BOZ Digital Mongoose Stereo to Mono Summing Plug-In Downloadfrom BOZ Digital Mongoose Stereo to Mono Summing Plug-In Downloadis a plug-in for tightening the bottom end of mix when the relevant tracks have been recorded in stereo. While stereo tracking can be very beneficial when it comes to higher frequencies, large stereo spreads for lower frequencies can sound unnatural and result in weaker bass.

The software takes all the wide, low frequencies and puts them right in the middle of the stereo field, which results in a low end that translates better to headphones and 2.1 systems. The plug-in is easy to use, requiring only an adjustment of the crossover frequency, where everything below that point is summed to mono. Additionally, the width of the stereo image can be adjusted using dedicated low and high width-knobs.

Collapse Bass Frequencies to Mono    Solidify the Low End    Adjustable Crossover Frequency    Low and High Frequencies Solo Switches    Master Bypass Switch    Easy to Use    AAX Native, Audio Units, RTAS, VST, VST3    Mac OS X, Windows

Related Questions and Answers

Q: 1. are you able to tilt the microphone up or down at all?

A: No -the microphone is in a fixed positon when mounted on a bracket or in the camera's shoe.

Q: 2. How long will the batter last? How many hours?

A: The Sennheiser AVX EKP Camera-Mount Digital Plug-In Receiver (1.9 GHz) has an estimated running time of 4 hours on a full battery charge.

Q: 3. Can you use a turntable with Antelope Satori?

A: Unfortunately the Satori is not made to take a turntable. There are no phono pres just mic and line inputs.

Q: 4. Will this fit an Audio Technica 822?

A: It will not. The AT822 has a 2.44 Head Width.

Q: 5. Can I use this mic with my computer? I have an iMac and want to use it with my screen recording software to create tutorials. I purchased the audio jack to USBC cable to connect to my computer, but the computer isn't recognizing it.

A: You need to go TRRS into the computer for your computer to be able to see it through the mini to USB-C adapter that you are using. So you can either use the Rode SC4 adapter with the cable that was included with your SMX-30V microphone, or you can use the Rode SC7 cable as a replacement to go from the microphone into the adapter that you have connected to your computer.

Q: 6. Can this be charged/powered by a regulated Dtap to microUSB cable (5v) like this one? GyroVu D-Tap to Micro-USB Regulated Adapter Cable (30")

A: Yes, that particular Dtap cable should work for charging the BA20 battery.

Q: 7. I video marching bands from press boxes, maybe 200 feet or more from the band. Is this a decent microphone to use? I'm looking to improve sound recorded using my Panasonic HDC-TM900 (older) video camera.

A: yes I feel that it would . During warm= ups I would switch through the settings mono/stereo but I would think stereo would be a good choice during the performance

Q: 8. Will this fit the new MV88+ microphone by Shure?

A: Yes it will

Q: 9. Does this microphone work with Canon Vixia Camcorders?

A: Just check the camera or the manual to see if it does have a microphone input. Not all Vixia models have microphone inputs. If it does have a microphone input, then the SMX-30 is compatible. You may also want to check if the camera has a cold shoe slot to mount the microphone. If not, you may want to look into alternative mounting solutions.

Q: 10. I have receptor trouble wont let me pair if i press the pair button all the green leds turn on and then it shut off it self, any idea about the problem? Thanks

A: In order to assist you it would be helpful to know which transmitter you are using with the AVX EKP receiver. There are two options -- the Sennheiser SK AVX Digital Bodypack Transmitter - 1.9 GHz (B&H # SESKAVX4) and Sennheiser SKM AVX-835S Digital Handheld Microphone Transmitter - 1.9 GHz (B&H # SESKMAVX8354). The receiver and transmitter must both be powered on and within line of sight of each other in order to pair them. The transmitter and receiver need to be within close proximity and able to "see" each other during setup. Please be aware that other Sennheiser transmitters like those from the Evolution series or the XS series (which operate on the UHF band) or XSW-D series (which operates on the 2.4 GHz band) are not compatible for use with the AVX series receiver. Please contact us by phone or through live chat on the website if you have additional questions or if you would like further assistance to troubleshoot the problem.