The Fiberbilt PP3x10 Padded Partition is a divider used to provide additional adjustable space for a Case Design Fiberbilt 5 or 6" deep Adapt-A-Case. It is an interlocking divider made from 1/8" Masonite with foam padding.

Adjustable space to fit your equipment

Interlocking, foam-padded partitions

Padded side walls

• Case Design Fiberbilt P20B, P20E, P40L, P40XL, P70M or P70R Adapt-A-Case

Related Questions and Answers

Q: 1. Will this hold the VidPro TT-76 (26 inches long)?

A: The interior of this bag is only 25.5 inches so the TT-76 will not fit.

Q: 2. What colour is the insert? Is it black or gray?

A: These dividers are gray.

Q: 3. One reviewer said it had 1/4 padding. Some others said it had very thin padding and at least one reviewer said it had no padding. So how much padding does it have?

A: The padding is very thin between 1/16 and 1/8 inch. Definately, not a quarter inch. No padding is not right either.

Q: 4. What length of bag do I need for Manfrotto 055 + Acratech GP ballhead attached?

A: When I bought my bag I measured my tripod to establish which size I needed.

Q: 5. Are the dividers as picture on your website, or are they fabric with the red straps as is pictured on the Nanuk website for the same item?

A: The dividers are exactly like the photo on the B&H website.

Q: 6. Can I use this divider to transfer from my CASE to a Nanuk BAG? like the 18L, 30L or 35L? if so, which one ?

A: Unfortunately the Nanuk backpacks are not made to be used with inserts.

Q: 7. How many mounted competition prints can fit in this (depth-wise)?

A: It really depends on the thickness of the board you are mounting the prints to. The case is three inches deep. So best is to figure out which board you are mounting the prints to and see how many can fit in three inches.An example is 4 ply board on an average is about .0610 thick. If you are not matting the prints but just putting the prints on board, divide .0610 inches in to 3 inches. And that is about 49 prints. But the print has thickness so that is just approximate and only if you use 4 ply board.

Q: 8. What are exact exterior dimensions? Need to calculate whether or not this case will get hit with airlines Oversize Checked Bag Fee for exceeding 62 inches (L+W+H).

A: According to the manufacturer the shipping dimensions of the case are 45 x 11 x 12 = 68 . So yes, prepare to pay.

Q: 9. What are the internal measurements?

A: Fiberbilt by Case Design P50 Versatile Mount and Print Shipping Cases 11 x 14", 2.0" Deep has internal dimensions of 11x14x2 inches.

Q: 10. How big is the exterior pocket? Will it accommodate the Manfrotto 322RC2 grip action ball head? It's about 9 long by 3.5 in diameter at the widest point.

A: The useable pocket space is about 5 3/8 (zipper down to pocket bottom) x 8 3/4 (across inner side seams) - the pocket itself being bit larger. My tripod fits well into the bag but does not allow much give to the pocket depth. Hope this helps. Pleased with quality of the bag.