You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Altman Pegasus 8 4000k Led Fresnel Light

Altman Pegasus 8 4000k Led Fresnel Light
  • Product Code: eq179092
  • Availability: In Stock

$5,177.25 $6,730.43

The Altman Pegasus 8 4000K LED Fresnel Lightis a 4000K, white-output LED Fresnel with a 8" lens housed in a white enclosure, capable of operation in both mains dimmable and DMX systems. The fixture uses a 120W lamp and casts soft light similar to that produced by theatrical and studio Fresnels, achieving an output equivalent to that of a 750W incandescent fixture.

The Pegasus 8 is designed to seamlessly integrate into preexisting dimmer systems. When the unit is set to Mains Dim Control, it can plug directly into theatrical phase-cut dimmers and functions in both forward- and reverse-phase implementations, replicating the smooth dimming curves of similar incandescent fixtures. The fixture is designed to operate on both 120V and 230V dimming systems, with a voltage selector switch on the rear of the unit. This switch just applies to the operating voltage of the dimming system. The fixture itself has a universal, auto-sensing power supply capable of functioning between 120 and 240 VAC.

The fixture is also fully RDM (Remote Device Management) and DMX compliant. This allows for its use in a lighting system that uses both constant power (for phase-cut dimming) and DMX data control. Simply flip the DMX/Mains Dim switch on the rear of the Pegasus 8 to convert it into a DMX/RDM controllable unit.

It can be used with standard theatrical gels as well as with gels formulated for LEDs. The fixture is constructed entirely from metal and is made in the USA. It ships with a C-clamp, a color frame, a safety cable, and a powerCON power cable.

Lamp Wattage of 130W    Mains Dimmable or DMX Controlled    RDM Compliant    PowerCON and DMX In/Thru Connections    Variable Beam Angle: 10 to 50 Degrees    Beam Adjustment Knob    High-Resolution Digital Dimming    Fully Homogenized Beam    Life Expectancy of 50,000 Hours    Made in the USA

Parameters
Light Source1 x 130 W Fixed White LED
LED Life ExpectancyUp to 50,000 Hours
Beam Angle10 to 50 Degrees (Manual Adjustment)
Color Temperature4000 K
CRI>90
DimmingMains Dim (Forward- and Reverse-Phase)
DMX/RDM
IlluminanceSpot 10° Beam Angle @ 5' / 1.5 m: 18,399 Lux (1710 fc)
Medium 35° Beam Angle @ 5' / 1.5 m: 7359 Lux (684 fc)
Wide 50° Beam Angle @ 5' / 1.5 m: 3593 Lux (334 fc)
Lumens>11,620
ProtocolsDMX512 and RDM
DMX Connectors1 x 5-Pin XLR, DMX Input
1 x 5-Pin XLR, DMX Output
Display/Controls3-Digit Display with 3-Button DMX Control System
Input Voltage115 - 230 VAC, 50 - 60 Hz (Auto-Sensing), 1.2 A
Current Draw1.01 A @ 120 VAC
0.50 A @ 240 VAC
Power Consumption130 W
Power Connectors1 x powerCON Input (20 A @ 120 VAC, 15 A @ 230 VAC)
1 x powerCON Output (18 A @ 230 VAC, 13 A @ 230 VAC)
Power Cord Daisy ChainYes
Approvals and RatingsETL, cETL & CE Pending
Ambient Temperature32 to 104°F / 0 to 40°C
BTU/h425.5
CoolingSilent Active Cooling: <19 dBA @ 1.6' / 0.5 m
ConstructionAll Metal with Corrosion-Resistant Materials and Hardware
Housing ColorWhite
DimensionsFixture: 13.00 x 10.75 x 11.65" (33.0 x 27.3 x 29.6 cm)
Fixture with Yoke: 18.00 x 13.65 x 11.65" (45.7 x 34.7 x 29.6 cm)
Weight14.2 lb (6.4 kg) with C-Clamp and Yoke

Easily integrates into preexisting dimming systems (both forward and reverse-phase)

Functions in constant power, DMX, and combination constant power/DMX systems

RDM compliant

DMX and powerCON daisy chaining

Variable beam angle: 10 to 50 degrees

50,000 hour life expectancy

High-resolution digital dimming

Fully homogenized beam

Works with standard theatrical gels and gels formulated for LEDs

High CRI (greater than 90)

Ships with a C-clamp, color frame, safety cable, and powerCON power cable

Made in the USA

Related Questions and Answers

Q: 1. What power source is used for the active cooling fan?

A: The cooling fan in the SmallRig RA-F150 Focusing Fresnel has no outside power source, instead it uses thermal heat, which is enough to spin the fan. This fan activates once the sensors reach 25°c.

Q: 2. Does the 420 watt ltm pepper fresnel take smaller wattage bulbs?

A: You can use a smaller wattage in the LTM Pepper 420 such as the Ushio JCD 300W Lamp (300W/120V) GY9.5 B&H # USJCD120300Q. An image is shown below for reference.

Q: 3. Does this item require a speed ring if so is it included, if not, what type does it require?

A: This softbox already includes a speed ring.

Q: 4. Will this work with the COLBOR 220W Bi-Color COB?

A: Yes, the GVM F40 Fresnel Attachment for LED Light Spotlight will mount and work with the COLBOR CL220R 220W RGB COB LED Video Light. Both of these products utilize the Bowens S mount.

Q: 5. Will the body of the fresnel clear the GVM 650 Bowens mount and attach securely? Aputure F10 fresnel hits the body.

A: At the moment the SmallRig RA-F150 Focusing Fresnel Lens for LED Monolights in not in stock for us to give 100% answer, however by the design of it with what I'm able to see on the images, it does not have the second glass piece like the Aputure Fresnel 2X Attachment and should be able to fit, but I would suggest to check in later with video chat team once we receive this item for the best assistance. Thank you.

Q: 6. Why are these 5000K? For true daylight these should be in the 5500/5600 kelvin range. Am I missing something?

A: These are geared for the Cinema industry and 5000K is the preferred color temperature

Q: 7. I'm trying to find a part for my Pepper 420. Any idea where I can go? Do you all offer them?

A: B&H does not sell replacement parts for this light. The manufacturer's phone number is 800-762-4291 or 818-780-9828

Q: 8. Is this compatible with the capture 600d?

A: No, the SmallRig RA-F150 Focusing Fresnel Lens for LED Monolights can physically mount to the Aputure LS 600d but the 600d requires a stronger fan.

Q: 9. could this fit in a tweenie 2 mole richardson fixture?

A: The Visionsmith ReLamp 300 LED for ARRI 300 Plus Fresnel (Daylight) BH #VIVSFKWD is specifically for the Arri 300 Plus housing.

Q: 10. Is it compatible with GVM Video Lighting PRO-SD300B/400B/500B/650B? Bowens mount, but I'd like to be sure.

A: The SmallRig RA-F150 Focusing Fresnel Lens for LED Monolights BH #SM4246 is compatible with bowens mount lights up to 600w.

29/08/2024

[>90] I bought this Sola 4+ fresnel for use as a back light in a typical 3 point lighting scenario. It fits the bill quite well I think. I considered the ARRI L5 for this because it is bi-color, but my budget didn't quite allow for it, so the Sola 4+ was the next best option. The Sola 4+ is light enough to place on a boom without excessive counterweights and allows for easy rigging. The fixture is mostly plastic which gives it a bit of a cheap feel however. The barn doors have plastic hinges but the doors are aluminum. Considering the plastic makes it light weight, which is a huge bonus if you are travelling with this fixture, I think it is a reasonable trade off. The focus range allows fine tuning and quite a narrow spot. Fan is quite enough that most audio situations would not pick it up. The fixture has a small form factor but it packs a pretty good punch for its size. Because it is only daylight balanced, I purchased the 5 piece CTO pack which includes a opal frost diffusion. Not sure I will use the DMX function but it's nice to know it's there incase I do. Overall, I think this light is a pretty good value but it needs to be handled and packed carefully to avoid possible damage. I gave the Sola 4+ five stars because it met my expectations based on the advertising and published specs. Now Litepanels needs to make a bi-color version of this fresnel to truly perfect it!

5
21/08/2024

[4000 K] I've used several of these, and they always produce the results I need. For this kinda price, it is a great light fixture. I know I'll buy more.

5
06/07/2024

[Yes] This Altman light is really good quality, but everyone knows Altman makes good stuff, anyway. With a 500 watt bulb and a set of barn doors I am able to light a stage for video and spot the presenter with really good separation of the spot from the on-stage video projector screen. It is a Fresnel so the spot isn't clearly defined on the edges like an ellipsoidal, but if you need to isolate a spot this will do it. The barn doors on front make it that much easier. In wide flood mode it produces a nice, even spread - kind of like a Par 64 can.

5
25/06/2024

[425.5] I am an established photographer and I was looking for some new lighting. I found this and decided to get it because it was portable and lightweight. I do a lot of outside shooting and this is the perfect light for that. It does not get hot either, which is very lovely. A great investment!

5
16/06/2024

[425.5] These stands are such workhorses, you can't buy 'em used because every rental house continues to send them out constantly. It was great to get these all shiny and pretty and new, which I've never had the opportunity to see in all my years LOL! Great for theater lighting in small venues or tucked-in-the-corner additional positions. I love 'em :)

5
08/06/2024

[425.5] We were purchasing these to swap out for some spots that weren't working. Easy to install - reliable units.

5
07/06/2024

[White] The 65Q is a high quality, well-built Fresnel which is what we've all come to expect from Altman. Its got a nice spot ranging from wide flood to narrow spot with the spotlight adjustment on bottom. Spots are not defined like a focused ellipsoidal, more like a Par 64. With a 500 watt bulb and set of barn doors I was able to spot a presenter on a stage for video and completely isolate the on-stage projection screen from any spillover light.

5
03/06/2024

[4000 K] I love this light! I was looking for a LED panel that was easily transportable because I never know where I'll end up working. I enjoy the LED aspect because there are same advantages of the traditional fresnel lighting along with the energy-saving and efficient aspects. This light is lightweight and the panel doesn't get hot which is a major plus as well. You can easily control the DMX with the external DMX panel. What I really love though is that the color temperature is so reliable. There are no weird color tints when in use. I've used this for anywhere between 30 minutes to a couple of hours with very accurate color temperature throughout the whole shoot. Overall this is my favorite light to work with due to it's reliability and quality. Highly recommended!

5
12/05/2024

[4000 K] As a professional videographer I need the perfect lighting for my work which includes indie films and documentaries. I was looking for something portable and lightweight that didn't get hot yet gave a lot of light output. What I love is this light is an LED fresnel. It takes the same advantages of a traditional fresnel light (beam intensity, longer distance) yet has the energy-saving and efficiency pros of an LED light. I'm a fan of the color accuracy-- the purity of the light is great and has no weird color tints. The color temperature remains consistent, no matter how long I use it (30 min-2 hrs), the temp is always accurate and does not dip. How great is that? Another great feature is that this also has built-in DMX controls, so you can control it with an external DMX panel. If you're looking for well priced lighting that's light weight, has great color accuracy and is priced well-this is a great choice!

5
02/05/2024

[4000 K] This fixture is built very well. Not quite like tank, but fairly close to it. A note of caution: this unit is very hot. A 750 watt bulb will be hot, I assumed. But I didn't realize the cowling/fixture would get as hot as it gets. Duh. But wow, it is bright. I have to be very careful where I set up this fixture.
However, this is my first foray away from inexpensive LED lights. A very important lesson learned, but well worth the money.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Altman Pegasus 6 4000k Led Fresnel Light

$4,801.59 $7,010.32

Altman Pegasus 8 5000k Led Fresnel Light

$5,177.25 $7,403.47

Altman Pegasus 6 5000k Led Fresnel Light

$4,801.59 $6,146.04

Altman Pegasus 8 3000k Led Fresnel 8" White

$5,177.25 $7,196.38

Altman 65q-ce Fresnel Light 750w 240v

$1,353.00 $2,164.80

Altman Halo 6" Nimbus Led Video Light

$131.76 $177.88

Litepanels Sola 4+ Led Fresnel Light

$4,034.25 $5,365.55

Products You May Like

Idx Duo-c198p 193wh Li-ion V-mount Battery

$1,197.00 $1,663.83

K&f Concept Nano-x Cpl Filter 95mm

$257.97 $356.00

Swarovski 1-8x24 Sr Z8i Riflescope Ld-i Reticle

$11,067.00 $15,825.81

Freefly Cargo Landing Gear For Alta Drones

$3,300.00 $4,719.00

Alzo Dslr Rig Full Gear Kit Transformer

$293.88 $426.13