Palmer Monicon L Passive Monitor Controller

Product Code: eq177787
Availability: In Stock

$606.00 $915.06

Qty

8 reviews Write a review

Description
Reviews (8)

Palmer's Monicon L Passive Monitor Controller is an analog device that connects computers or audio interfaces, via stereo aux inputs (L/R RCA sockets, and a 3.5mm TRS jack for unbalanced inputs) or stereo inputs with combo XLR-1/4" balanced sockets, to two sets of self-powered monitors. The power supply is used for the LEDs, which indicate input and output selection, and for the headphone amplifier. The layout makes switching and level changes easy, with its push-button switches and large volume and headphone knobs.

You can A/B outputs one and two, or listen to both simultaneously using output selector switches. The mono XLR output is always active and enables you to connect an additional speaker or sum a stereo output. PFL mode facilitates stereo and main aux input monitoring regardless of onboard level settings.

Analog Device for Volume Control Passive Circuitry Dual Stereo XLR Outputs Combo XLR-1/4" Balanced Inputs RCA and TRS Jacks for Unbalanced Inputs Integrated Headphone Amp Output Selector Switches PFL Monitoring

Parameters
Circuitry	Passive
Inputs	Balanced 2 x combo XLR-1/4" Aux (unbalanced): 1 x TRS 3.5 mm 2 x mono RCA
Maximum Input Level	+20 dBu
Input Impedance	5 kOhms unbalanced 10 kOhms balanced
Output Connectors	5 x XLR: (4 x balanced; 1 x unbalanced)
Maximum Output Level	+20 dB
Output Impedance	600 Ohms
Frequency Response	10 Hz to 40 kHz
THD	0.001%
Output Attenuation	Attenuator: 85 dB Attenuator + mute: 112 dB
Controls	2 x output selection Input selection (stereo or aux) PFL (stereo and aux) Mute Stereo/mono Headphones level Auxiliary volume Main volume
Cabinet Construction	Sheet steel Wood
Cabinet Finish	Powder-coated
Dimensions	8.6 x 3.0 x 3.9" / 21.8 x 7.7 x 10.0 cm
Weight	2.5 lb / 1.1 kg
Packaging Info
Package Weight	3.2 lb
Box Dimensions (LxWxH)	11.3 x 5 x 3.9"

Related Questions and Answers

Q: 1. Will this work with the Ronin MX?

A: The Ronin 2 thumb controller is not designed to be used with any other Ronin series product.

Q: 2. Can I get a cable extension for use on a Steadicam? What LEMO connector is it?

A: Unfortunately there is not dedicated extension cable for the DJI Ronin 2 Thumb Controller. DJI suggests using a USB-A extension cable to extend the included control cable's reach. A USB-A male to female cable that supports data transmission will suffice, such as the Pearstone USB 3.0 Type A Male to Type A Female Extension Cable - 6' (BH #PEUSB3AA6).

Q: 3. Is this identical with with Kopul CMX-2 Two-Channel Passive Camcorder XLR Adapter? https://a href= http://www.bhphotovideo.com/c/product/1116259-REG/kopul_cmx_2_2_channel_pasive_camcorder.html target= _blank www.bhphotovideo.com/c/product/1116259-REG/kopul_cmx_2_2_channel_pasive_camcorder.html/a

A: The Saramonic SR-AX101 is identical in features to the Kopul CMX-2 XLR adapter.

Q: 4. Is this compatible with ronin s??

A: This is only listed as being compatible with the Ronin 2.

Q: 5. Will this work with Deity D3 Mic?

A: I'm trying to connect the Deity D3 Mic to the SR-AX100 to the Canon 80D. But doesn't work. What am I doing wrong.

Q: 6. Do these work in interiors and exterior?

A: The Deity Microphones BF1 Passive Omnidirectional Butterfly Antenna (Pair, 470 MHz to 1 GHz) can be used indoor and outdoors. It is IP65 rated for dust and water resistance.

Q: 7. Do I need to purchase anything else beside the antena?

A: This should work with any receiver but this antenna needs DC power. Many receivers can supply DC at the antenna port, but if yours does not you'd need to consider how you are going to supply power to it. You can use a DC power supply if you are close enough to an AC outlet. If not, you'd need to supply power via a DC inserter between the receiver antenna jack and the cable to the antenna. Lectrosonics makes this. Part number is BIAST and also needs a CH12 power supply.

Q: 8. Where does this mount?

A: Most people mount it to the right or left sides of the R2's ring mount.

Q: 9. Is there a watchman dongle available ? Just like with the trackers?

A: Watchman dongles are not sold as accessories.

Q: 10. Will this work on my HPX250?

A: Yes, this controller will work with the HPX-250.

Richard	16/09/2024
[Passive] I recently upgraded my studio with a 16-in/16/out audio interface, but with no headphone jack and no monitor control. This little box solved my monitor control issue perfectly. Extremely transparent to my ears, very solid build, all the controls have a nice feel to them, and great looks. The wood sides are more of a walnut color than what's shown on the website, which was perfect. Highly recommended. 5

Jean	03/09/2024
[Powder-coated] I compared the listening with attenuator ATTY of A designs. Monicon seems more open and transparent. The case is also solid and of an interesting design. Very satisfied with this product. 5

Amir	14/08/2024
[+20 dB] Great solid unit for the money! 5

Jim	03/08/2024
[3.2 lb] As a professional on-location recording engineer, I needed a simple, yet accurate monitor controller between the digital recorder, and the active monitors. Not only did I find this device was well built in Germany, but has high quality components which provides excellent channel tracking which is extremely important. This little device does exactly what its suppose to do. I couldn't be happier with this device, or ask for anything more. You really get a lot of quality for the modest cost of this unit. I'm extremely pleased! 5

Carl	09/07/2024
[Powder-coated] I was looking for a monitor controller with plenty of i/o and handy features at a decent price and this definitely fit the bill. Phase meter and integrated talk back mic are nice touches. There are a couple of different options for configuring the selection of speakers which are very useful in quickly swapping between different set ups. 5

Stacy	12/06/2024
[10 Hz to 40 kHz] Needed a monitor station when my well known big knob controller finally became unusable. The Palmer Monicon XL is a definite improvement, not only in function but in audio performance. Everything sounds better! Simple user interface has a lot of functionality with the setup options. 5

MIDI	17/04/2024
[11.3 x 5 x 3.9"] This works exactly how it should. The knob has a very nice feel and the wood grain sides looks great. Overall it's a solid product! 5

Nathan	09/04/2024
[11.3 x 5 x 3.9"] The build quality of this monitor controller is really what impressed me the most. The actual unit itself is pretty simple; it's only a knob and two buttons, and it's passive. From what I can tell after some simple A/B testing, it's completely transparent. That being said, I would not trust the stereo balance at the extreme low positions (-36 or -85). This isn't a fault of the unit, it's just the nature of a potentiometer. To have 100% perfect stereo balance throughout the entire range of the knob's travel, you would need to spend over $1000, so this will provide excellent results for all but the most discerning studios. Let's be real here, you're not buying this if you're in a million dollar studio. If you're like me and thinking about buying a cheaper controller (I'm willing to bet I know which M brand and B brand you're looking at! ), spend the extra money and get a product that's made with quality materials and actually has detailed specifications provided from the manufacturer. You'll be glad you did. 5