Long Range Ir Illuminator 940Nm 60°

Long Range Ir Illuminator 940nm 60° - Iluminar Ir919

Product Code: eq177939
Availability: In Stock

$2,637.00 $3,269.88

Qty

7 reviews Write a review

Description
Reviews (7)

The IR919 Series Long Range IR Illuminator from Iluminar emits infrared illumination, which is invisible to the human eye but can be seen by a night vision camera with its IR cut filter removed. The illuminator has a 60° light distribution angle that provides an HOV of 226’ and a range of 197’.

The IR919 illuminator is designed to provide IR lighting for CCTV systems. With an IP67 rating, the illuminator is weatherproof and can be used outdoors. The hardened housing provides protection from harsh weather conditions and rapid temperature variations (-58 to 140°F). This covert camera is not effected by light pollution and has a longer range (197’) than visible light illuminators due to its higher wavelength.

Parameters
Electronics	High efficiency surface mount high-power LEDs with advanced current limited integral control circuitry
Number of SMT LEDs	32
Front Window	Polycarbonate high transmittance protective IR filter
Construction	Aluminum extrusion
HOV	226' (69 m)
Angle	60°
Range	197' (60 m)
Power Cable	9' (3 m)
Interface Connector	Photocell following contact & remote telemetry input
Pressure Equalization Vent	Prevents thermal expansion & pressure cycling
Photocell	Adjustment via pot
Illumination	Adjustable via pot
Operating Temperature	-58 to 140°F (-50 to 60°C)
Wavelength	940 nm
Electrical	24 VAC
Input Current	2.2 A at 24 VAC
Consumption	52 W
Mount	Black powder-coated stainless steel wall mount. Adjustable via M6 Allen key (included)
Safety	EN60598:2004: Electrical Safety EN60825-1: Laser Eye Safety
IP	IP67, in accordance with EN60529:1992
EMC	EN61000, FCC part 15.107, 15.108 Class B
WEEE	Waste Electrical & Electronic Equipment European directive 202/96/EC
RoHS	Restriction of Hazardous Substances European directive 202/95/EC
Dimensions	8.4 x 4.3 x 3.1" (21 x 11 x 7.8 cm)
Weight	3.9 lb (1.75 kg)

Long range IR illuminator

SMT LED technology

Range of 197'

60° light distribution angle

940nm wavelength

Covert illuminator with no visible glow from illuminator, making it ideal for transportation or high-security applications

Low power consumption (52W)

Long life

IP67 weatherproof rating

Built-in photocell IR on/off

Telemetry input for remote switching

24 VAC input

Related Questions and Answers

Q: 1. Any and all ways to use this? From my conclusion, I'd need the DJI RS3 PRO, the focus wheel assembly, and this LiDAR unit. Is there more to know? Also, I have the Sigma 24-70 F1.8 with continuous focus wheel rotation and no hard stops for my lumix s5, can I use it with this successfully?

A: The DJI LiDAR Range Finder for RS allows for use with non-hard stop focus ring lenses.

Q: 2. Will this pack fit a z6 II with 24-120 + hood attached?

A: The Nikon Z6 II Mirrorless Camera and the Nikon NIKKOR Z 24-120mm f/4 S Lens (Nikon Z) with hood attached does fit in the Vanguard VEO RANGE T37M Backpack (Black).

Q: 3. Is this compatible with dji rs2?

A: At present time, the DJI LiDAR Range Finder for RS (B&H# DJRSRF) is only compatible with the DJI RS 3 Pro Gimbal Stabilizer (B&H #DJRS3P) and there has not been any announced intention to make it work with any other gimbal(s) as of this time.

Q: 4. What makes sennheiser's fur any different than a much more inexpensive brand please?

A: Sennheiser's long track record for quality in assurance, materials, and workmanship is difficult to match.

Q: 5. Does this include the bottle holder?

A: According to Vanguard's website on the VEO T45M, it does. :) https://www.vanguardworld.com/products/veo-range-t-45m-bg-backpack-beige "This backpack also comes with a detachable bottle holder that can be attached to the webbing."

Q: 6. Will this also take care of active track without Raveneye?

A: Yes, The DJI LiDAR Range Finder for RS gimbals would also provide motion tracking data to the gimbal. The LiDAR Range Finder (RS), RS 3 Pro supports ActiveTrack Pro, delivering better subject identification and tracking performance.

Q: 7. Does this bag come only with the dividers shown? Can it fit a Fuji XT3 with Fuji 150-600 attached, with room for more?

A: Yes, the Vanguard VEO RANGE T45M Backpack includes dividers and can also fit FUJIFILM XF 150-600mm f/5.6-8 R LM OIS WR Lens.

Q: 8. Is the Lidar frequency closer to 905 or 1550 nanometers?

A: DJI does not provide any information about the DJI LiDAR Range Finder frequency range.

Q: 9. Wich lenses can the rangefinder interface directly connect to via 4-pin lemo to not need to calibrate the lenses? Would Cooke /I and Zeiss/XD work via 4-pin lemo port?

A: So far, these are the lenses that have been announced as working with the DJI LiDAR Range Finder for RS (B&H# DJRSRF) without calibration, and none other: DZOFilm VESPID Cyber Full Frame 35mm T2.1 Prime Lens (PL & EF Mounts) (B&H# DZOVC03521) DZOFilm VESPID Cyber Full Frame 50mm T2.1 Prime Lens (PL & EF Mounts) (B&H# DZOVC05021) DZOFilm VESPID Cyber Full Frame 75mm T2.1 Prime Lens (PL & EF Mounts) (B&H# DZOVC07521)

Q: 10. It says it has a padded sleeve for a 9.7 inch laptop/tablet and it also says "Holds a DSLR or mirrorless camera, 5 lenses up to 200mm f/2.8, and a 13" MacBook or a 15.6" laptop (similarly-sized laptops)". So is there room for a 15 inch laptop?????

A: That information is incorrect it only fits a 9.7 inch laptop. I will email the web department to fix that.

Al	29/09/2024
[197' (60 m)] Using this to light up the side yard all the way to the back fence, about 90 feet. Just like in Iluminar's youtube videos this thing throws IR light everywhere. I love that a separate camera in a opposite corner that just sees the backyard sees the massive amount of IR light that it puts out. I have this model and the IR148 both are built solid after a year later still waterproof and working fine. 5

Ties	16/09/2024
[2.2 A at 24 VAC] Pros - multiple angles - multiple brightness settings - remote (not included) - poe+ - build quality Cons - expensive 5

Greg R.	07/08/2024
[32] This really lights up the target area. It was well worth the purchase price. Just realize that it's a large, heavy light. The mount is cheaply made. I don't know who they have making it, but it doesn't have the ATN quality that I expected. I had to re-tap the screw holes just to get it mounted. The adjustments are a little awkward and with heavy recoil it tends to move. 5

Christopher m.	25/07/2024
[226' (69 m)] This light was an awesome upgrade increase the view of my scope by many yards over the light that came with the scope would highly recommend it. 5

Gary	06/07/2024
[9' (3 m)] This illuminator greatly improved the night visibility of my security camera. I am very pleased with it. Worth the money. 5

Allen	15/05/2024
[2.2 A at 24 VAC] I bought a similar version from another manufacture to increase the license plate reading capability of my Dahua 5442E-Z4E license plate camera. It was a nice step in the right direction. So, I decided to up the IR some more and see how that would work. While searching the internet I found this model with double the IR power. I bought one and it was an even bigger success. I can now read close to 100% of the plates. So, I have ordered two more to go in my other locations. By the way, this one draws 1 Amp @ 12vdc of power according to the spec sheet that came with the camera. For comparison the other one draw 4/10 of an amp at 12vdc. I am very impressed with this unit. 5

Allen	30/11/-0001
[32] After I bought the first one and seeing how good it was, I ordered 3 more. They are that good for license plate reading. I have to say that I am now in the 99 percentile in reading license plates. I am going to post a picture of a golf cart with a standard California plate. The measured distance is 187 feet. The camera I am using is a Dahua 5442E-Z4E at full extension. I do not recommend using this camera at over 75 feet for license plate gathering. 5