Turbosound Nuq122-An 2500W 12" Powered Loudspeaker

Turbosound Nuq122-an 2500w 12" Powered Loudspeaker

Product Code: eq179080
Availability: In Stock

$3,597.00 $4,424.31

Qty

11 reviews Write a review

Description
Reviews (11)

The white NuQ122-AN 2500W 2-Way 12" Full-Range Powered Loudspeaker from Turbosound is ideally suited for a wide range of portable and fixed installation speech and music sound-reinforcement applications. Designed to work individually without a controller, the NuQ122-AN Loudspeaker provides optimal performance for FOH, sidefill, and delay-line loudspeakers, and is an ideal choice for wedge-monitoring applications. It also offers the flexibility to accommodate venue-specific requirements for install applications.

The NuQ122-AN Loudspeaker features a 12" low-frequency driver with a low-mass voice coil for improved transient response and an aluminum dome with 1" neodymium high-frequency compression driver, which is mounted on a rotatable 70° horizontal by 70° vertical-dispersion converging-elliptical waveguide. Output power for the NuQ122-AN Loudspeaker is provided by means of an efficient and lightweight KLARK TEKNIK 2500W Class-D power amplifier. An easy-to-use KLARK TEKNIK Digital Signal Processor (DSP) provides dynamic EQ for impressive full-range response at low volume levels and transparent limiting for clarity at high-output levels as well as for long-term reliability.

On the rear panel of the amplifier module, the user interface’s LCD display and single rotary encoder provide intuitive access to position compensation, user EQ control, subwoofer integration, and signal-routing features. In addition to the balanced XLR input, an XLR output is provided for daisy-chaining more active loudspeakers or for use with active subwoofers. An onboard USB port provides access for remote control of the NuQ122-AN Loudspeaker via PC computer, as well as DSP firmware updates.

ULTRANET connectivity is provided by two locking etherCON connectors. Up to 16 independent channels of 24-bit digital audio and control data are transmitted via a single Cat5 cable between compatible digital devices including mixers, input/output stage boxes, powered loudspeakers and personal monitoring systems. Simplified cable routing and ease of setup translate directly into significant time saved during installation.

Finished in a highly durable semi-matte white paint, the trapezoidal cabinet is constructed from 15mm birch plywood, and includes a rugged powder-coated perforated steel-mesh grille. Multiple threaded rigging points are provided for suspension in any orientation. The NuQ122-AN Loudspeaker also features a 35mm socket for standard pole mounting plus integrated handles for convenient transport. Mains power input is provided via a Neutrik powerCON connector.

System
Frequency Response	55 Hz to 18 kHz (±3 dB) 50 Hz to 20 kHz (-10 dB)
Nominal Dispersion	70° H x 70° V @ -6 dB points
Maximum SPL	131 dB peak
Crossover Type	Active
Transducer	1 x 12" ( 315.5) LF driver 1 x 1" (25.4 mm) HF compression driver
Limiter	Independent HF, LF, peak and rms
Amplifier
Maximum Output Power	2500 W
Type	Class-D
Protection	Short circuit, thermal
Connectors
Input/Output	1 x Combo Jack / XLR 1 x XLR
Sensitivity	+4 dBu or +14 dBu software switchable
Input Impedance	40 kOhms; balanced
Maximum Input Level	+22 dBu
Connectivity (RJ-45)	2 x RJ45
Mains Supply	Neutrik powerCON 20 A
DSP
DSP	Rotary push-encoder and level control Buttons for Process, Setup, Exit, Enter
Display	LCD 128 x 32, blue, backlit
Delay	0 to 300 ms
Equalization	High- and low-shelving EQ 2 x parametric EQ Presets: Positioning, Sound mode, FBQ
Limiter	Zero attack input limiter
Presets	20 total presets, 19 user-defi nable
Crossover	High Pass L-R 24 dB/oct
Protection	Lock-out function for all settings
Connectivity
Processing	24-bit, 44.1/48 kHz sample rate (digital)
Converter Type	24-bit, delta-sigma
System	Signal 16 channels Latency < 0.9 ms Frequency response 20 Hz to 20 kHz (+0 / -3 dB) Dynamic range typical 92 dB
Cabling	Shielded Cat5 Maximum 246 ft / 75 m (recommended)
Power Supply
Power Consumption	90 W @ 1/8 max power
Voltage	120 V, 60 Hz (T 15 Ah 250 V)
Construction	0.6" (15 mm) birch plywood
Grille	Powder-coated perforated steel
Dimensions	25.8 x 14.7 x 13.4" (65.6 x 37.4 x 34.0 cm)
Weight	44.5 lb (20.2 kg)

2-way full-range powered loudspeaker for portable PA applications

2500W power featuring KLARK TEKNIK Class-D technology for total system control

ULTRANET digital-audio networking connects to mixers and other sources

12" low-frequency driver with low-mass voice coil for improved transient response

Aluminum dome with 1" neodymium motor-compression driver

Low-distortion waveguide provides 70° H x 70° V dispersion

Fully featured user interface with LCD display for ease of navigation

PC remote control software downloadable

15mm birch plywood enclosure with hard-wearing semi-matte white paint finish

Rugged powder-coated perforated steel-mesh grille

Integral 35mm pole mount and handles

Multiple internal rigging points allow bracket mount and suspension in any orientation

Mains input on Neutrik powerCON connector

Related Questions and Answers

Q: 1. The thickness of the battery case i use on my phone is about 11/16 in. (17mm). Will the jaws on this mount accommodate that?

A: The OBSBOT Me AI-Powered Selfie Smartphone Mount BH #OBME will support up to 0.4" in thickness.

Q: 2. Based on Reviews here,there is no Trigger for Canon. How do i trigger the honey badger for Canon R5 when using ETTL mode?

A: To send passive TTL info the following commander is needed. Interfit TTL-C Remote for Canon BH #INRS1C • MFR #INTR1C https://bhpho.to/3MOm2Vi

Q: 3. Can I connect a PocketWizard to this?

A: Yes. The Siros L has a sync port which can be triggered by a plugged in receiver.

Q: 4. Is the wireless receiver compatible with Pocket Wizard Transceivers?

A: Rather than using the Badger Unleashed's built-in proprietary receiver, you'll use a Pocket Wizard as a receiver and plug it into the Badger Unleashed's 3.5mm sync port. To be clear, any wireless transmitter and receiver set (e.g. Vello, Godox, Yongnuo, etc.) with a sync port output could be used in that way, too. The advantage to using Interfit's own remotes is that the Interfit remote will also give you control over the flash intensity from the transmitter. (Of course, you can always push the buttons on the strobe to adjust intensity otherwise.) To locate an Interfit proprietary radio transmitter (which they call a "remote") for this strobe, please click the [ACCESSORIES] button below and then [Radio Triggers & Receivers ]. If one isn't listed for your camera brand (e.g. Fujifilm or Panasonic) then choose the manual remote for all cameras (B&H #INTR1B), which will still allow for control over the flash intensity from the transmitter.

Q: 5. What cable would I require to connect this flash to a PC Sync Copal Shutter?

A: You need to get a 3.5mm to standard pc cable - Impact Sync Cord Male Mini (3.5mm) to Male PC (16') BH #IMMMPCM16

Q: 6. Based on reviews, there's no trigger for canon. Using Canon R5 & Honey badgers, what are my options to trigger flash ETTL?

A: The only option available at the given moment is a all manual trigger the TTL model has been discontinued by manufacture. Manual trigger Interfit S1 Manual Remote for all Cameras BH #INTR1B • MFR #INTR1B https://www.bhphotovideo.com/c/product/1347248-REG/interfit_intr1b_manual_remote_for_all.html TTL Interfit TTL-C Remote for Canon BH #INRS1C • MFR #INTR1C https://www.bhphotovideo.com/c/product/1191179-REG/interfit_intr1c_ttl_c_remote_for_canon.html

Q: 7. Does this work with an Olympus OMD em10 ii?

A: You can use the Interfit S1 Manual Remote for all Cameras, B&H # INTR1B to connect the OM-D E-M10 II for manual control only. https://bhpho.to/2EOSYZI

Q: 8. Is the modeling lamp proportional to the flash power? I mean is it possible to adjust it and make it proportional?

A: The Siros L LED modeling lamp is a fixed power output and cannot be dimmed to be proportional with its flash power setting.

Q: 9. Is this enough to light a 120 x 180 cm Softbox?

A: Yes. More than enough power to illuminate a 120x180 cm.

Q: 10. will ir work with a Godox XProS TTL Wireless Flash Trigger for Sony Cameras?

A: The flash head has a built-in 15-channel receiver that supports TTL using a separately purchased transmitter for Nikon, Canon, or Sony, as well as High Speed Sync with shutter speeds as short as 1/8000 sec to control the background light level. Interfit TTL-S Remote for Sony B&H # INRS1S: https://bhpho.to/2TXRTWb

Tony	23/09/2024
[2500 W] I’m very happy to own these speakers. I’ve done several events with just the Bluetooth capabilities. Not only can you stream your music but also control all your audio sounds levels with app and to top it off, you can pair 2 speakers to run in stereo via Bluetooth. I have controlled my music, mics and speakers wirelessly from my iPhone/iPad. I’ve gotten a ton of compliments on sound and it never fails that someone will come up to me to ask what brand speakers I’m using. Turbosound is not a well known commercial brand but don’t let that fool you. These provide excellent bass and mid/high sound. My only con is the weight but the sound will make you forget about that. For all the features ,well built and durability , they are well worth the price , seriously. 5

South Tampa	21/09/2024
[131 dB peak] Purchased a pair of these with all custom bags. Replacing my 'standard' sound system of Mackie SWA 18"+ SRM 12" 2-way system. Absolutely loved using them and happy i upgraded. Operation: I clocked myself at 46 seconds to disassemble the entire column and put all components in the cases/bags including sub. I can carry the sub though its not very mobile friendly without dolly. Erects in similar amount of time and much easier on the eyes. Audio: Compared them with Bose, EV, RCF, and Fender. Out of the group the RCF was the best sounding overall. The Turbosounds sounded better than the rest but the dual 12" sub did outperform the single sub on the RCF 12, at least for me. Aesthetically it was nicer than the RCF but the EV evolve looked the nicest and was the easiest to transport. Would highly recommend. Happy to have joined the Turbosound family. 5

Adrian	25/08/2024
[Active] I bought this speaker for to use in my car to blast music everywhere I go. It gets the job done and it’s pretty loud but you are also able to link 2 of them together for some real fun!!!! Speaking of which I’ll probably go buy another one soon. PS: no it’s not rechargeable I just have a power supply. 5

Rob	13/07/2024
[131 dB peak] One 18 will do great with two powered tops. Nice deep powerfull bass without resonance problems. In the US maybe not wel known, but is worth to try it. I had a group of 250p that had a wonderfull evening. Our EV zlx 15bt tops combined fine. 5

Greg	06/06/2024
[0 to 300 ms] Great speakers for any occasion. I purchased the 12 version since the price was lower and specs are the same for the 15 set. Durable, multiple handles make them easy to carry, set-up and take down. The pole mount has a set-screw to ensure the speaker doesn't spin once mounted on the stand. 5

Anonymous	22/05/2024
[Active] We bought this Srm450 because we had one of the earlier models we used to send piano to the cast on stage because they couldn't hear it from the pit and were very pleased with it and its trouble free use.� Our new theater made it necessary for the orchestra pit to be off stage behind the cast and we used this one on a loop from one of the main speakers so the orchestra, and most importantly the conductor, could� hear the singers.� We had clean, accurate sound reproduction, and all went well. 5

Carlos	04/05/2024
[Active] I usually don't write reviews but I have to do so for this speaker.I have own few PA speakers mackie thump and others,this beast has no comparison this very powerful with excellent base I haven't connected it yet to my mixer that definitely will increase sound but so far I don't have I'm completely satisfied with this amazing sound wow.I will definitely get another one I can't wait to hear 2 of this beast sound together. Also B&H is class A received this speakers very fast delivery 5

Alex	17/04/2024
[2500 W] Great full range sound. It has more bass than I expected. These will now by my main speakers for events. 5

Adrian	11/04/2024
[2 x RJ45] These things are incredible. By themselves they are great but with subs this system will rip. Equally at home as a stage wedge or on a speaker stand. Currently, have 2 set up with 4 JBL MPro subs. The subs run out of headroom way before the tops. The built in DSP is nice. I don't much care for the presets on it but having the ability to bypass that and have full manual control is amazing. Well worth the price tag. They are not light but I would much rather a plywood box than a plastic box so the weight is something I will gladly deal with. 5

Kurt	07/04/2024
[Class-D] Bought the speakers for a large group (60+ people) and had plenty of volume for PA and background music. The mic anti-feedback thing didn't work that well, but I was using a separate mixer and two speakers run separate. They crank up fine and have some good base. If you love base and want your chest to pound, these are not for you. Go with 15 instead. I would say they are on the low side of 1000W, but plenty to have the neighbors call the cops. 5