Transmit video up to 230' using this 2-gang Atlona HDMI VGA HDBaseT Transmitter Wall Plate UKfrom Atlona. The wall plate can transmit up to 4K60 video and features one HDMI input, one VGA input, one 3.5mm analog audio input, and an RJ45 HDBaseT output. The wall plate has a 2-gang design and is designed for UK wall plate installation.

The AT-HDVS-150-TX is designed to pair with the AT-HDVS-150-RX receiver plate to transmit and receive 1080p HD video at distances up to 230'. The wall plate features an input-select button to choose between the HDMI or VGA inputs, but it can also auto-switch depending on signal and power availability. There is also an On/Off button on the front to control the display connected to the receiver on the other end. An LED indicator lights up when there is an active link over the HDBaseT connection on the back.

There is also a 3.5mm stereo audio connector on the front that allows you to pass through analog audio. A mini-USB port on the back of the plate provides the ability to update the unit's firmware.

Transmit HDMI and VGA over HDBaseT    Works with AT-HDVS-150-RX Receiver    Powered by the Receiver using PoE    3.5mm Stereo Audio Pass-Through    Source Hot Plug Auto-Switching

One HDMI input plus one VGA input with 3.5mm audio pass-through

Transmits AV up to 230' at 1080p or 130' at 4K/UHD using Cat 6a/7 cable

Extends AV up to 230' at 1080p or 1920 x 1200

Allows advanced HDMI display devices to be used with legacy VGA sources

Power for transmitter is supplied by AT-HDVS-150-RX over HDBaseT

Shallow, 1.5" deep enclosure and recessed RJ45 HDBAseT connector simplify integration

Auto-switches to active input when sources are connected or if there is a change in source power status

LED indicators provide power and input selection status information

Mini-USB port provides an easy means for device updates

Related Questions and Answers

Q: 1. I have a sony Battery NP-F970. Which Sony mounting plate would that fit?

A: If you have a Teradek system with a 2 Pin Lemo connection for power you will need the Teradek L-Bracket Battery Plate for Sony L-Series or Canon LP-E6 Battery instead, BH #TE110759. https://bhpho.to/2ZcejnF

Q: 2. Compatible with bolt 6 receivers?

A: Yes, this battery plate is compatible with the Teradek Bolt 6 Receiver.

Q: 3. Does this terminate in a 4 pin or 2 pin lemo connector?

A: This terminates with a 2 Pin lemo.

Q: 4. Comes with a Two-Pin Lemo Power Cable, but what's on the other end, D-tap?

A: On the other end of the Two-Pin Lemo Power Cable is a D-Tap connection.

Q: 5. Does this have LUT compatibility?

A: The Ghost Eye can not augment the signal itself. It will send whatever you send down the HDMI or SDI signal, but cannot add anything. If you can send a LUT down the line, it will send the LUT.

Q: 6. How long does it last on a 7.4V 4400mah battery?

A: I have not tested this yet. I plug direct to P-Tap of rig or monitor setup.

Q: 7. I see there is no loop out on the transmitter for SDI, can I use the HDMI out on the transmitter if I use the SDI input?

A: Yes, the Accsoon CineView 2 SDI/HDMI Wireless Video Transmitter/Receiver Kit transmitter can loop out the SDI input through the HDMI output.

Q: 8. Does this fit the Sony BPU batteries, or is it a different battery style?

A: Yes, this plate is for Sony BP-U Style Batteries.

Q: 9. Hi. Can I record 4k Raw 12 bit and at the same time transmit the signal through the hd cinegear?

A: Don't think the transmitter takes 4K. but operationally you can always loop out from either your camera or the recorder itself, presuming your recorder is at the camera end of things.

Q: 10. Is this a product that could piggy back on a local Wi-Fi signal to transmit video?

A: No. It uses its own transmission.