Cut the distortion to your wide-angle underwater shots using the Ikelite WD-3 Wide-Angle Dome Port for Underwater Photographyfrom Ikelite. Featuring a conversion factor of 0.75x, the WD-3 corrects for the refractive magnification of a flat port underwater, resulting in images that are crisp and clear edge-to-edge. Constructed of optical-grade acrylic and weighing less than 6 ounces, this port is substantially lighter than a standard wide-angle wet lens for ease of use. The WD-3 can be slipped on and off of your Ikelite housing's standard port during a dive, so there's no limit to the camera's zoom or macro capabilities. The specific angle of coverage depends on your camera model, however approximately 3/4 of the camera's zoom range can be used with the dome in place. The WD-3 wide-angle dome is compatible with any Ikelite housing featuring a 3.0" diameter lens port.

Magnification: 0.75x    Depth Rating: 200"    Made of Optical Grade Acrylic    Can Be Slipped On and Off Underwater    For Ikelite Housings with a 3.0" Port

Related Questions and Answers

Q: 1. Will this fit on mount of the Dual Head for two AD200?. Thanks!!

A: As the Godox Dual Power Flash Bracket for AD200 is compatible with Bowens S-mount light modifiers, yes, the Godox RFT-4 12 Wide Angle Reflector (Bowens Mount, 120 Beam), B&H # GORFT4, may be used with the Godox Dual Power Flash Bracket with two (2) Godox AD200 TTL Pocket Flashes.

Q: 2. Will this hood work on a Lee 105mm polarizing filter mounted on the 100mm lee filter holder and will it swivel for horizontal and vertical shots using that knob I see?

A: The Cavision LH105P Wide Angle Hood B&H # CALH105P has 105mm threads so it should fit on a 105mm filter ring and swivel. However, we do not see the efficacy of swiveling for it is square and would have no effect on its ability to shade nor does it hold filters.

Q: 3. Will this fit my sony 28-135 f4 g oss lens WITH a nisi 95mm vnd filter. I want the hood to fit over the lens and the hole to allow the filter attached to the lense to work.

A: No, the Sony FE PZ 28-135mm offers a 98mm thread size. Please review the hood designed and made for the following lens Sony ALC-SH135 Lens Hood BH #SOALCSH135 • MFR #ALCSH135 https://bhpho.to/3Be3l77

Q: 4. Can this be mounted on a 67mm Red Filter?

A: The BigEye Lens Kit M55 Underwater Wide-Angle Conversion Lens can usually be mounted on a 67mm red filter providing that filter has a standard front 67mm female thread similar to its back 67mm male thread (which is the side that connects to the housing.

Q: 5. If my light is naturally 120 degrees, will this add any benefit?

A: Your fixture already has this reflector built in.

Q: 6. does it come with a sock?

A: Unfortunately, a sock is not included with this reflector.

Q: 7. Will this lens attach to the PT-053? If so, is there an adapter needed for the PT 053?

A: Unfortunately, the Backscatter M52 Wide-Angle Air Lens is only PT-056, PT-058, and PT-059 housings and cannot be adapted to the Olympus PT-053 Housing.

Q: 8. Will it work with a panasonic fz80 and a 55-58 step-up ring?

A: Yes Vivitar 58mm 0.43x Wide Angle Attachment Lens will work on the FZ80 with a 55-58 step-up ring.

Q: 9. The original M52 from backscatter comes with fiber optic cable adapter. Is it included in the box?

A: Yes, the Backscatter M52 Wide-Angle Air Lens for Olympus PT Series Underwater Housings comes with the Fiber Optic Cable Adapter.

Q: 10. Is it a wet lens?

A: The Backscatter M52 Wide-Angle Air Lens for Olympus PT Series Underwater Housings is a wet lens that has 52mm filter threads. This lens is perfect for the Olympus TG series cameras in the Olympus housing.