This viewfinder bracket kit is designed for use with any viewfinder with a 1/4" thread on the bottom side. This bracket uses a NATO rail system to connect the camera to the viewfinder and prevents the viewfinder from "twisting", which can result in a crooked horizon of the image.

• This viewfinder bracket kit is designed for use with any viewfinder with a 1/4" thread on the bottom side
• This bracket uses a NATO rail system to connect the camera to the viewfinder and prevents the viewfinder from "twisting", which can result in a crooked horizon of the image

Related Questions and Answers

Q: 1. What holds your square or round track in place on the bracket?

A: The angle notch holds the track securely with no need for clamping.

Q: 2. Will this work with Fujifilm X-H2? Thank you.

A: Yes, this will fit on the Fujifilm X-H2, however. Some of the side ports will be blocked.

Q: 3. Is there any recommended distance between the universal stand brackets when mounted on slider stands ?

A: There is no official recommended distance, but do not allow the tracks to bow at all. Depending on the length of the run, having a stand on each of the track is fine. Matthews products are very strong.

Q: 4. Can the vertical plate be locked up high enough to center a battery gripped camera over a tripod head clamp in portrait mode?

A: The Arca-Swiss L-Bracket MonoballFix Universal is a very good L plate and universal but it might not work with a grip in vertical position. It will depend on the camera and grip size.

Q: 5. Will this fit a Nikon d7100

A: The Really Right Stuff MC-LS Universal L-Bracket is designed to fit a wide variety of cameras due it's adjustable baseplate. The Nikon D7100 DSLR Camera (B&H # NID7100) will be supported.

Q: 6. I can mount the bracket from right to left of the camera right.? Since my camera LCD panel swings out to the left.

A: Yes the Fotopro QAL-88 2-in-1 Universal L-Bracket can be placed from left to right or right to left.

Q: 7. Will this fit on Fuji XT2 with or without battery grip?

A: While we cannot test this combination, we see no reason it will not work very well for that camera with or without the grip.

Q: 8. Will this L bracket allow the battery compartment door to open fully on the Nikon Zf camera without any modifications?

A: Yes, the Really Right Stuff MC-LS Universal L-Bracket will allow the battery compartment door to open fully on the Nikon Zf Mirrorless Camera without any modifications.

Q: 9. I intend to use this product with my RRS BH-55 Ball Head with Lever-Release Clamp. Are these two compatible with each other? As opposed to the screw knob model, the clamp model is not adjustable. I am worried that the clamp will not close all the way if it’s too tight or it may be a loose fit. Thanks in advance.

A: Unfortunately, we cannot confirm if the Kirk QRLB-T Universal Quick Release Tall L-Bracket would be compatible for use with the Really Right Stuff BH-55 Ball Head with Full-Size Lever-Release Clamp. According to Really Right Stuff's website, only Really Right Stuff and Wimberley plates and rails are guaranteed to work with Really Right Stuff lever-release clamps. Kirk Arca-type plates would be compatible for use with the Really Right Stuff screw-type clamps, but they do not indicate compatibility with the lever-type clamps.

Q: 10. What is the weight capacity?

A: Unfortunately Arca-Swiss L-Bracket MonoballFix Universal does not list a load capacity but it is very strong. It can hold the weight of any digital camera in the style of the Canon 5d Mark IV and the Nikon D850.