You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Chrosziel Large Case For Magnum Lens Control System

Chrosziel Large Case For Magnum Lens Control System
  • Product Code: eq178591
  • Availability: In Stock

$1,722.00 $2,703.54

This Chrosziel Large Case for Magnum Lens Control Systemfrom Chrosziel Large Case for Magnum Lens Control Systemis able to hold two Magnum hand controller units, receiver, and accessories in a custom pre-cut foam interior. It features two latches, pre-formed holes for securing the contents with padlocks, a folding carry handle, and a pressure release valve.

For Two Hand Controllers, Receiver    Custom Pre-Cut Foam    Pressure Release Valve

Parameters
FoamPre-cut
Dimensions18.9 x 15.0 x 6.7" / 480 x 380 x 170 mm
Weight5.7 lb / 2.6 kg

Custom-cut foam for two hand controllers, receiver, and accessories

Built-in pressure release valve

Related Questions and Answers

Q: 1. My kit came with a strip of 3m double coated tissue tape circles, what would these be used for?

A: You can use dry-erase markers to make marks, and that way when you are pulling focus you are able to see where the focus points are.

Q: 2. is this compatible with blackmagic ursa mini G2 4.6? it will work?

A: yes this will work with the URsa mini G2

Q: 3. i have a panasonic varicam lt and want to use one of the 4 pin dc power out ports to power the motors. is it possible and if so i need a male 4pin dc power cable to male 7pin lemo correct? do you have anything?

A: the DC output on the varicam LT will not power this this motor, you will need to power it from the D-tap output of the battery plate

Q: 4. What are the interior dimensions?

A: The information we have access to tell us the following for the interior : 11.5 x 6.8 x 5.5" / 29.0 x 17.0 x 14.0 cm

Q: 5. Wired?

A: The controller included in this kit does not have a port for connecting to the follow focus motor with a physical cable therefore it can not operate as a wired solution. This is exclusively a wireless solution and it has a range of up to 1000 feet.

Q: 6. The handle to rosette adapter is too large to fit on Sachtler Aktiv8 or Benro S8 tripod head rosettes. I assume that means Sachtler and Benro are not "Arri Standard" size rosette mounts. Is there a smaller rosette to large rosette adapter or how can I attached Nucleus-M handgrips to Sachtler or Benro heads?

A: To attach the Tilta Nucleus-M Wireless Lens Control System to a tripod head, you would not be able to connect directly to the pan bar rosette. We would recommend using an item such as the CAMVATE Multipurpose Super Crab Clamp & ARRI Rosette Mount M6 Female Thread, BH #CAC2869, to mount the handgrip to a pan bar.

Q: 7. Can this be used to control the internal focus and iris motors on canon cameras using DSMC2 similar to Teradek?

A: This unit will control focus, iris and zoom through external connections to the lenses. You will need to have a manual lens that has a ring to control the iris when using this product.

Q: 8. Is there a module to use LPE6 or Sony L-Series batteries to power this entire unit?

A: I am afraid there are no modules/accessories available for these batteries.

Q: 9. Is the turn ratio adjustable?

A: If you are referring to focus throw, yes you can adjust that with the Nucleus-M.

Q: 10. can you power the handgrip and motor together daisy chain to v mount?

A: Yes, you can daisy chain the motor and handgrip with the included cables.

29/09/2024

[Pre-cut] Excellent case with moveable partitions and zippered closures.

5
17/09/2024

[5.7 lb / 2.6 kg] After trying numerous follow focus systems including ones that were from the “best” manufacturers, we still had issues getting reliability out of a wireless FIZ control system, and poor customer service even from vendors charging a very high premium for their products. Finally we tried Chroziel and not only did their magnum system work flawlessly, their customer service is great, and best of all if you are using Canon Cine Servo lenses it works natively with them so you don’t need to use as many motors for FIZ control, or depending on the lens you may not need any (i.e Canon 50-1000). This all makes for a reliable, and much more self contained system than any other on the market. I wouldn’t even consider a brand other than Chroziel for FIZ control after using the Magnum.

5
13/09/2024

[5.7 lb / 2.6 kg] The length of this bag is perfect for my SONY HDR-CX900 camcorders. I have two of the same camcorder and two of the same bag. I have had other camcorders and other bags, so it was after a lot of trials that I landed with these choices - both recommended - bag and camcorder.Extra padding comes with the bag. I use some on the side and some on top of the camcorder. I also have added some padding from other bags. If I had a wish it would be for more removable padding. When I purchased the camcorder at B&H I inquired about additional padding. The sales clerk said it was not sold separately.Apparently the bag is designed for D-SLR cameras. However, I could not find any bag that held my camcorder as well as this one.There are numerous pockets and an optional shoulder strap. The material is quite heavy.Highly recommended!

5
04/08/2024

[Pre-cut] This case is well-made and holds my optic swap system, including the lens mount with an optic lens, along with 2 sweet lenses and one edge. In addition, there is room to hold my Velvet 58mm lens. It's nice to be able to keep all of these lenses together and organized. Would recommend.

5
22/07/2024

[5.7 lb / 2.6 kg] I'm a veteran Hollywood union focus puller and a long time wireless focus user. I've been looking for an affordable, three channel alternative for some time. After using one on a short film in 2015, I decided to purchase this system from Chrosziel. I'm very happy with it so far. Chrosziel is a small company and they are dedicated to customer service. After offering a few suggestions, I saw them implemented almost immediately. The device works as a focus puller would expect. The system is compatible with a wide variety of motors and uses Lemo connectors. It is compatible with Preston motors if you already own those. I have two handsets and send control of the iris to the 2nd handset for the DP. Firmware updates are downloaded from the website and easy to install via a USB stick.

5
28/06/2024

[Pre-cut] Works as advertised with my new Canon lens(CJ series)and a legacy Canon servo grip. My only complaint was the very long wait time for the cable. Over 2 months. Hopefully the delivery time will improve for future orders.

5
14/06/2024

[5.7 lb / 2.6 kg] I must say, with all of the cables that the HDR-PJ10 comes with, and any and all of the extra's anyone may purchase, this soft travel case is the one to use! The unit itself is small enough and easy carry around. Yet large enough to hold all of the items/extras I have for the Handycam itself. A much better value in this line of carrying cases.

5
11/06/2024

[Pre-cut] I'm a veteran Hollywood union focus puller and a long time wireless focus user. I've been looking for an affordable, three channel alternative for some time. After using one on a short film in 2015, I decided to purchase this system from Chrosziel. I'm very happy with it so far. Chrosziel is a small company and they are dedicated to customer service. After offering a few suggestions, I saw them implemented almost immediately. The device works as a focus puller would expect. The system is compatible with a wide variety of motors and uses Lemo connectors. It is compatible with Preston motors if you already own those. I have two handsets and send control of the iris to the 2nd handset for the DP. Firmware updates are downloaded from the website and easy to install via a USB stick. If you purchase the option to include the zoom rocker to control the third channel, you won't be disappointed. Together with the software soft stop, performing an on camera zoom while pulling focus is easy. My favorite function of this unit are the 4 programmable user buttons. I expand my stop and focus scale often and with the programmable user buttons, I can set them, cancel them and then recall them.

5
18/04/2024

[5.7 lb / 2.6 kg] Fits the camera and all its accessories very comfortably. Light but feels very solid. Looks great like all Sony products.

5
16/04/2024

[Pre-cut] B&H very good price Beautiful, practical and well elaborated. It deserves to carry the Sony brand on it. I got LCS-U30 (for The Sony FDR-AX33 ) and I'm very happy with them.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Chrosziel Magnum 200 Wireless Lens Control Unit

$12,438.00 $17,910.72

Chrosziel Magnum Mini Wireless Focus Control

$13,377.00 $16,855.02

Chrosziel Mn-200 Wireless Lens Control System

$23,262.00 $30,240.60

Chrosziel Mn-150 Wireless Lens Control System

$18,567.00 $28,221.84

Chrosziel D-tap Power Cable For Magnum 90°

$1,005.00 $1,547.70

Chrosziel D-tap Power Cable For Magnum

$678.00 $840.72

Chrosziel Magnum 9-pin Lemo To Fujinon Cable

$822.00 $1,224.78

Chrosziel Mn-150 Magnum Extendable Transmitter

$11,523.00 $16,938.81

Products You May Like

Really Right Stuff Ta-3-lbgp Locking Knob

$210.00 $317.10

Arista Premium Liquid Film Developer 5l

$80.97 $120.65

Aluminyze Aluminum Print Kit 8x8 인쇄

$115.50 $173.25

Avenview 1x8 Hdmi 4k Uhd Splitter With Edid

$1,196.85 $1,555.90

Sony Vario-tessar T* Fe 16-35mm F/4 Lens

$2,994.00 $4,790.40

Computar 0.3x 2mp C-mount Lens For 2/3" Sensors

$2,137.38 $3,312.94