The Impact ControlSync 16 Transmitter - SEO Titleprovides photographers with a wireless solution for triggering their select flash head at distances up to 150'. The ControlSync 16 is compatible only with Impact's AS-X-400 Astral Extreme and its kits. It also works with Interfit's Strobies line of flashes and the Angler Q-400. The 16-channel, 16-group transmitter has a built-in antenna and hot shoe and uses a separately purchased 16-channel, 16-group receiver that is powered by its host flash without using batteries.

Operating on the 433 MHz frequency, the ControlSync 16 Transmitter can raise and lower the power of the slave flash in 1/10 or 1/3 stop increments as well as turn modeling lights and audio alerts on and off. It's also capable of turning the AF assist on or off on flash units that have this feature. The ControlSync 16 transmitter runs on 2 AA batteries and is intended for use with the CS-16-R receiver. Besides triggering your flash from up to 150' away, the ControlSync 16 transmitter can be used as a handheld remote controller to adjust the settings on all your compatible flash units that are connected to a ControlSync receiver, even if you use a different device or method to trigger them.

For Impact Astral Extreme AS-X-400    Compatible w/ Interfit Strobies Flashes    ControlSync 16 Channel Transmitter    Raise or Lower Flash Power Remotely    Controls Modeling Lamps and AF Assist    150' Range, Controls Audio Alerts    View Transmitter Settings on LCD Screen

Related Questions and Answers

Q: 1. Can I use this PowerTrigger on a Nikon D7200 and Westcott Strobelite Plus?

A: Not familiar with Nikon. I shoot Cannon

Q: 2. Can I use this on a canon 6d mk ii?

A: The PowerSync Mini Digital Radio Slave System, the PS16-MINI-R Receiver from Impact is compatibe with the Canon 6D Mark ll and will allow manual triggering of flash units at distances up to up to 328'.

Q: 3. Will this trigger more than one flash unit or do two receivers need to be purchased?

A: A receiver for each flash/strobe needs to be purchased.

Q: 4. Will the transmitter work with a Nikon FE2 film camera? I need a way to fire a remote SB-910 speedlight.

A: The Impact PowerSync Mini Transmitter and Receiver Kit BH #IMPS16MINRTK can be used with a SB 910 and a Nikon FE2.

Q: 5. Can I plug the receiver into studio strobe setup? Like if the strobe light has mic plug-in! Will this plug-into the strobes to trip them?

A: Yes, and it includes 3.5mm Sync Cable and 3.5mm to 1/4" Plug Adapter in the box.

Q: 6. I purchased the 3 light kit and two additional transmitter and receiver sets. I noticed that when I use the test button, both strobes fire off fine, but when taking photographs, sometimes one of the lights will not trigger. Is anyone aware of similar issues? Using a Nikon D7100.

A: Always have backup batteries for this product because it can go at anytime. Agreed with other answer to switch up the battery and check the channel used. Also, might sound silly but make sure your wire connections/plug ins are all secure, nothing loose or adapters not fitting properly.

Q: 7. are these compatible with the older Impact PowerSync16 DC Radio Slave System?

A: No, the Impact PowerSync Mini Transmitter and Receiver Kit is not compatible with the older Powersync16 DC radio.

Q: 8. is this compatible with a Novatron V400-D to Lumix G9?

A: You would need one of these adapters to make it work https://bhpho.to/2NAN7OR.

Q: 9. Hi I'm not able yo use this... i have a canon 6D everything is plug well I have the trigger mount in the hot shoe of the camera but every time I press the shutter the light won't pop put if I press the test buttom it works perfectly. Batteries are ok I thinks is a problem between the camera and the trigger.. Any ideas? Also imposible to use the sync cord because i can not press the shutter it looks like it freeze. Thank you!

A: Received it today. It is not working on my Westcott Stroblite Plus. Won't work on the camera, and won't trigger the monolight with the text button. Tried all 16 channels. Any suggestions???

Q: 10. Would this work with Paul c buff light?

A: No, Impact ControlSync 16 Transmitter does not work with the Paul C buff light.