The white Sanken COS-11D Lav Mic for Lectrosonics, Reduced Sensitivity, TA5Fis a subminiature lav microphone designed to deliver clear, full-bodied sound and reliable performance, making it a popular choice among industry professionals in broadcast, TV, theater, film, videography, and more. 

Engineered to meet the standards of modern digital wireless microphone systems, the COS-11D is RF shielded to eliminate interference issues and ensure a pristine audio signal. The microphone capsule features a rectangular design that sits vertically, increasing the surface area and allowing this tiny mic to offer a rich, full sound that outperforms many larger models.

The mic's 50 Hz to 20 kHz frequency response rolls-off extreme low end and provides accurate, transparent audio reproduction with a small presence boost in the 6 kHz area for crisp, intelligible speech. With a forgiving omnidirectional polar pattern that picks up sound in a 360° pattern, levels stay consistent, even when the subject turns away from the mic.

A water-resistant mesh screen protects against humidity, perspiration, makeup, bad weather, and other potential on-location issues, while the durable cable is also moisture-resistant and built to stay soft and pliable, even after extended use. This version of the COS-11D terminates in a TA5F connector and is wired for use with non-servo-bias Lectrosonics transmitters. A metal windscreen, holder clip, rubber mount, and plastic case are included.

For Broadcast, Film/Video & Presentation    Omnidirectional for Consistent Levels    Wired for Lectrosonics Non-Servo TA5M    -9 dB Reduced Sensitivity Level    Rugged 5.9' Cable Stays Pliable    RF Shielded for Digital Wireless    Water Resistant    Small Size, Easy to Conceal    Requires 3 to 10 VDC    Includes Windscreen, Mount & Clip

• Lectrosonics: Works with Lectrosonics bodypack transmitters equipped with a non-servo TA5M connector including the UM200 and UM400 models.
• Also works with third-party wireless transmitters that are equipped to supply 3 to 10 VDC through a TA5M connector wired for non-servo-bias Lectrosonics compatibility.

Related Questions and Answers

Q: 1. Is there an adapter for lectrosonics compatible (TA5F) lavs, or would I need to get new lavs for this?

A: Although we have seen custom adapters to convert TA5F to 3-Pin Lemo, we recommend using lavaliers with dedicated wiring for the Lectrosonics SSM Digital Hybrid Wireless Miniature Transmitter. B&H does not offer adapters of this nature at this time.

Q: 2. can this Zanelli CARBON ZR Reduced Gimbal Head fit my Gitzo GT5532S SER 5 6X systematic ?

A: Hi Tin, yes you can At your disposal Best Regards

Q: 3. Does this Rycote Softie Kit MFR #033395 work with Schoeps CMC641-- MFR #CMC641G SET?

A: Yes, the Rycote 033395 Softie Kit for Sanken CS-M1 Microphone with Windshield and Shockmount can also be used with the Schoeps CMC641 Set Colette Series Supercardioid Microphone.

Q: 4. Does this transmitter work with the Lectrosonics IFBR1B Bodypack IFB Receiver (VHF: 174 to 216 MHz) ? I noticed the frequency range was slightly different so i want to be sure.

A: Yes, The Lectrosonics IFBR1B is compatible with IFBT4 transmitters, as long as there is frequency band overlap between the components

Q: 5. Does this antenna work with SRa receivers?

A: Yes it will: The Lectrosonics AMJ Color Coded Whip Antenna is a replacement antenna for the SM, UM200, UM400, UM190, UM195, UM400a and SRa beltpack transmitters. The antenna features a standard stainless steel connector SMA connector and nearly indestructible steel wire.

Q: 6. Is the blue cable included? This set contains set BH#SEWXSPLSTR?

A: Yes, the Sennheiser XSW-D Portable Lav Mobile Kit with Transmitter, Receiver, Lapel Mic, Mounts & Manfrotto PIXI Tabletop Stand does include the blue cable. There are two cables included with this kit. One is a locking 3.5mm TRS to 3.5mm TRS coiled cable, and the other is a locking 3.5mm TRS to 3,5mm TRRS coiled cable.

Q: 7. Will this work with a lightning adapter on an iphone 11?

A: By using the included TRRS adapter from Comica, this will work with an iPhone when being attached to a lighting to headphone jack adapter.

Q: 8. Can an individual mic work with a Sennheiser G3?

A: Sennheiser's bodypack transmitters accommodate one single microphone such as a lavalier or headset style mic that is designed to work with a Sennheiser wireless transmitter. The wireless receiver works with only one transmitter at a time, whether it's a bodypack with a lavalier mic or a handheld mic transmitter. Please contact us by phone or through live chat if you would like further assistance.

Q: 9. Can the Lectrosonics PCA900 Printed Circuit LPDA Antenna be used on a wireless microphone system?

A: as long as the frequencies match and you have an antenna input that will accpet a 50ohm BNC.

Q: 10. Can I simply attach this to a shoe mount on the FX3 and use it?

A: Yes. The CS-M1 will work with the FX3