Vocopro Vhf-Module 2-Channel Wireless Mic Module

Vocopro Vhf-module 2-channel Wireless Mic Module

Product Code: eq178064
Availability: In Stock

$417.00 $562.95

Qty

11 reviews Write a review

Description
Reviews (11)

The VocoPro VHF-MODULE 2-Channel Wireless Mic Modulefrom VocoPro VHF-MODULE 2-Channel Wireless Mic Moduleadds dual VHF wireless microphone channels to SOUNDMAN, CHAMPION-RV, and HERO-RV touring sound systems. It comes with two wireless mics and a receiver unit with individual mic volume control. It must be used in combination with a compatible unit only and does not work standalone. The field-replaceable design allows for quick installation, requiring only a screwdriver.

Parameters
Frequency Band and Operating Channels	C: Channel 9, Frequency: 187.75 (Orange) D: Channel 12, Frequency: 205.75 (Red)

SOUNDMAN, CHAMPION-RV, HERO-RV

Frequency Set: VHF C, D

Two wireless microphones included

Individual volume control for precise vocal balancing

Antennas attach securely via BNC connectors to provide clear RF reception

Related Questions and Answers

Q: 1. Will this pair with the Ronin 2 remote?

A: This Tilta Remote Control Receiver Module for RS 2 pairs with the RS 2 Remote Control Handle for Advanced Ring Grip, Float System and Remote Control Kit to allow you to remotely control the gimbal, camera, and DJI wireless lens control motor.

Q: 2. Will this trigger a Canon ST-E3-RT?

A: Unfortunately, it will not. This is for the Godox X wireless radio system.

Q: 3. Can it be plugged directly into an audio mixer to record music?

A: The VocoPro SDR-4 Digital SD Card Recorder Module is compatible only with the VocoPro PA-PRO 900, STAGE-MAN, and MOBILEMAN.

Q: 4. Does this work with the RS3 pro gimbal?

A: Yes, the Tilta Wireless Control Receiver Module B&H # TIGARCR would also support the DJI RS3 Pro Gimbal.

Q: 5. Before I buy this, I need to know if this will work with the Sekonic L-358? I see someone said yes, but when I did a search online everything I'm seeing it only works with the L858D-U.

A: No, The following unit is designed and made for the speedmaster L-858D-U Light Meter. Not the L-358.

Q: 6. does this work with the rs3 pro?

A: Yes, the Tilta Wireless/Wired Control Receiver Module for RS 2 is compatible with the DJI RS 3 Pro.

Q: 7. Is this compatible with Edelrkone HeadOne too?

A: Not that we are aware of. This product is compatible with the HeadPlus, B&H # EDHEADPLUS. Compatibility with the HeadOne is not listed.

Q: 8. does the focus module fit with with Pan + Tilt (Dual HeadONE)?

A: The HeadONE is not listed under compatible products. This focus module is compatible with the HeadPLUS and the HeadPLUS PRO.

Q: 9. can we use Shure wireless with Vocopro?

A: No, Shure wireless components are not directly compatible for use with the VocoPro Acapella-8 Eight-Channel Digital Wireless System with Handheld Microphones. Independent Shure wireless systems could possibly be used alongside this system, however.

Q: 10. If i buy 2 sets of these to run on a 32 channel mixer for a school play.. Can all 32 run on all different channels?

A: If you use two of these VocoPro Digital-Play-16 systems, for a total of 32 wireless mics, in the same location, they will interfere with one another. For a school play, I would highly recommend using wireless for no more than 8 or 12 lead actors, and micing up the rest of the cast using hanging choir mics or boundary mics placed strategically on the stage. A combination of wired and wireless mics will allow for reliable operation and good quality sound, while keeping the total cost of the system more manageable.

Victoria	14/09/2024
It wasn't easy to find exactly what I was looking for, so when I stumbled across this website I was thrilled. Not only did it ship fairly quickly they were the exact replacement parts I needed. Fit like a glove, and installation was hassel free. Thank you! 5

Silvia	19/08/2024
If you have several printers, I'm my case the DNP printers, i would highly recommend this module! you can plus up to three printers into it and print wireless!!!! Amazing for the DNP printers and so much easier than trying to plug all printers in to print. 5

Daniel	19/08/2024
I was looking for an economical way to connect several workstations to different printers. I was a bit skeptical at first because of the bad reviews on previous versions. But this one, after testing, is really suited to our needs. I recommend it. 5

Laszlo B.	29/07/2024
The M-9 Module is an excellent quality item and it works perfect. Very pleased with it. Delivery was fast too. 5

Kenji	11/07/2024
I used to have the previous WCM unit and works fine I'm still learning all the new features and it feels a little bit faster but I'll take my time to see how is this better! 5

Desiree	13/05/2024
came in super quick - 2 days and was able to use it right away! 5

David	12/05/2024
This is the most cost effective option for controlling 2x1 Gemini via Luminradio DMX. 5

Reyhan	03/05/2024
So I tried to use my computer background and configured an old laptop as an AirPrint server for my photobooth business. Lets just say, I got tired of having to haul a laptop and connect everything needed for it to work at every gig. I went ahead and purchased this WCM+ and it made my setup and breakdown time cut down by nearly 75%. This module when properly setup, can be everything you need to be your central printing center at any photobooth event. The transmission signal and wireless hotspot capability was something that surprised me to most. All I can say is, get one of these if you plan on using any of the newer DNP printers in your event space. It will save you TONs of time. 5

anyonymous	03/05/2024
I have this Module installed in in my Sekonic L358 light meter and I will have to tell you that I am impressed. I am using the Radio Popper receiver also for the Eisstein 640 and it triggers my flash unit every time I want to take a meter reading. I have was just having to much trouble with the other popular brand and decided to give this a try and I'm so glad I did. 5