Shure Blx88 Dual-Channel Wireless Receiver H10 542-572 Mhz

Shure Blx88 Dual-channel Wireless Receiver H10 542-572 Mhz

Product Code: eq178605
Availability: In Stock

$867.00 $1,213.80

Qty

20 reviews Write a review

Description
Reviews (20)

The Shure BLX88 Dual-Channel Wireless Receiver H10 542-572 MHzis a dual-channel tabletop wireless receiver compatible with two BLX1 bodypack or BLX2 handheld transmitters. Compact and lightweight, it houses internal antennas, and is ideal for portable use.

The BLX88 features one-touch QuickScan frequency selection to quickly search 123 available frequencies and locate a clean RF channel in case of interference. It employs microprocessor-controlled diversity technology to reduce dropouts. BLX systems allow up to 12 mic channels to operate simultaneously in each frequency band, at a range up to 300'.

Located on the front panel, two LED displays show the RF frequency groups and channels, while four LED status indicators inform you when the system is ready to operate and alert you if your audio is clipping. The receiver offers two 1/4" and two XLR outputs for connectivity to PA systems and mixing boards.

For Small Venues and Conference Rooms Dual-Channel, Portable Tabletop Design Internal Antenna Diversity 123 Auto-Scan Frequencies Expandable to 12 Mic Channels/300' Range

Key Specs
Wireless Technology	Analog UHF
Diversity	Antenna Diversity
Max Operating Range	300' / 91.4 m
Receiver Type	Tabletop
Number of Audio Channels	2
Audio I/O	2x XLR 3-Pin Male Balanced Output 2x 1/4" TS Female Unbalanced Output
Network I/O	No
Power Requirements	AC/DC Power Adapter
Parameters
Number of RF Channel Frequencies	123
Diversity	Antenna Diversity
RF Frequency Band	H10: 542 to 572 MHz
RF Bandwidth	24 MHz
RF Channel Scanning	Auto-Scan
Max Operating Range	300' / 91.4 m
Max Transmitters per Band	12
Timecode Support	No
Mobile App Compatible	No
Receiver
Receiver Type	Tabletop
Mounting Options	Tabletop (with Included Hardware)
Antenna	2x Internal, Fixed
Number of Audio Channels	2
Built-In Microphone	No
Audio I/O	2x XLR 3-Pin Male Balanced Output 2x 1/4" TS Female Unbalanced Output
Audio Output Level	XLR Outputs: -27 dBV (Mic Level) 1/4" Outputs: -13 dBV (Instrument Level)
Frequency Response	50 Hz to 15 kHz
Network I/O	No
Network Protocols	No
USB Class-Compliant	No USB Connectivity
Standalone Audio Interface Capable	No
Impedance	XLR Outputs: 200 Ohms 1/4" Outputs: 50 Ohms
Approximate RF Sensitivity	-105 dBm
Adjacent Channel Isolation	>50 dB
Power Requirements	AC/DC Power Adapter
AC/DC Power Adapter	12 to 15 VDC at 160 mA, Center-Positive (Included)
Display & Indicators	1x Multi-Segment LED (Channel, Group) 2x LED (AF Level, Sync)
Housing	ABS
Operating Temperature	0 to 135°F / -17 to 57°C
Dimensions	7.4 x 1.6 x 4.1" / 188 x 40 x 103 mm
Weight	15.1 oz / 429 g
Packaging Info
Package Weight	3.85 lb
Box Dimensions (LxWxH)	19.1 x 16.2 x 3.6"

Related Questions and Answers

Q: 1. Will the URX-S03D UWP-D work with the older Sony UTX-B03 Bodypack Transmitter?

A: Yes, as long as the receiver and transmitter both operate within the same frequency band.

Q: 2. Can the Sony URX-P41D be paired with a Lectrosonics LMb transmitter with the same frequency range?

A: No, a Sony URX-P41D Dual-Channel Camera-Mount Wireless Receiver will not work with a Lectrosonics transmitter.

Q: 3. Would this receiver work with a Sennhesier SK500 transmitter in thr Aw+ band (470-558Mhz)?

A: No it would not work with Sennheiser transmitters. It can be used to capture audio when paired with the SONY UTX-B03HR beltpack transmitter & microphone (sold separately)

Q: 4. Will the URX-S03D fit into the PXW-X320 XDCAM? if so, do you need a mounting adapter? thx

A: Based on Sony's website, this device should fit right into the PXW-X320's slot without any additional adapters.

Q: 5. Is this compatible with the Sony DWT-B01 Digital Wireless transmitters?

A: No, components from Sony's UWP-D line such as the Sony URX-S03D UWP-D Dual-Channel Slot-In Wireless Receiver are not compatible for use with components from Sony's DWX line such as the Sony DWT-B01 Digital Wireless Bodypack Transmitter.

Q: 6. I am interested in purchasing this wireless microphone but am unsure what frequency to purchase. I live in Los Angeles, is there a preferred frequency for my region of the USA?

A: Because the Sony URX-P41D Dual-Channel Camera-Mount Wireless Receiver offers the ability to auto-scan it's 2,772 potential frequencies, it should allow you to find an open channel in virtually all areas in any of the three available bands. Frequency availability across bands could also change depending on your location within the greater Los Angeles area. In general, it appears that the UC14: 470 to 542 MHz band may offer the most access to open channels in Los Angeles out of the three available frequency bands.

Q: 7. Can a Sony UTX-P40 Wireless Plug-On Transmitter (UC14: 470 to 542 MHz) be used with this receiver? Or a Sony UTX-B03 Bodypack Transmitter - same freq. channels?

A: Yes, as long as the transmitter and receiver are the same series and same frequency band.

Q: 8. What alternatives do i have to power this unit when in a sound bag?

A: The Sony URX-S03D UWP-D Dual-Channel Slot-In Wireless Receiver requires 7V DC 200mA from a camcorder or wireless power adapter such as the Sony DWA-F01D Digital Wireless Adapter (B&H # SODWAF01D). For mixer-bag use with battery systems, centralized management for the DWA-F01D can be achieved using the Hirose 4-pin or BP jack. For AC powering, you can use an InfoLITHIUM battery charger as an AC adapter or use a conventional AC adapter with the BP jack.

Q: 9. Battery Type-4 is not described in your manual or anywhere on the web. What type of battery is type4?

A: Page 34 in the manual for the Sony URX-P41D Dual-Channel Camera-Mount Wireless Receiver (UC14: 470 to 542 MHz) describes Type 4 as a 2500mAH AA battery like BH #WAAAALAX8 for example. https://www.bhphotovideo.com/lit_files/833188.pdf

Q: 10. Does this work for both channels in a Sony X400 camera?

A: Hi Tom, Yes. Thanks, Erin

Alfonso	16/09/2024
[123] I BOUGHT TWO SYSTEMS. THEY PERFORMED REALLY WELL. LOVE SHURE EQUIPMENT. 5

First Lutheran	13/09/2024
[-105 dBm] Easy to set up. Very compact and fits in with the other two I have. Match it with the Shure mics and you have a winner 5

Kenneth	07/09/2024
[Tabletop] I got these for a Sunday school class so those participating via live streaming could hear class member's responses to questions posed by the class leader. We also hooked the system up to the local PA system so people in the class could hear better too. The scanning feature found good, distortion free frequencies quickly and we had minimal issues with feedback even though the mics were used in front of the speakers. I considered going with the Beta 58 mics, but these are only being used for speaking and worked just fine for a lot less. 5

Matthew	23/08/2024
[Tabletop] Needed handheld microphones for Christmas concert, knew B&H could deliver on time, found exactly what we needed. Love having go-to supplier for our needs! 5

Michael	04/08/2024
[Analog UHF ] I now have (6) of these microphones. I'm very pleased with the sound quality from them. 5

Quy	03/08/2024
[Tabletop] Good connection with clear audio. Recommend this brand. 5

Bob	03/08/2024
[24 MHz] FINE SERVICE, GOOD PRICE, FAST SHIPPING 5

Yitzi	27/07/2024
[123] i used it and it works very clearly 5

John	17/07/2024
[12] This is a Great product. We Had another wireless systems that had come recommend to our church. But all we had was issue after issue. Even sent it back 3 times to the Manufacture. So we decided to purchase this item and we couldn't be happier it works as advertised and clear vocals with no feed back. 5

William B.	26/06/2024
[Analog UHF ] Great high quality mics, with two independent receivers in a single package it's a great way to get two high quality wireless mics with only one power connector. I tried using a single unit rack mount with four receivers as a space effective solution for wireless mics but unfortunately that didn't work well in my space, so I upgraded to this system. Only two mics instead of four and not a rack mount, but still a good compact solution with MUCH higher quality mics. Receiver is only slightly larger than a single unit receiver. Each unit has independently programmable group and channel, as well as output. But only one power cable needed. It might be nice if there were a combined output connection rather than treating each mic as a separate input to the mixer, but that's a minor issue given the overall high quality of the system. 5