The white Sanken COS-11D Omni Lavalier Mic for Sennheiser Transmittersis a subminiature lav microphone designed to deliver clear, full-bodied sound and reliable performance, making it a popular choice among industry professionals in broadcast, TV, theater, film, videography, and more. 

Engineered to meet the standards of modern digital wireless microphone systems, the COS-11D is RF shielded to eliminate interference issues and ensure a pristine audio signal. The microphone capsule features a rectangular design that sits vertically, increasing the surface area and allowing this tiny mic to offer a rich, full sound that outperforms many larger models.

The mic's 50 Hz to 20 kHz frequency response rolls-off extreme low end and provides accurate, transparent audio reproduction with a small presence boost in the 6 kHz area for crisp, intelligible speech. With a forgiving omnidirectional polar pattern that picks up sound in a 360° pattern, levels stay consistent even when the subject turns away from the mic.

A water-resistant mesh screen protects against humidity, perspiration, makeup, bad weather, and other potential on-location issues, while the durable cable is also moisture-resistant and built to stay soft and pliable, even after extended use. This version of the COS-11D terminates in a 3-pin LEMO connector and is wired for use with Sennheiser transmitters. Accessories are available separately and are not included with this configuration of the microphone.

For Broadcast, Film/Video & Presentation    Omnidirectional for Consistent Levels    For Sennheiser Transmitters with LEMO    -9 dB Reduced Sensitivity Level    Rugged 5.9' Cable Stays Pliable    RF Shielded for Digital Wireless    Water Resistant    Small Size is Easy to Conceal    Requires 3 to 10 VDC

• Sennheiser: Works with Sennheiser bodypack transmitters equipped with a LEMO 3-pin connector, including the SK 50-UHF, SK 250-UHF, and SK-2000/3000/5000/9000 models.
• Also works with third-party wireless transmitters that are equipped to supply 3 to 10 VDC through a LEMO 3-pin connector wired for Sennheiser compatibility.

Related Questions and Answers

Q: 1. Can I split the AF OUT of the EK500 with a 'Y' cable, run one side to my FX6's XLR, the other, to an onboard mini recorder? Thx.

A: Yes, you can use a Y-cable to split the output from a Sennheiser EK 500 Receiver to send the audio to two different devices, like two separate audio recorders, cameras, mixers, etc. You can use a cable like the Saramonic SR-UM10-CC1 3.5mm TRS to Two XLR Male Output Y-Cable for Wireless Mic Systems (B&H # SASRUM10CC1), or use an adapter like the ALZO 3.5mm Female to Dual XLR Male Stereo Microphone Adapter Cord for Pro Camcorders (B&H # AL130) together with the 3.5mm receiver output cable and, if needed, additional XLR cables to extend the length.

Q: 2. I want to buy shennheiser ew513 g4 gw1. the note is more on the way. So when can I buy? When will in stock?

A: The Sennheiser EW 112 G4 is Back Ordered not on the way. Back Ordered items can sometimes take a while to come in. The best thing to do is fill out the Request Stock Alert box. Then you will be emailed upon arrival of the product.

Q: 3. How do we know which frequency range to get? Is there a list showing which frequency range is best for specific countries?

A: These Sennheiser products are offered as legal devices in the USA only. Please contact Sennheiser directly in the country you'll be using this product in to purchase the correct system. We do not ship Sennheiser wireless products overseas.

Q: 4. Can we use two of the same models with the same frequency range at one time or do we need two different frequency systems? Basically, can we use two of the same exact transmitter/receivers simultaneously?

A: Yes you can, when scanning for a new frequency do one system at the time once you are done just make sure both systems are running in different frequency's.

Q: 5. It this model's frequency a good fit for recording in NYC?

A: Yes, frequency band A1 can be used in New York City. However, channels 14, 15, and 16 will be blocked for public safety deployment.

Q: 6. Will the mic that comes with this (Sennheiser EW 512P) work with the AVX transmitter?

A: Yes. The MKE2 mic is an excellent mic and will work with both the EW512 P and AVX.

Q: 7. Can these lavalier be wirelessly connected to a soundboard?

A: Yes. The Sennheiser EW 112P G4 Camera-Mount Wireless Omni Lavalier Microphone System can be connected to a soundboard (mixer). The system comes with two receiver output cables, one with a 3.5mm connector and one with an XLR connector. You can use the cable with the XLR connector to send the output from the receiver into a mic input on the board.

Q: 8. What’s the best mic for this unit? I’ve heard the included mic is average.

A: For me the best lav for the the G4 would be Sanken COS-11D Omni Lavalier Mic, Normal Sens, Hardwired 1/8" TRS Connector for Sennheiser Evolution Wireless Transmitter. It is a fantastic lav this is the B&H part number B&H # SAC11WNSETRB.

Q: 9. Does this work with a Panasonic G85 or G95 camera?

A: Yes, the Sennheiser EW 112P G4 Camera-Mount Wireless Omni Lavalier Microphone System would work with the Panasonic Lumix G85 Mirrorless Camera, as the camera has the necessary 3.5mm microphone input connection. The EW 112P G4 includes an adapter to mount the receiver onto the camera shoe, as well as the appropriate cable to connect the receiver's output to the camera's input. It does not appear that the Panasonic Lumix G95 Mirrorless Camera has the necessary 3.5mm microphone input connection, however.

Q: 10. The manual says to set AF Out on the receiver to +18 dB. Is this true? Why not 0db?

A: In general, Camera preamps are not the best quality. +18db ensures that you will need the least amount of preamp gain possible, which will maximize the quality you capture with the camera.