The Tiffen 95mm Coarse Thread T1/2 IR Filteris a near-infrared to infrared control filter that is designed for digital cinematography. Many digital motion-picture cameras are designed to maximize their ability to capture red hues, and in that process near-infrared or infrared contamination may occur. If the proportion of near-infrared or infrared light that reaches the sensor of a digital cinematography camera becomes too great, the results can show unwanted color shifts, particularly in dark areas of the frame such as shadows where the appearance of black is dominant.

When the Tiffen 95mm T1/2 IR Filter is used, near-infrared light waves beginning at 680nm are blocked by approximately 45%. Infrared light waves at higher frequencies are further impeded until nearly flat attenuation is achieved at 775 to 800nm. This process helps to ensure that the light that falls on the camera's sensor is limited to the visible spectrum. Potential near-infrared or infrared color shifts are prevented or minimized, which preserves color accuracy throughout the frame. While a Tiffen T1/2 IR Filter is sufficient for many cameras, others may have sensors that require a higher degree of near-infrared and infrared control, such as that provided by a Tiffen T1 IR Filter.

This filter is constructed from Water White glass for increased clarity as well as color fidelity. It is made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass, grinding flat to a tolerance of 1/10,000th of an inch, and then mounting to precision metal rings.

Infrared Control Filter    For Digital Cinematography    Blocks Near-IR to Infrared, 680 to 800nm    1.41x Filter Factor, 0.5 Stop    Prevents Near-IR and IR Light Pollution    Maintains Appearance of Dark Areas    Helps Preserve Color Accuracy    Water White Glass Construction    ColorCore Technology    Plastic Case

• Designed for use with CCD or CMOS sensors to filter out near-infrared and infrared light pollution that cause color shifts frequently associated with high-definition recording
• Blocks near-infrared light waves beginning at 680nm by approximately 45% until nearly flat infrared attenuation is achieved at 775 to 800nm
• Constructed from Water White glass for increased optical clarity
• No dichroic coatings to further ensure color accuracy
• 1.41x filter factor reduces exposure by 0.5 stops
• Thin filter ring helps to prevent vignetting
• Plastic filter case for storage and transport

  Related Questions and Answers

  Q: 1. Does it work on X-t2?

  A: I asked Fujifilm (the technical department). They told me that each model is specific in terms of the functioning of the battery grips.

  Q: 2. Is this compatible with the DS1819+?

  A: Yes, the Synology E10M20-T1 M.2 SSD & 10GbE Combo Adapter Card BH #SYE10M20T1 is compatible with the Synology DS1819+.

  Q: 3. hi will this gripp fit fujifilm xt20?

  A: Unfortunately this grip is not compatible with the XT20.

  Q: 4. WILL THIS ALSO FIT THE NEW Fujifilm X-T2 ?

  A: I asked Fujifilm (the technical department). They told me that each model is specific in terms of the functioning of the battery grips.

  Q: 5. What is the make & model of the network controller chip on this card?

  A: Synology has not made these details available in relation to the Synology E10M20-T1 Adapter Card.

  Q: 6. Is WD 1TB Black SN750 NVMe M.2 SSD working with this card?

  A: Yes, this will work with the WD 1TB black NVMe Drive.

  Q: 7. Would a Crucial 4TB P3 Plus NVMe PCIe 4.0 M.2 Internal SSD card work with this?

  A: Synology has not listed any non-Synology drives on their compatibility list for the E10M20-T1 M.2 SSD & 10GbE Combo Adapter Card, but any PCIe M.2 2280 or 22110 drive should work.

  Q: 8. Does a battery need to be in the camera in order to function?

  A: No you do not have to have a battery in the body in order for this grip to function.

  Q: 9. Has anyone tried a 990 Pro? Seems like folks are having luck running the older 970 Evo's but the pricing is about the same now

  A: The Samsung 990 Pro is not on Synology's SSD compatibility list for the Synology E10M20-T1 M.2 SSD & 10GbE Combo Adapter Card.

  Q: 10. Is this compatible with the DS1817+ ? It is not explicitly listed, but it has a PCIe 2.0 x8 slot

  A: Unfortunately the DS1817+ isn't compatible.