Iluminar Ir919 Long Range Ir Illuminator 850Nm 120°

Iluminar Ir919 Long Range Ir Illuminator 850nm 120°

Product Code: eq177854
Availability: In Stock

$2,637.00 $3,744.54

Qty

13 reviews Write a review

Description
Reviews (13)

The IR919 Series Long Range IR Illuminator from Iluminar emits infrared illumination, which is invisible to the human eye but can be seen by a night vision camera with its IR cut filter removed. The illuminator has a 120° light distribution angle that provides an HOV of 682’ and a range of 197’.

The IR919 illuminator is designed to provide IR lighting for CCTV systems. With an IP67 rating, the illuminator is weatherproof and can be used outdoors. The hardened housing provides protection from harsh weather conditions and rapid temperature variations (-58 to 140°F). This semi-covert camera is not effected by light pollution and has a longer range (197’) than visible light illuminators due to its higher wavelength.

Parameters
Electronics	High efficiency surface mount high-power LEDs with advanced current limited integral control circuitry
Number of SMT LEDs	32
Front Window	Polycarbonate high transmittance protective IR filter
Construction	Aluminum extrusion
HOV	682' (208 m)
Angle	120°
Range	197' (60 m)
Power Cable	9' (3 m)
Interface Connector	Photocell following contact & remote telemetry input
Pressure Equalization Vent	Prevents thermal expansion & pressure cycling
Photocell	Adjustment via pot
Illumination	Adjustable via pot
Operating Temperature	-58 to 140°F (-50 to 60°C)
Wavelength	850 nm
Electrical	24 VAC
Input Current	2.2 A at 24 VAC
Consumption	52 W
Mount	Black powder-coated stainless steel wall mount. Adjustable via M6 Allen key (included)
Safety	EN60598:2004: Electrical Safety EN60825-1: Laser Eye Safety
IP	IP67, in accordance with EN60529:1992
EMC	EN61000, FCC part 15.107, 15.108 Class B
WEEE	Waste Electrical & Electronic Equipment European directive 202/96/EC
RoHS	Restriction of Hazardous Substances European directive 202/95/EC
Dimensions	8.4 x 4.3 x 3.1" (21 x 11 x 7.8 cm)
Weight	3.9 lb (1.75 kg)
Packaging Info
Box Dimensions (LxWxH)	17 x 7 x 7"

Long range IR illuminator

SMT LED technology

Range of 197'

120° light distribution angle

850nm wavelength

Semi covert illuminator with visible faint red glow

Low power consumption (52W)

Long life

IP67 weatherproof rating

Built-in photocell IR on/off

Telemetry input for remote switching

24 VAC input

Related Questions and Answers

Q: 1. Do you have a estimated date the manufacturer will ship these to you?

A: I apologize, but this type of request cannot be taken care of through this feature of our website. Please contact our Customer Service department by entering Live Chat, emailing directly to cs@a href= http://bhphoto.com, target= _blank bhphoto.com,/a or calling us toll-free at 800.221.5743.

Q: 2. What is it with the US tag in the part number? Is it strictly reserved for US residents? I'm from Canada and would like to buy one of these someday.

A: From Ubiquiti's community website...The reason why there are two versions (other brands other versions as well), because in the US, they do not allow devices which are capable of operating outside the US Regulatory domain by the FCC. In terms of the difference or a super-set, the US Version is basically a World Version restricted to operate within the US Regulatory domain. In terms of a product purchase, if you were purchasing from a US seller, you can only get the US version since they are allowed to sell this version. There are some sellers in the US which do sell the World Version, however they can only ship it to addresses outside of the US. If you were purchasing from outside the US, they will have World Versions (ie. Canada).

Q: 3. Is this the same as the new DJI Lidar Pro?

A: The DJI LiDAR Range Finder for RS 3 Pro increases the ranging points from 43.200 to 76.800 ranging points. The additional ranging points would mean the new Lidar focus Pro will be more accurate. Also, the maximum range has been increased from 46 feet to 65 feet. The Lidar Pro also has support for human and vehicle recognition.

Q: 4. What other equipment do I need to have the camera on a tripod and use the DJI LiDAR Range Finder?

A: The DJI LiDAR Range Finder for RS 3 Pro & RS 4 Pro would require the DJI RS 3 Pro Gimbal Stabilizer Combo, B&H # DJRS3PC, or the DJI RS 4 Pro Gimbal Stabilizer Combo, B&H # DJRS4PC, which comes with a focus motor. The gimbal has a tripod mount that you could use to attach it to a tripod.

Q: 5. Does this include the water bottle holder?

A: According to Vanguard's website, it does come with a water bottle pouch MOLLE attachment. :) See their page here for a full picture of what comes with it: https://bit.ly/3tx2aZU

Q: 6. Is this compatible with the old focus motor included in the rc2?

A: The DJI LiDAR Range Finder for RS 3 Pro is only compatible with the RS 3 Pro and the Ronin 4D. It is not directly compatible with any focus motors.

Q: 7. Has anyone upgraded from the previous non-AC LR units? Are the mounts the same or do you need to redrill the wall?

A: The mount plates are indeed different for the UAP-LR and UAP-AC-LR. Of note, the UAP-AC-LR access points are 25 mm (0.98 inches) smaller than the older UAP-LR access points.

Q: 8. How do I connect my new LiDAR range finder AND my RavenEye transmitter so they work at the same time?

A: The DJI LiDAR rangefinder at this time does not support working with the RavenEye image transmitter.

Q: 9. Is this rated to be outside?

A: No, this is not a outdoor model. BH #UBUAPACMUS is rated to be outside

Q: 10. Can this be used as a standalone device? Perhaps on Arri?

A: Yes, the DJI LiDAR Range Finder for RS 3 Pro can be used with other systems using the new DJI LiDAR Range Finder to Transmitter Cable Hub, BH #DJLIDARRF (https://bhpho.to/46Yle78).

Russell	27/09/2024
[682' (208 m)] It was a piece of cake to attach this to my network. 5

JOHN	19/09/2024
[682' (208 m)] I did quite a bit of research before making this purchase. I used NVGs and other night vision devices when I was in the U.S. Army. The Axton products are military grade and built like a tank with a lifetime warranty to boot. Plus, they provide world-class customer service. I'm very pleased with my purchase and it is worth every penny. 5

Allen	29/07/2024
[32] I bought a similar version from another manufacture to increase the license plate reading capability of my Dahua 5442E-Z4E license plate camera. It was a nice step in the right direction. So, I decided to up the IR some more and see how that would work. While searching the internet I found this model with double the IR power. I bought one and it was an even bigger success. I can now read close to 100% of the plates. So, I have ordered two more to go in my other locations. By the way, this one draws 1 Amp @ 12vdc of power according to the spec sheet that came with the camera. For comparison the other one draw 4/10 of an amp at 12vdc. I am very impressed with this unit. 5

Allen	24/07/2024
[120°] After I bought the first one and seeing how good it was, I ordered 3 more. They are that good for license plate reading. I have to say that I am now in the 99 percentile in reading license plates. I am going to post a picture of a golf cart with a standard California plate. The measured distance is 187 feet. The camera I am using is a Dahua 5442E-Z4E at full extension. I do not recommend using this camera at over 75 feet for license plate gathering. 5

David	23/07/2024
[24 VAC] Added this for my License Plate Camera and it is better than expected with a focused high intensity IR light that reflects off of plates making all plates at night easily readable. See attached photos and note emitters are red and visible just hard to photograph. Also have 2 other Axton IR emitters for the front yard that replaced some cheap IR emitters. The difference in coverage, distance and even spread is night and day. 5

Richard	17/07/2024
[850 nm] Well-built and surprisingly bright for a short range illuminator. My only gripe is the user manual I received, it came in every language except English. I would have preferred more technical information about optimum placement and more intelligible graphs for the various diffusers. Even so, not a big issue. A couple minutes of trial and error and you'll have the neighborhood lit up nicely. Definitely recommend. 5

Al	15/07/2024
[9' (3 m)] Using this to light up the side yard all the way to the back fence, about 90 feet. Just like in Iluminar's youtube videos this thing throws IR light everywhere. I love that a separate camera in a opposite corner that just sees the backyard sees the massive amount of IR light that it puts out. I have this model and the IR148 both are built solid after a year later still waterproof and working fine. 5

Yos	25/06/2024
[24 VAC] I've had a few of these scattered about the property for a couple years now. Throws a lot of IR and have been flawless. Beam pattern, IR power, and photocell sensitivity are adjustable. 5

JOHN	22/06/2024
[32] I did quite a bit of research before making this purchase. I used NVGs and other night vision devices when I was in the U.S. Army. The Axton products are military grade and built like a tank with a lifetime warranty to boot. Plus, they provide world-class customer service. I'm very pleased with my purchase and it is worth every penny. 5

Gary	13/06/2024
[197' (60 m)] This illuminator greatly improved the night visibility of my security camera. I am very pleased with it. Worth the money. 5