Split your 4K input to two 4K TVs or monitors with the Gefen HDMI Splitter with 4K UHD (1 x 2). In addition to 4k DCI (4096 x 2160) video resolution, it also supports Deep Color, 3D video, and high-resolution audio formats such as Dolby TrueHD, DTS-HD Master Audio, and more. This splitter features locking HDMI ports and power supply for secure connectivity. It also supports up to 10 levels of cascading, allowing you to split your signal to over 1000 4K TVs for digital signage or showroom applications.

Supports up to 4K 4096 x 2160 & 3D Video    Dolby TrueHD, DTS-HD Master Audio    EDID Management for Rapid Integration    Cascade 10 Levels Deep in up to 4K    Locking Power Supply    Supports Locking HDMI Cables    LED Power Indicator    Surface-Mountable

Simultaneously displays an Ultra HD source on up to two Ultra HD displays

Specifically designed to support 10 layers of splitting/cascading in large video distribution and signage applications, supporting over 1000 displays

Supports resolutions up to 4K DCI (4096 x 2160 @ 24 and 30 Hz), 4K Ultra HD (3860 x 2160 @ 60Hz, 4:2:0 color space), 1080p Full HD, and 1920 x 1200 WUXGA

Supports 12-bit Deep Color at 1080p

3DTV pass-through

Lip sync pass-through

FST Technology speeds up HDCP authentication process

EDID Management and Audio Mode selectors for rapid integration of source and displays

Supports LPCM 7.1, Dolby TrueHD, Dolby Digital Plus, and DTS-HD Master Audio

Supports the use of DVI sources and DVI displays with optional HDMI-to-DVI adapters

Field-upgradeable firmware using Mini-USB port

Locking power supply

Surface-mountable

Related Questions and Answers

Q: 1. Does this support 10 bit HDMI aka HDMI Deep Color?

A: Yes, this splitter has HDMI 1.4, which supports 10-bit.

Q: 2. How long can I expect this device to last in a setting where it is sending a signal from a laptop to 3 monitors 24/7 (i.e. every day, all day long)? Thanks.

A: Yes, as long as the unit is kept in a cool working environment with temps no higher then 70 degrees, the unit will run all daylong 24/7.

Q: 3. Will this create a new source channel on my TV?

A: Apologies, it does not create a "new" source, but rather splits one HDMI input into four HDMI outputs.

Q: 4. do they make an adapter that will power this from a Canon or Nikon battery?

A: Canon and Nikon batteries are 7 dvc volts and this runs on 5 dcv. While it would be possible to build such a power adapter at this time we do not know such a device. If you need a HDMI splitter that cannot be powered, you might success with this splitter. Keep in mind that you need high quality short cables to have success with it. By judging by the reviews, your mileage may vary. Please email us if you have further questions. E-Mail: provideo@a href= http://bhphotovideo.com target= _blank bhphotovideo.com./a

Q: 5. If I have a 4k output device and use the splitter with a 4k tv and a 1080p tv, will each tv get their respective resolution signal? I've seen some other splitters that scale 4k signal to 1080p to both devices because of the lower resolution on one tv.

A: No it can not. It does not have the ability to scale the output to match the display. It will output the lowest common denominator to all displays. For example, in your scenario all displays will receive 1080p. Consider the Kopul HDMI 2.0 1 x 4 Splitter BH #KOHDMISP1420 • MFR #HDMISP14H20 if you need to mix different display resolutions.

Q: 6. Will this work with only 3 outputs connected?

A: Yes. Or 2. Or 1. Or all 4.

Q: 7. Does this item create a new source on your TV?

A: The Kanex Pro 1x2 HDMI Splitter does not create a new source but rather splits one HDMI input into two HDMI outputs.

Q: 8. will it support 50+ ' cable length?

A: This will not support cables that are longer than 50 feet. However HDMI cables in general start to lose quality once you go past 35 feet. For runs of 50 feet and longer we suggest HDMI extenders from companies like KanexPro and Avenview. They will send a signal as far as 300 feet over a Cat6 cable.

Q: 9. Is there a mounting screw on the bottom?

A: The KanexPro 1x2 HDMI Splitter does not have a mounting thread, but simply a screw that holds the housing together.

Q: 10. Does this support Dolby Atmos protocols?

A: This lists support for DOLBY/DTS 5.1.