The black EOTech EXPS3 Holographic Sight Black Ring Dot Reticleis built to perform under extreme conditions while enabling rapid both-eyes-open sighting at close and medium range and conserving valuable rail space. To get you precisely on-target, impact point correction is made at 1/2 MOA per click with a total windage and elevation adjustment range of ±40 MOA to compensate for most terrain and conditions. Measuring just 3.8" and weighing a mere 11.2 oz, the EXPS3 was designed for use on the M4 platform but will perform on an array of bolt-action rifles and launchers. It has an integrated quick release Picatinny/Weaver Mount for fast and easy removal and reinstallation without having to re-zero, is submersible to 33', and is internally fog resistant. The sight runs on a single included CR123 battery with a continuous runtime of about 600 hours on a medium setting, with 30 selectable intensity levels: 20 for use from dawn to dusk and another 10 for use with night vision devices, when operating in the dark.

68 MOA Ring, Two 1 MOA Aiming Dots    30 Intensity Levels, NVD Compatible    1x Magnification; Parallax-Free    Antireflection Coated Optics    1/2 MOA/Click Impact Point Correction    +/-40 MOA Windage/Elevation Adjustment    Fog Resistant, Submersible to 33'    Quick Release Picatinny/Weaver Mount    Runs on One CR123 Battery    Made in the USA

• Generous 1.2 x 0.85" sight window
• 1x magnification is ideal for close quarter use or when clearing rooms
• Unlimited eye relief when using both-eyes-open shooting techniques allows for complete situational awareness
• Antireflective coated optics ensure bright and clear views through the sight window
• 1/8" shatter-resistant glass front window, and 3/16" shatter-resistant laminate rear window will hold up to recoil and extreme use conditions
• 90' field of view at 100 yd

• Ring/Double Dot configuration
• 68 MOA ring with vertical and horizontal stadia, and two 1 MOA aiming dots
• Red illumination is easy to see in full daylight, low light, or in the dark
• 30 brightness settings: 20 levels for daytime use, 10 levels for use with Gen I/II/III night vision devices
• Easily toggle between regular and night vision levels
• Auto battery check indicator

• Designed for the M4 carbine platform, but can be used with medium caliber machine guns, grenade launchers, bolt-action rifles, crossbows, and less-than-lethal projectile launchers like bean-bag guns
• 1/2 MOA adjustment per click impact point correction
• ±40 MOA windage and elevation adjustments
• 10 MOA per dial rotation of travel
• Recessed windage and elevation dials reduce snag points
• User-facing raised on/off and intensity selection buttons
• 8- or 4-hour selectable auto shut-off
• Digitally regulated output maintains consistent reticle intensity throughout battery charge

• Nonreflective black hard coat finish
• Durable housing with aluminum hood assembly
• Submersible to 33'
• Resistant to internal fogging when moving through extreme conditions and temperatures
• Integrated quick release Picatinny/Weaver Mount with self-adjusting mechanism that compensates for variation in tolerances or out-of-spec rails to keep the sight centered
• Runs on one included CR123 lithium battery
• Made in the USA

Related Questions and Answers

Q: 1. Can this unit be used on a camera without a hot shoe, but with a sync cord plug?

A: The Dot Line DL-RLF90 LED Continuous and Flash Ring Light can be used without connecting to a hot shoe but only in continuous mode. There is no external PC sync on the ring light.

Q: 2. Getting mixed messages from reading the reviews. So, is this an original OEM Leica lens thread protection ring or not?

A: Yes, the Leica Lens Ring for Q/Q-P/Q2 (Black) is manufactured by Leica.

Q: 3. Could this support a heavier camera say 10+ lbs?

A: Yes, can attach the P&C Handgrip to larger cameras. Do be careful though because attachments that connect with one mounting point are less secure. This could cause issues depending on how large the camera is.

Q: 4. What size phone can fit the phone holder?

A: The smartphone holder included with the purchase of the Godox LR150 Bi-Color LED Ring Light (18", Black) accommodates smartphones between 2.76" to 5.32" (70mm to 135mm) wide.

Q: 5. Does it fit any Leica lenses like 50 summicron, or 90 elmarit?

A: Yes, it is compatible with both lenses.

Q: 6. will can use with Zacuto Blackmagic Pocket Camera Z-Finder 2x ?

A: You won't be able to attach it to the Z-Finder per se but you can attach it to the camera (where the tripod gets connected to).

Q: 7. How many are included in the package?

A: It only comes with one.

Q: 8. Will this attach to a camera tripod?

A: Yes, with a 5/8" to 1/4-20" adapter. click the link below to view; https://bhpho.to/3lM0gl8

Q: 9. Does the adhesive remove any paint or cause blemishes after you remove it?

A: The adhesive on the 7artisans Photoelectric Lens Focus Ring Tab (Black) is non-destructive and removable.

Q: 10. will can use Zacuto Blackmagic Pocket Camera Z-Finder 2x ?

A: I'm not familiar with that specific camera. That being said, this has a 1/4 -20 tripod screw which is virtually universally acceptable. So, if you camera fits other tripod mounts,it should fit on this also.