The Kirk LS-2 Lens Support for Camera Stabilityis a quick release lens support designed to be used with the Nikon 200-500mm f/5.6E ED VR or Sony FE 200-600mm f/5.6-6.3 G OSS lens. When using the LS-2 on the Nikon lens, it must be paired with the NC-200-500V2 lens collar. When using it with the Sony lens it must be paired with the LP-68 lens collar. The LS-2 stabilizes the lens and reduces shifting when you loosen the lens collar to rotate the camera. It is machined from 6061-T6 aluminum and has stainless steel bearings and bolts.

For Nikon 200-500mm f/5.6E ED VR    For Sony FE 200-600mm f/5.6-6.3 G OSS    Must be Used with Lens Collar    Stabilizes Lens When Loosening Collar    Machined from 6061-T6 Aluminum

Related Questions and Answers

Q: 1. Does LS1 and Kirk LP-65 kit support Sony new lens, 70-200 f2.8 GM OSS II?

A: The new Sony FE 70-200mm f/2.8 GM OSS II Lens will be able to use the Kirk LP-65 Replacement Lens Foot for Select Sony Lenses. You can use the Kirk LS-1 Lens Support Bracket for Select Lenses with this as well.

Q: 2. is it possible that this can used with other lenses that have a dovetailed lense plate?

A: I am using the LS-1 with the KIRK replacement foot on my Canon EF 100-400mm L II lens. They work very well together and support my lens at 2 points instead of 1 on a tripod. I find the combination is noticeably more stable than without it. I don't know if you can use this combo on other lenses . You would have to experiment. Kirk makes individual lens supports for specific lenses. For example,they make an LS-2 lens bracket for the new Nikon 200-500mm lens.

Q: 3. Will this work with the Canon RF 100-500mm lens?

A: The Kirk LS-1 Lens Support Bracket for Select Lenses is compatible with the Canon RF 100-500mm f/4.5-7.1 L IS USM Lens.

Q: 4. Is this good for Nikon P1000 or will the lip prevent screen swivel?

A: Yes, Kirk Universal Camera Plate it would fit properly on Nikon COOLPIX P1000 Digital Camera. The screw can be slide to adjust the space, The plate do not interfere with the LCD articulation or the battery compartment.

Q: 5. Will this plate fit a Nikon D5600?

A: Yes, but as with all cameras you have to put an adapter plate on the bottom of the camera with the arca swiss type dovetail groves that mate to this unit.

Q: 6. Will this also fit the Nikon Z8 w/o blocking the battery door?

A: No, the Kirk Camera Plate for Nikon Z9 Mirrorless Camera would not be a good fit for the Nikon Z8 Mirrorless Camera, as it is designed for the Z9. A better option would be the Kirk Base Plate for Nikon Z8, BH #KIPZ189 (https://bhpho.to/3tEe3Ty).

Q: 7. How do you decide if you need the LS-75 or the LS-80?

A: The Sunwayfoto LS-80 Ring Lens Support has an 80mm diameter, and the LS-75 version is 75mm. You would choose the size based on the diameters of your most common lenses.

Q: 8. What is the exact length of the camera plate meant for Nikon Z9 ?

A: The actual dovetail on the Kirk Camera Plate for Nikon Z9 Mirrorless Camera is 91mm long. The entire plate is 97mm.

Q: 9. Can you adjust the inner ring diameter or does it have to be an exact fit on the lens?

A: The inner ring of the Sunwayfoto LS-80 Ring Lens Support with Arca-Type Collar cannot be adjusted. Lenses supported by the Sunwayfoto LS-80 Ring Lens Support with Arca-Type Collar would have to have an outer diameter of 80mm. If your lens is smaller or larger than 80mm, there are similar collars that are different sizes you could consider instead.

Q: 10. Will this screw fit the small hole on the base of the BENRO PC-0 clamp? There are two SMALL holes on the base and I need such a screw for one of those holes

A: Unfortunately we cannot test these items. The Benro PC-0 is discontinued and the screw is a special-order item. It would be our best guess that the sockets underneath the pan head would be the same and it would be compatible with this screw, but you should contact the original manufacturer to get the exact measurements and specifications.