The black Sanken COS-11D Lavalier Mic for Lectrosonics Transmittersis a subminiature lav microphone designed to deliver clear, full-bodied sound and reliable performance, making it a popular choice among industry professionals in broadcast, TV, theater, film, videography, and more. 

Engineered to meet the standards of modern digital wireless microphone systems, the COS-11D is RF shielded to eliminate interference issues and ensure a pristine audio signal. The microphone capsule features a rectangular design that sits vertically, increasing the surface area and allowing this little mic to offer a rich, full sound that outperforms many larger models.

The mic's 50 Hz to 20 kHz frequency response rolls-off extreme low end and provides accurate, transparent audio reproduction with a small presence boost in the 6 kHz area for crisp, intelligible speech. With a forgiving omnidirectional polar pattern that picks up sound in a 360° pattern, levels stay consistent, even when the subject turns away from the mic.

A water-resistant mesh screen protects against humidity, perspiration, makeup, bad weather, and other potential on-location issues, while the durable cable is also moisture-resistant and built to stay soft and pliable, even after extended use. This version of the COS-11D terminates in a TA5F connector and is wired for use with servo-bias Lectrosonics transmitters. Accessories are available separately and are not included with this configuration of the microphone.

For Broadcast, Film/Video & Presentation    Omnidirectional for Consistent Levels    Wired For Lectrosonics Servo-Bias TA5M    Normal Sensitivity Level    Rugged 5.9' Cable Stays Pliable    RF Shielded for Digital Wireless    Water Resistant    Small Size, Easy to Conceal    Requires 3 to 10 VDC

• Lectrosonics: Works with Lectrosonics bodypack transmitters and recorders equipped with a servo-bias TA5M connector, including models in the SM and L Series as well as the UM400a, UM450, LMb, MTCR, and DBu (TA5M version) models.
• Also works with third-party wireless transmitters and portable audio recorders that are equipped to supply 3 to 10 VDC through a TA5M connector wired for servo-bias Lectrosonics compatibility.

Related Questions and Answers

Q: 1. Will this work for mounting a Sennheiser 865 Capsule on a Shure UR2 transmitter? Or no because the Sennheiser is a condenser?

A: Thank you for your question. you can use this item to mount the 865 capsule to any shure handheld transmitter.

Q: 2. Will these antenna work with various brands of radio receivers? E.g. if Im running both Lectros and Sennheiser

A: Yes! It's brand agnostic.

Q: 3. Does this transmitter work with the Lectrosonics IFBR1B Bodypack IFB Receiver (VHF: 174 to 216 MHz) ? I noticed the frequency range was slightly different so i want to be sure.

A: Yes, The Lectrosonics IFBR1B is compatible with IFBT4 transmitters, as long as there is frequency band overlap between the components

Q: 4. will this work in an Olympus ZX1?

A: Unfortunately, the Lectrosonics LB-50 Rechargeable Li-Ion Battery Pack for SSM Transmitter & IFBR1B Receiver is not compatible with the Olympus ZX1.

Q: 5. Will this work with a digital recorder or a VIXIA 82 camcorder?

A: thank you for your question. This will work with the Vixia 82 an with any audio recorder that has a stereo mic input and can provide plug in power.

Q: 6. Will this work with the Zoom h1?

A: I have used this product with the zoom H6 only, and it works well.I am not sure about the zoom h1. If there is a connection on the device, it should work just fine.

Q: 7. Will this work with a portable audio recorder like the Zoom H4N or the Tascam dr-40 (I think it'd need a 1/4 adapter for that one)?

A: I use it with a Zoom H4N and it works very nicely. I did not need an adapter for it.

Q: 8. Does this antenna work with SRa receivers?

A: Yes it will: The Lectrosonics AMJ Color Coded Whip Antenna is a replacement antenna for the SM, UM200, UM400, UM190, UM195, UM400a and SRa beltpack transmitters. The antenna features a standard stainless steel connector SMA connector and nearly indestructible steel wire.

Q: 9. Is the DCHR immune from being fried by + 48V phantom power?

A: Correct

Q: 10. Is the DCHR compatible with the Lectro LT?

A: I'm sorry, but this receiver will only work with the Lectrosonics digital transmitters, such as the DCHT, M2T, DBu, DHu, and DPR series models.