The Mini-DisplayPort to DVI Adapter from Prudent Way is equipped with one male Mini-DisplayPort input and one female DVI output, allowing you to connect any device with a Mini-DisplayPort output to any display with a DVI input. This adapter is compliant with DPCD (DisplayPort Configuration Data) Revision 1.1 and supports resolutions up to 1920 x 1200 at 60Hz.

Mini-DisplayPort Male Input    DVI Female Output    Nickel Plated    Full 1080p HD Video Support

Related Questions and Answers

Q: 1. How many minutes can this power the Titan X2 at 100%?

A: The battery kit, Rotolight Titan 4-Way V-Lock Regulated Battery Adapter and 155Wh Battery Bundle Can last about 75 minutes on the Rotolight Titan X2 at full power.

Q: 2. Will this work with "Kirk Universal Tall L-Bracket" ? THANKS

A: Yes it is compatible and work with the Kirk QRLB-T Universal Quick Release Tall L-Bracket: https://bhpho.to/2UsRRHH

Q: 3. Hello. Will this work with Gitzo GT2542 tripod, canon R6ii, RF 100-500 and 1.4 extender? Stills and video. Thank you.

A: Yes, the Gitzo 2-Way Fluid Head would work with the Gitzo GT2542 Mountaineer Series 2 Carbon Fiber Tripod for stills, or video. It would also support your payload weights.

Q: 4. Where I can find instruction to dismantle the HD3way tilthead of my A300F Benro tripod and substitute for this one?

A: These instructions apply to most tripods with removeable heads. 1) Ensure there are no set screws locking the current head down to the platform; check underneath and loosen with appropriate hex wrench or flathead. 2) Tighten the panning base on the tripod head and secure the center column to prevent it from twisting. 3) Grab the ballhead and rotate counterclockwise to remove the head from the mounting screw. 4) Ensure both the new head and tripod legs use the same mounting screw size (typical is 3/8"-16). 5) Rotate the new head onto the legs by twisting clockwise. Voila!

Q: 5. Would this support a Nikon D750 with 24-120mm lens?

A: I'm not an expert, but I'm guessing it would. It's very sturdy, and I use mine with a similar sized camera, out in the woods, at all kinds of odd angles. So far the camera has not shifted position once.

Q: 6. What is the height of the HD2A?

A: The height is 4.5".

Q: 7. Can we build RGBEasy on Linux platform?

A: Possibly. Operating System Support:Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows Server 2012, Windows 7 (x86 and x64 operating systems), Windows 8 and Linux support. Please contact Datapath directly for guidance:DATAPATH: Email: sales@datapath.co.uk

Q: 8. What is the difference between Benro HD3A 3-Way and Benro HD2A 3-Way besides the load capacity?

A: Operationally the Benro HD2A and HD3A 3-Way Panheads are the same. The HD2A is slightly lighter weight, 1.7 pounds vs 2. Other than the weight, load capacity and price, there are no major differences.

Q: 9. Does this tripod have rubber feet? I'm trying to find something that would not slide on a smooth surface.

A: Yes. The feet on the EX-Mini (at the time that I bought mine) are rubberized. There may be surfaces on which they would still slide, but I tried it on wood, plastic and glass without slipping.Hope this helps.

Q: 10. Is it compatible with Peak Design plate?

A: It is but if you get this peak design plate it would work much more securely. https://www.bhphotovideo.com/c/product/1372682-REG/peak_design_pl_d_2_dual_plate.html?sts=pi&pim=Y