this lower rail clamp for 15 mm rails features front-back adjustment for balancing, and allows industry standard accessories such as follow focus or matte box to be attached for building cine-style rigs.

• Industry-standard 15 mm rail support
• Front-to-back balancing
• Tool-less quick attachment and release

Related Questions and Answers

Q: 1. will the thumbwheel mount onto the Movi Pro ring?

A: HI Derekyes, you will just want to add the universal clamp adapter and you are good2-136-0002 Collins Clamp microRemote Fingerwheel Upgrade $85

Q: 2. How can you change the focus throw?? I get how to change Gain/smoothness but want to adjust the throw. At the moment, if you turn the Remote only a few millimetres it will focus the lens quite extremely. I hope that makes sense!?

A: Hi Dane - the microRemote has 270 degrees of throw which should be more than enough for almost any lens (with the exception of macro lenses that have )you can manually calibrate to a portion of the lens' throw so you can get even more granularity for shots that have limited range. If you are looking for additional support and you own a microRemote please contact our support group at support@redrockmicro.com - they can offer more assistance there. Thanks

Q: 3. Does Pelican 1450 will be big enough to fit the Halo Solo Complete bundle with couple extra Canon LP-E6 batteries and can i fit in this case a handheld micro remote controller? Or i will need a bigger case like Pelican 1520?Or even that case will not be enough to fit all stuff i mentioned above?

A: Hi Iaroslav - please drop us a line at sales@redrockmicro.com with this question. We need to do some checking on a pelican equivalent to make a recommendation, which we're happy to do.

Q: 4. I want to use this on the Dji Ronin M, What else do I need to buy to make this work? Just a Ptap Cable to power it from the Ronin M? I basically want to be able to be a single operator with the thumb controller. Where Can I find out what all I need to make this work. I live in South America and do not want to have to order some other part after the fact. Thanks for any information as I am looking for a solution for one man operation with a ronin m, a7sII an Loxia lens. I know I need the gear straps for the lens, but is there anything else I need? Extra plates,arms or anything for the ronin to get this set up and work, Plan on using a smallhd502 on the ronin handles. Thanks for any information.

A: Hi EricThere's a lot of ground to cover there. what I recommend is picking up the remote fingerwheel bundle without cables, and get the DJI specific cable pack:a href= http://www.bhphotovideo.com/c/product/1140914-REG/redrock_micro_8_114_0011_microremote_handheld_fingerwheel_bndle.html target= _blank http://www.bhphotovideo.com/c/product/1140914-REG/redrock_micro_8_114_0011_microremote_handheld_fingerwheel_bndle.html/aa href= http://www.bhphotovideo.com/c/product/1111304-REG/redrock_micro_8_100_0007_dji_ronin_microremote.html target= _blank http://www.bhphotovideo.com/c/product/1111304-REG/redrock_micro_8_100_0007_dji_ronin_microremote.html/afor mounting the motor, you'll want the rhino mount, probably 4 a href= http://www.bhphotovideo.com/c/product/1176779-REG/redrock_micro_2_167_0002_rhino_mount_shoe_mount_clamp.html target= _blank http://www.bhphotovideo.com/c/product/1176779-REG/redrock_micro_2_167_0002_rhino_mount_shoe_mount_clamp.html/afor lens gears, you might be best to go with a kit that covers all possible lens sizes (though loxia are typically A or B sized lens gears)a href= http://www.bhphotovideo.com/c/product/748784-REG/Redrock_Micro_8_003_0107_microLensGears_Kit_4.html target= _blank http://www.bhphotovideo.com/c/product/748784-REG/Redrock_Micro_8_003_0107_microLensGears_Kit_4.html/aFor mounting the 502 monitor, you can look at the billie ball mount as a low profile ball mount that attaches to the DJI accessory platea href= http://www.bhphotovideo.com/c/product/970766-REG/redrock_micro_2_138_0001_billie_ball_mount.html target= _blank http://www.bhphotovideo.com/c/product/970766-REG/redrock_micro_2_138_0001_billie_ball_mount.html/ahope that helps

Q: 5. Does this kit come with the needed cables? Also if I want to use this with a Movi Pro and the Freefly remote is there anything else I would need beyond this kit?

A: Depends on the Movi. We use this with our Movi M5 and Movi controller, less stuff needed for the new Movi Pro. You will probably need to order a receiver for your remote fro Freefly if it is an older Movi. They work very well but this is the bottom of the barrel for wireless focus so don't expect to film with this and sound. We produce only stock footage without audio. If I had to be recording audio this motor is pretty noisy.

Q: 6. Can this rig work with the Ronin M?

A: Yes the Redrock Micro microRemote Handheld is so compact it is designed to work on stabilizers as well as conventional set-up's.

Q: 7. I see that the basestation is wireless ready , does that mean it will connect and work with the handheld wireless remote?

A: Hi Anthony - yes that is correct. just add this hand unit (you can purchase it later) and its ready for wireless:a href= http://www.bhphotovideo.com/c/product/1014379-REG/redrock_micro_3_114_0001_microremote_handheld_wireless_focus.html target= _blank http://www.bhphotovideo.com/c/product/1014379-REG/redrock_micro_3_114_0001_microremote_handheld_wireless_focus.html/aplease note the picture of the hand unit is outdated - the new version is slimmer and smaller

Q: 8. Do I need anything else to attach this to a tripod QR plate?

A: Hi Tony - thanks for asking. I hope I understand your question correctly: The RRS QR plate attaches directly to the top of this adapter, we supply the screws. You can attach a tripod plate beneath this with the 1/4 and 3/8 holes on the bottom. so no, you don't require anything else. If we misunderstood your question or didn't answer it to your satisfaction, drop us a line at sales@redrockmicro.com and we'll help clarify.

Q: 9. When I assemble a rail systemWhich parts do you clamp a rail with?

A: Hi Hidetake,the retroFlex Cage is designed for the retroFlex handheld rig, that looks like this:a href= http://www.bhphotovideo.com/c/product/1051159-REG/redrock_micro_8_144_0001_retroflex_rig_bundle_for.html target= _blank http://www.bhphotovideo.com/c/product/1051159-REG/redrock_micro_8_144_0001_retroflex_rig_bundle_for.html/a Another option if you want to attach a rail for a focus motor or other camera-top rail-mounted accessory is a rhino mount on the top shoe clamp, which is super solid.a href= http://www.bhphotovideo.com/c/product/1176779-REG/redrock_micro_2_167_0002_rhino_mount_shoe_mount_clamp.html target= _blank http://www.bhphotovideo.com/c/product/1176779-REG/redrock_micro_2_167_0002_rhino_mount_shoe_mount_clamp.html/a hope that helps

Q: 10. How can i mount this cage on tri pod? The two 1/4 holes isn't center of lens gravity so it may cause problem when panning or moving the head it slef. Is there any part that can merge the two holes into one?

A: It's off center a bit, but I haven't had any problems with it using a standard tripod piece screwed into one hole on the bottom. I use a fairly heavy duty Manfrotto and there's no tipping issues or anything and I'm using a nice sized EFV as well. I actually really love this cage and recommend it.