The WL436 Series Long-Range White Light Illuminator from Iluminar is a visible light illuminator for surveillance cameras. This illuminator features high-power SMT-enabled (Surface Mount Technology) LEDs with current-limited integral control circuitry. It provides illumination to a distance of 110' at an angle of 100° x 50°. It also has a built-in photocell and comes with a wall mounting bracket. The IP67-rated and vandal-resistant illuminator can be used outdoors. The hardened housing provides protection from harsh weather conditions and rapid temperature variations ranging from -58 to 140˚F (-50 to 60˚C).

Long range white light illuminator with SMT LED technology

Provides visible light for surveillance cameras

Illumination range up to 110' (33m) at an angle up to 100° x 50°

258' (79m) horizontal field of view

Low power consumption of 36W

IP67 weatherproof rating

Built-in photocell with IR on/off

Telemetry input for remote switching

High PoE

Related Questions and Answers

Q: 1. I am considering this to work with the Olympus 60mm f2.8 macro micro 4/3 mount lens on my Panasonic GH3.I have two questions the lens is a 46mm dia filter size. The product says it works on 49mm and up using ring adapters that are included. my question is if I buy a 46-49mm step up ring will this then work for this lens? Or does it mount to the body of the lens not the filter thread?Also will this flash work with a panasonic GH3?

A: Yes, you would need to use a step-up ring, such as the Sensei 46-49mm Step-Up Ring, B&H # SESUR4649, to use the Bolt VM-110 LED Macro Ring Light on the Olympus M.ZUIKO DIGITAL ED 60mm f/2.8 Macro Lens. The flash attaches to the filter threads on the front of the lens. The Bolt VM-110 LED Macro Ring Light would be compatible with both the Panasonic Lumix DMC-GH3 and DMC-GH4 Digital Cameras.

Q: 2. Will this ring light work on a Pentax K3 or K-1 ?

A: I have both cameras, and this light works on both. The lens is actually more important than the camera body. I own lenses that are too small and too large.

Q: 3. Does it work with Sony Alpha 99?

A: works with all reflex , brings many adapters ring in the box

Q: 4. I am using a Fuji hs30exr camera with hotshoe flash mount, will this work with that camera model?

A: it will work but not with TTL metering

Q: 5. Will this work on the Sony Nex 5 camera, since it don't have hot shoe to mount the control unit?Thank.

A: The VM110 Ring Light will work with almost any camera. Just set the unit for continuous illumination, position your lens in the middle of the Ring Light opening, and shoot in auto-exposure mode. The hot shoe mount is for mechanical support of the power pack only, and the lens mounts provided cover most DSLR lens threads, but are not necessary if you shoot through the Ring Light. You can also tilt the camera slightly and shoot off-axis to reduce the flat effect of ring lighting. I have used the VM110 successfully with a Canon point and shoot camera and an iPhone 5s.

Q: 6. compatible with sony a6000?

A: It is compatible with the camera body, as Sony uses TTL with the Hot Shoe. The problem is with attaching the adaptor rings to the lens. The standard lens, Sony E-16-50 mm, only has a filter thread of 40.5mm and will not work. The accessory lens Sony E-55-210mm however has a filter thread of 49mm and work nicely. Bottom line is the filter thread size. The VM-110 LED Macro Ring Light supports 8 thread sizes. Hope this helps.

Q: 7. Could this be used with a Lensbaby Scout fisheye? Or a Lensbaby Composer?

A: The Lensbaby Scout fisheye does not have any filter threads plus it is too wide. There is nothing to attach the ring flash to and it will vignette on that lens. The Lens baby composer has a filter thread of 37mm so you can with a step up ring use the flash.The step up ring is, http://bhpho.to/1cvm3Ir*note the weight of the ring flash will be on the lens so it will be tough to keep the Lensbaby composer in position.

Q: 8. I assume this ring light would work with my Panasonic FV200?? Either with the regular 58mm filter thread or my 58-62 step-up filter ring that I use frequently?

A: It will not fit on the lens of the Panasonic Lumix FZ200, http://bhpho.to/18UmIPx. The ring flash with the 52mm adapter will not screw on because the lens moves in and out.The lens/camera can get damagedwith the ring flash on the lens when it is zoomed wide and closes.

Q: 9. Which one is better....Bolt VM-110 LED or Bolt VM-160 LED...??Thanks....

A: The Bolt VM-160 will be a more powerful unit, but both are effective ring lights.

Q: 10. Will this unit work with a Panasonic GX7?

A: Please, understand this flash holds itself by an attachment ring connected to the lens as a filter, like UV filter. You just need to check the lens filter diameter and check with the flash diameter. It comes with 8 lens adapter from 49-77 mm.GX7 has interchangeable lenses so you need to check which you want to use.