Vocopro Vhf-Module 2-Channel Wireless Mic Module

Vocopro Vhf-module 2-channel Wireless Mic Module

Product Code: eq178063
Availability: In Stock

$417.00 $521.25

Qty

20 reviews Write a review

Description
Reviews (20)

The VocoPro VHF-MODULE 2-Channel Wireless Mic Modulefrom VocoPro VHF-MODULE 2-Channel Wireless Mic Moduleadds dual VHF wireless microphone channels to SOUNDMAN, CHAMPION-RV, and HERO-RV touring sound systems. It comes with two wireless mics and a receiver unit with individual mic volume control. It must be used in combination with a compatible unit only and does not work standalone. The field-replaceable design allows for quick installation, requiring only a screwdriver.

Parameters
Frequency Band and Operating Channels	A: Channel 13, Frequency: 213.74 (Blue) B: Channel 8, Frequency: 185.8 (Green)
Packaging Info
Package Weight	3.2 lb
Box Dimensions (LxWxH)	11.5 x 10 x 2.5"

SOUNDMAN, CHAMPION-RV, HERO-RV

Frequency Set: VHF A, B

Two wireless microphones included

Individual volume control for precise vocal balancing

Antennas attach securely via BNC connectors to provide clear RF reception

Related Questions and Answers

Q: 1. What frequencies specifically? And, What is the Sensitivity of the mics in dBs?

A: The manufacturer has not provided these specs for the VocoPro ACAPELLA-16. The listed frequency band is the 900 MHz band, but individual frequencies or microphone sensitivity is not provided.

Q: 2. Will this work with an existing dual-handle nato rig such as the Tilta Dual Handle or the Small Rig Dual Handle? Or does it block the Nato ports on the side of the Gimbal?

A: The Tilta Wireless Control Receiver Module for RS 2 will not work with the SmallRig Dual Handgrip for DJI RS 2/RSC 2 Gimbal but will work with the Tilta Dual Handle Power Supply Bracket.

Q: 3. Is this compatible with Edelrkone HeadOne too?

A: Not that we are aware of. This product is compatible with the HeadPlus, B&H # EDHEADPLUS. Compatibility with the HeadOne is not listed.

Q: 4. does the focus module fit with with Pan + Tilt (Dual HeadONE)?

A: The HeadONE is not listed under compatible products. This focus module is compatible with the HeadPLUS and the HeadPLUS PRO.

Q: 5. do we need the wifi?

A: The DNP DS620A, DS820A, QW410, DS-RX1HS, DS40, and DS80 printers can all work without the DNP WCM Plus Wireless Connect Module, but the module is a good option to print from phones, tablets, or computers without a wired connection.

Q: 6. does this work with the rs3 pro?

A: Yes, the Tilta Wireless/Wired Control Receiver Module for RS 2 is compatible with the DJI RS 3 Pro.

Q: 7. The included Edelkrone focus ring adapters bump into the module during calibration. If I were to put something like a Tilta Follow Gear Ring adapter around a Canon EF lens, what would happen during the Edelkrone's app calibration? Would the lens spin forever because there are no hard stops? Or would it find it.

A: Typically during the calibration process you would be able to stop the rotation at the lens's focus end points and the motors will digitally mark the end points, knowing the min and max focus throw.

Q: 8. What is the Antenna Connection?

A: The antennas have BNC connectors.

Q: 9. Is there any warranty on this system?

A: VocoPro includes a Limited 1-Year USA Warranty.

Q: 10. Can it be plugged directly into an audio mixer to record music?

A: The VocoPro SDR-4 Digital SD Card Recorder Module is compatible only with the VocoPro PA-PRO 900, STAGE-MAN, and MOBILEMAN.

Silvia	19/09/2024
[3.2 lb] If you have several printers, I'm my case the DNP printers, i would highly recommend this module! you can plus up to three printers into it and print wireless!!!! Amazing for the DNP printers and so much easier than trying to plug all printers in to print. 5

Joshua	09/09/2024
[3.2 lb] Works for my printer which is DNP. My photobooth business now has prints because of this Module. 5

Wayne	02/09/2024
[3.2 lb] Purchased to allow my Wimberly F-6 to an F-1 for use without the Sidekick. Since it is part of the F-1, there are no compatibility issues. 5

Alfredo	01/09/2024
[3.2 lb] Good quality and prfomance 5

HDN	03/08/2024
[3.2 lb] I bought the F9 bracket package for the Wimberley head. I added this and one other piece to that set so I could also have a set up to use the bracket off of the tripod. It works fine and seems very sturdy. 5

Jose	15/07/2024
[3.2 lb] The sound is Excellent and the price is even better. 5

Michael	15/07/2024
[3.2 lb] Works well with my DS80, which I have had for over 8 years, planning on getting one of the new printers to do 4x6 prints for home printing. Dye-sub prints are much better than inkjet. 5

Chris	08/07/2024
[3.2 lb] These mics sound great, dynamic and professional. We use for out praise and worship singers. They sound great and full. Hooked up to the Mackie v3 pro22. Highly recommended for a nice price compared to the Shure which is much more expensive and not sold in bundles only separate. 5