Argosy G22 Desk For Avid S3, Dual 9 Ru Racks, Black Finish

Product Code: eq178841
Availability: In Stock

$11,609.97 $15,209.06

Qty

14 reviews Write a review

Description
Reviews (14)

The black G22 Desk with Dual 9 RU Racks from Argosy accommodates the Avid S3 Workstation and offers you an unobstructed line of sight and line of sound while putting every essential control at your fingertips. Elevated chassis provides transparency to low frequencies, while the pitched surface and perforated grills foil early sound reflection and avoid build-up of standing waves. Its steel chassis rail and gunmetal gray legs support 19 to 32mm powder-coated MDF components to support your studio equipment.

Key Specs
Rack Form Factor	2x 9 RU (Front) 1x 4 RU (Rear)
Desk
Rack Form Factor	2x 9 RU (Front) 1x 4 RU (Rear)
Dimensions	73.7 x 45 x 33.2" / 187 x 114 x 84 cm

Padded armrest

Precision fit and finish

Powder-coated components

Mesh grill to protect cabling

Steel chassis rails & legs

4 RU center rear mounted rack rail for additional equipment & power supplies

Related Questions and Answers

Q: 1. Does one have to press the 'pair' button on the receiver to pair a device? This would be installed at a school, so I want to make sure no one can pair a device without having physical access to the receiver.

A: Yes, you do have to press the pair button in order to connect a device to it.

Q: 2. Does this slider require the motor and belt to be taken off the slider in order to put it in the case?

A: Yes, it does require for product to be in proper slots.

Q: 3. Is this unit suitable for live band/gigging applications?

A: Hi! Happy to help! Bluetooth is not typically used for live performance settings due to its inherent latency and lower quality, however the DN-300BR could potentially be utilized for backing tracks with the right arrangement.

Q: 4. My Bluetooth antenna is broke... and I need to buy a spare antenna ! Do you sell it?

A: Unfortunately we do not. You might want to contact the manufacturer.

Q: 5. What is the maximum camera and lens weight the slider can handle to operate smoothly?

A: The Konova P1 Carbon Slider with KMS-S3 Wireless Motorized System has a support weight of up to 17lb payload weight to operate. You would want to be under this weight to have it run smoothly. horizontal payload: 8kg (17lbs), diagonal payload: 3kg (6.6lbs), vertical payload: 1kg (2.2lbs).

Q: 6. I read that the system will support 10 lbs. Will it safely support two Sony a1 cameras with 70-200mm and a 200-600mm lenses mounted?

A: The ProMediaGear Dual Camera Holster System (Black) can support those two cameras and lenses, but it may be uncomfortable to carry them around your waist.

Q: 7. ARE THE 2 MONITOR ARMS AND STUDIO SPEAKER ARMS INCLUDED?

A: No, included In the Bo, with this Forecast Consoles GC1-MR Imagemaster Edit Console (Graphite Nebula Laminate Top Finish), would be the following/ Forecast Consoles GC1-MR Imagemaster Edit Console (Graphite Nebula Laminate Top Finish) Countertop Left Leg Assembly Right Leg Assembly Modesty Panel Assembly 4 x Cam Lock 4 x Cam Lock Pin Limited 1-Year Warranty

Q: 8. Is there a memory feature for this slider?

A: No, there are no memory features listed for this slider.

Q: 9. I would be purchasing two of these and they would have about 20 feet between them. Can you name the device (instead of a default) so that our users can choose the correct device? They are for two fitness studios.

A: The name of this device cannot be edited. They will both appear as 300BR.

Q: 10. What determines the Maxim distance for these units?

A: The maximum distance has to do with the version of Bluetooth that is employed, in this case it is 4.0 and the range is 100'. Physical impediments and strong WiFi signals will decrease the distance.

Victor	24/09/2024
I am enjoying the desk. The shape is great and the quality is high. 5

Christopher	21/08/2024
This under desk rack is a great value when compared to other racks of the same type and size. I have the 2 ru variant, which was enough to to mound my tesira forte under my desk. It comes with all the hard ware you need to install it under a desk. The screws that come with it will only work with a 1 inch table top or larger. If you desk is just shy of that I recommend using smaller screws or putting washers in as a buffer. In my case my desk had a 7/8ths inch thickness so I used screws that were not supplied with the kit and some washers to ensure that the screws would not pierce the other side. TLDR: it's great if desk thickness is less than an inch use washers and/or smaller screws. I rate it a 10/10. 5

esstek	12/08/2024
This is a very well made shelf for items that can weigh up to 250lbs. It is adjustable for mounting depths of 26.5 inches to 32.5 inches. Yes, you can find cheaper shelves, but do you really want to have them falling apart after you place something that weighs this much on them? Better to buy quality and be safe! 5

Jorge	08/08/2024
Sturdy drawer and great quality 5

Tim	19/07/2024
Building a home studio requires customization at every turn. My personal space is used for both sound recording a “live” room, and post mix as well as a work station for video editing. This desk provides me with the work space in need for both, organized and All components at my fingertips. I can effortlessly transition between my projects and process and have this desk to thank for that professional and creative look and feel of my space. The quality of the build is outstanding. The directions were clear and organized The only draw back with this process was waiting on final confirmation of shipping from manufacturer to ensure I was home to receive. Highly recommend. 5

Allen	28/06/2024
Mounted two 4ru racks under the rear shelf of my DIY home studio recording desk. Perfect fit. 5

V Robert	21/06/2024
Well designed, easy to install. 5

Jennifer	01/06/2024
This was perfect for the underside of a shelf on my desk. I could add the rack space without a large space hogging rack case. 5

Peter	29/05/2024
Pleasantly surprised by the quality and compact design, lightweight without being flimsy. It came with a full range of mounting hardware (screws, anchor lag bolts) as well as rackmount clippy nuts and screws. I am currently using it as a standing desktop mini-rack. 5

Ezra	08/05/2024
This is a direct replacement for an Avid S3 fader. Very simple to replace, though it didn't include any documentation. Take the cap off the bad fader and remove the 2 screws holding it in. Turn the S3 over Be especially careful when you turn the S3 over to access the rear plate. I folded a clean bath towel over several times and gently placed it on to work on. Unscrew and remove the bottom plate, you may need to pry the plate slightly with a thin tool, take out the loose fader, gently unplug it, plug the new one in. I recommend screwing it in from the top before you replace the bottom plate. then reverse disassembly. When you power it up it the new fader should now be working. 5