Keep your rig up and running with the Thermaltake Smart 600W 80 PLUS PSUfrom Thermaltake. Featuring a standard ATX form factor and Intel ATX12V Version 2.3 compliance, this 600W, PSU utilizes a single +12V rail and 120mm cooling fan. Furthermore, it boasts an 80 PLUS efficiency rating and delivers 82 to 86% efficiency at 20 to 100% load. Alongside motherboard and CPU connections, this power supply also sports 3 peripheral 4-pin, 6 SATA, and 2 PCIe connectors, as well as a 4-pin floppy connector. The Thermaltake Smart 600W 80 PLUS Power Supply has an mean time between failures (MTBF) of 100,000 hours, minimum.

600W Single +12V Rail    120mm Cooling Fan    Intel ATX12V Version 2.3    2 x PCIe Connectors    6 x SATA Connectors    3 4-Pin Connectors    82 to 86% Efficiency at 20 to 100% Load    100,000 Hour-Minimum MTBF

Featuring a 120mm cooling fan optimized for quiet airflow, the Thermaltake Smart 600W PSU is designed to provide low noise levels.

Related Questions and Answers

Q: 1. Is Zoom, Skype, etc. on the OSD menu? Is this webcam compatible with them?

A: No, they are not on the OSD Menu. The only parameters you control on the OSD are for the image quality and camera settings. You would simply set the webcam as your video source in Zoom or Skype and that's it. It is compatible with Skype and Zoom as well as many of the other popular online video services available.

Q: 2. Would this work to trigger my Elinchrom Five from a Leica SL-2S?

A: The Impact PowerSync16-80 Transceiver (2-Pack) is not compatible with the Elinchrom FIVE monolight.

Q: 3. There is no patent issue with Pocket Wizard?

A: None, I love it. Can't wait to use it.

Q: 4. Is device compatible with Sony A7RIII for remote trigger? If so does it require a cable from device to camera?

A: To trigger the A7R III remotely, you would need one of these units connected with the Vello 3.5mm Remote Shutter Release Cable for Select Sony Cameras with Multi-Terminal, BH #VERCCS235, while the second Impact unit is the transmitter in your hand. https://bhpho.to/2GvqNAr

Q: 5. Good day, may I know if this transceiver support HSS and TTL? I also want to believe it should be able to work with old Minolta/Sony flash like the 5600 HS Shoe Mount Xenon Flash (For Minolta) and Sony ILCA-A77M2 while also using the necessary adapters like the TF-323 SONY & Minolta TTL Hot Shoe to PC Sync Adapter.

A: The Impact PowerSync16-80 Transceiver is a fully manual transceiver. It does not have TTL or high Speed Sync capabilities. As the Minolta 5600HS Flash does not have a PC sync terminal, you would need to purchase a hot shoe adapter such as the Vello HSA-CSMSA Multi-Interface to Sony/Minolta Shoe Adapter, B&H # VEHSACSMSA, to connect the Impact PowerSync 16-80 Transceiver to the Minolta 5600HS Flash.

Q: 6. Is this compatible with a canon 6d markii?

A: This can be used with the Canon EOS 6D Mark II.

Q: 7. is it work for sony alpha 6000 Impact PowerSync16-80 Transceiver ?

A: Unfortunately, the PowerSync 16-80 is not recommend for use on a Sony camera with the Multi-Interface shoe like the A6000 since it is made for us on a standard hot shoe. For a radio trigger that will work on the A6000, you might want to consider the Pocket Wizard Plus III. Please see the link for reference: a href= http://bhpho.to/KhiuJ6. target= _blank http://bhpho.to/KhiuJ6./a You would need two to make the system work: one for your A6000 and one connected to your flash.

Q: 8. Can I use this transceiver with Elinchrom D-Lite 400W/s RX 4 Flash Head?

A: If you had 2 of these transceivers you could use it with the Elinchrom D-Lite 400W/s RX 4 Flash Head. The Impact PowerSync 16-80 will not fire the internal receiver on the Elinchrom. You need to have 1 PowerSync 16-80 attached to the 3.5mm sync port of the Elinchrome and 1 PowewerSync 16-80 on the camera.

Q: 9. Will these work on a sony A7 II and a YN560-II speedlite?

A: Yes. I have both and it works with both.

Q: 10. Is this camera compatible with windows 10?

A: Yes, this camera will have no issue with Windows 10.