Cisco Sm-X-1T3/E3 Module For Isr Routers

Cisco Sm-x-1t3/e3 Module For Isr Routers

Product Code: eq177792
Availability: In Stock

$33,873.54 $46,406.75

Qty

12 reviews Write a review

Description
Reviews (12)

Enable your Cisco integrated service router to quickly switch between T3 and E3 WAN modes with the Cisco SM-X-1T3/E3 Module for ISR Routersfrom Cisco. Designed for use with Cisco 2900, 3900, and 4000 Series integrated service routers, the SM-X-1T3/E3 service module lets you switch between T3 and E3 applications by executing a single Cisco IOS Software command.

This one-port service module comes equipped with two 75 Ohm BNC coaxial connectors, one for transmitting and another for receiving. Full-duplex T3 and E3 communication is supported. An integrated line interface unit (LIU) allows T3 or E3 lines to be directly terminated on your compatible Cisco router.

For Select Cisco ISRs 1-Port T3/E3 Service Module 2 x 75 Ohm BNC Coaxial Connectors Full-Duplex T3 & E3 Communication Integrated Line Interface Unit

Parameters
Interface	DSX-3 Level 2 x Female 75 Ohm BNC Coaxial Connectors (RX and TX)
Connectivity	Full-Duplex at DS-3 Rate (44.736 MHz) Full-Duplex at E3 Rate (34.368 MHz)
Scrambling	Scrambling and Subrate Support of Major DSU Vendors
Cable Length	Up to 450' / 137.2 m (734A or Equivalent Coaxial Cable) Up to 225' / 68.6 m (728A or Equivalent Coaxial Cable)
Framing	C-Bit or M23 Framing (T3) Bypass and G.751 Framing (E3) Software Selectable
Line Coding	T3: Binary Three-Zero Substitution (B3ZS) E3: High-Density Bipolar with Three Zeros (HDB3)
Channel Support	DS-3 FEAC
CRC	16- and 32-Bit (16-Bit Default)
Detection	DS-3 Alarm and Event Detection (Once-per-Second Polling)
LED Indicators	CD LP AIS FERF EN Alarm
Serial Encapsulation	HDLC PPP Frame Relay
Compliance and Certification	DS-3 Physical Layer: ANSI T1.102 and T1.107 E3 Physical Layer: TBR24, ITU-T G.703 and G.823, ACA TS016
Standards	T3/E3 MIB (RFC 1407)
Safety Approvals	United States (UL1950 3rd Edition/CSA C22.2, No.950) Canada (C1950) UK (BS6301, EN60950, EN41003) Germany (TUV GS) France (EN60950, EN41003, NFC98020) AS/NZS 3260 (Australia/New Zealand) EN60950/EN41003 (Europe) IEC 950 (national deviations)
EMC Compliance	47 CFR 15: 2001 Class A (FCC) ICES003 Class A EN55022 Class A: 1998 EN300386: 2001 EN55024:1998, EN50082-1:1997 and EN61000-6-2: 1999 including: ESD (EN61000-4-2) Radiated Immunity (EN61000-4-3) Burst Transients (EN61000-4-4) Surges (N61000-4-5) Injected RF (EN61000-4-6) Dips + Sags (EN61000-4-11) EN61000-3-2: 1995 EN61000-3-3: 1995 AS/NZS 3548 Class A VCCI V-3/2000.04 Class A
Operating Temperature	32-104°F / 0-40°C
Storage Temperature	-4-149°F / -20-65°C
Relative Humidity	10-90% (Non-Condensing)
Dimensions	1.55 x 7.10 x 7.2" / 3.9 x 18.0 x 18.3 cm Single-Wide, No Slot Restrictions
Packaging Info
Package Weight	2.95 lb
Box Dimensions (LxWxH)	16.4 x 16.1 x 4.4"

The increased demand for bandwidth over the WAN and more attractive pricing of T3/E3 links by service providers has led to steady growth in T3/E3 deployments around the world. The T3/E3 module eliminates the need for an external data service unit (DSU), reduces provisioning costs, and provides highly manageable T3/E3 line termination. The module provides an integrated line interface unit (LIU) DSU that allows T3 or E3 lines to be directly terminated on a Cisco router, eliminating the need for external DSU equipment, simplifying the T3/E3 line management, reducing provisioning cost, and freeing valuable rack space.

The T3/E3 module supports the proprietary subrate and scrambling features of T3 DSU vendors such as Digital Link, Larscom, and ADC Kentrox. Subrate support in the module helps to maximize the utility of these products in service provider environments. By simultaneously supporting interoperability with a wide range of third-party DSU vendors, this module offers the flexibility to support installed equipment without locking customers into a proprietary solution.

The Cisco T3/E3 Service Module provides direct connectivity to a T3 line for full-duplex communications at the T3 rate of 44.736 MHz and full-duplex E3 communications at 34.368 MHz. Each T3 or E3 port consists of a pair of 75 Ohm BNC coaxial connectors (type RG-59), one for transmitting data and one for receiving data, along with six LED indicators for line status. The T3/E3 module is supported in most Cisco IOS Software feature sets, and there are no additional memory requirements.

One-port T3 with DSU or E3 with DSU module

T3/E3-specific features for monitoring, bit error rate tester (BERT), MIBs, alarms, and more

Ability to independently or simultaneously enable scrambling and subrate in each DSU mode

Support for the following DSU vendors' algorithms: Digital Link, Kentrox, Larscom, Verilink, and Adtran

Support for the serial encapsulation protocols: Frame Relay, Point-to-Point Protocol (PPP), and High-Level Data Link Control (HDLC)

16-bit cyclic redundancy check (CRC)

Line and payload loopback capabilities

DS-3 remote-line loopback through Far-End Alarm and Control (FEAC) codes per American National

Standards Institute (ANSI) T1.107a

Response to embedded loopback commands

Insertion of loopback commands into transmitted signal

Programmable pseudorandom pattern up to 32 bits long, including 223, 220, 215, 1s, 0s, and alt-0-1

32-bit error count and bit-count registers

Alarm detection-Alarm indication signal (AIS), remote alarm, far-end block error (FEBE), and out of frame (OOF)

Onboard processor for Maintenance Data Link (MDL)

The Cisco T3/E3 Service Module provides the performance requirements to deploy advanced voice, video, and

data applications over the WAN and supports key Cisco IOS Software features and services such as quality of service (QoS), Network-Based Application Recognition (NBAR), IP Security (IPsec), Firewall, intrusion detection system (IDS), Network Address Translation (NAT), and NetFlow.

Related Questions and Answers

Q: 1. Will this adapter works connecting the TC 80N3 to Fuji XT-30 camera?

A: Unfortunately the adapter will not work but you can use this Vello Shutterboss timer remote instead: https://bhpho.to/2PxHMsy

Q: 2. how do you remove cable from the camera?

A: Simply remove the cable by pulling it, much like removing a plug from a socket.

Q: 3. will this cable (Canon RA-E3) work with my R3?

A: The Canon RA-E3 is not for the EOS R3 camera. The Canon EOS R3 already has the E3-type socket, so you don't need this adapter for the camera.

Q: 4. Will it work with only 430EX II flashes?

A: The ST-E3-RT is not compatible with a 430 EXII.

Q: 5. Do I Need this adapter to used on my Cannon EOS R?

A: only if you have a 3-pin remote

Q: 6. Will this work with a pocket wizard?

A: Technically, this cable could work with a Pocket Wizard if you had a cable with a 3 pin remote connection for Canon which terminates into a miniphone connector.

Q: 7. Does this work with Sony?

A: The Canon Speedlite Transmitter ST-E3-RT (Ver. 2) BH #CASTE3RTV2 is not compatible with Sony.

Q: 8. Will this item support shooting in (camera) Manual mode when combined with a EOS 1 DX Mark III and a Speedlite EL-1 or am I limited to Program mode?

A: ***********Please send this to SLR Q&A **************

Q: 9. Will this work with Canon 90D?

A: yes it does , to trigger the camera

Q: 10. Is the ST-E3-RT compatible with both the EL-1 and the 600EXll-RT speedlights?

A: The Canon Speedlite Transmitter ST-E3-RT (Ver. 2) will work with both the EL-1 and the 600EX II-RT.

QDI ADMIN	17/08/2024
[DS-3 FEAC] Plugged it in and it's working great. B & H had a very good price on these and they were shipped and received in a timely manner. 5

Amanda	12/08/2024
[DS-3 FEAC] Authentic Cisco product. Exactly what I needed. Thanks! 5

Robert	04/08/2024
[2.95 lb] I used the magnifier to check my sensor and was able to see exactly where the dirt was located and clean it completely. Great to be able to see where the problem is and also the cleaned area after. A must have item for all photographers. 5

Walker	26/07/2024
[DS-3 FEAC] I absolutely love Meraki Products and that doesn't change with the Meraki Go line of products. The Meraki Go Lineup combines the affordability of consumer products and the experince of Meraki's enterprise Hardware. Setup was painless with the guidance of the Meraki Go app. If you have used any of the Meraki enterprise products, Meraki Go is very much simiar with a smaller and more digestable feature set making it very friendly for even the least tech savvy. 5

Glen	16/07/2024
[2.95 lb] The Cisco replaced a 12-year-old Logitech. Cisco works great and comes with USB 2.0 and USB-C cables. Image is sharp and clear. Works well in different lighting too. Mic works well. The design is simple and unobtrusive. 5

William	12/07/2024
[DS-3 FEAC] I’ve gone through a number of headsets for my desk work phone. I’ve spent from $19 all the way to $47. The headphones just didn’t work well, the noise cancellation and mic fidelity were very dad. Welp you get what you pay for sometimes. These headphones exceeded my expectations. Remember though this model is the for phone jack, the RJ9. I got it for around $132. Totally worth every penny. Not only is the sounds quality better on my ears, the feel and attention to Detail is great. I have a Cisco phone at work and these Cisco headphones are the ones you want. Don’t make a mistake and get cheap headsets for work. You will be using it all the time. Invest in a good headset. Just get this headset already. 5

Avery	27/06/2024
[DS-3 FEAC] We have used these headsets across out entire office over other offerings from Plantronics. They have great sound and mic quality, longlasting battery and good comfort. Will continue to buy until they upgrade to a new version! 5

Josh L.	09/05/2024
[2.95 lb] I saw that many reviewers didn't like this for M43 cameras, but I have to say I haven't had any issues using it to inspect my G9 or BMPCC 4K. It's done wonders for my process when cleaning my sensors, and gives me the confidence to know I have done a through job. Highly recommended. 5

Christopher	06/05/2024
[2.95 lb] Very useful tool to have. Nice magnification. Led lights are bright. Nice little hard shell canvas zipper storage case. 5