank https://www.bhphotovideo.com/c/product/1343719-REG/benro_fpa19ab0_proangel_aluminium_series_1.html/a

Q: 7. Does the adhesive remove any paint or cause blemishes after you remove it?

A: The adhesive on the 7artisans Photoelectric Lens Focus Ring Tab (Black) is non-destructive and removable.

Q: 8. Can I use this with the Impact Grip Head 2.5 (KCP-200). Does the stud is long enough?

A: Yes. There will be enough spigot to make a decent grip to a grip head

Q: 9. Has anyone tried using this with a GoPro?

A: For that to work you would need one of these as well. a href= http://www.bhphotovideo.com/bnh/controller/home?O=&sku=1046652&gclid=CIiaxf3lv8gCFZI7gQod_ooDlQ&is=REG&m=Y&A=details&Q= target= _blank http://www.bhphotovideo.com/bnh/controller/home?O=&sku=1046652&gclid=CIiaxf3lv8gCFZI7gQod_ooDlQ&is=REG&m=Y&A=details&Q=/a

Q: 10. Will this fit TTArtisan's 25mm f/2 lens?

A: Yes, the 7artisans Photoelectric Lens Focus Ring Tab (Black) can fit onto the TT Artisan 25mm f/2.