Camplex Apc Sc To Upc Lc Singlemode Duplex Fiber Patch Cable

Product Code: eq179144
Availability: In Stock

$59.85 $83.19

Qty

16 reviews Write a review

Description
Reviews (16)

From Camplex, the APC SC to UPC LC Premium Bend Tolerant Singlemode Duplex Fiber Patch Cable, 3.3' long and with a yellow OFNR jacket, is designed to bridge the gap between APC polish equipment and legacy UPC infrastructures. The cable uses bend-insensitive OS2 fiber and lets you connect patch panels or network devices requiring 9/125 singlemode cabling. Other key features include ceramic ferrules for long-lasting reliability and precision alignment.

9/125 Cable with OFNR Jacket Connect APC Gear and UPC Infrastructures Connect Patch Panels or Network Devices Ceramic Ferrules

Key Specs
Connector 1	SC (APC)
Connector 2	LC (UPC)
Cable Length	3.3' / 1 m
Fiber Type	Single Mode (Yellow)
Parameters
Connector 2	LC (UPC)
Cable Length	3.3' / 1 m
Fiber Type	Single Mode (Yellow)
Core Size	9 µm
Return Loss	< 45 to 65 dB
Attenuation	< 0.3 dB/km @ 1310 nm
Operating Conditions	-4 to 176°F / -20 to 80°C
Safety Certification	OFNR
Packaging Info
Package Weight	0.05 lb
Box Dimensions (LxWxH)	6.75 x 6.05 x 0.6"

Related Questions and Answers

Q: 1. Can I use Protools with this?

A: Pro Tools 11 is included in this bundle. All hardware in the bundle is compatible with Pro Tools version 9 and above.

Q: 2. Will this work with the original Blackmagic Pocket Cinema Camera 1080HD?

A: Yes 100%. The following unit has a payload support of 5.5 lbs. be mindful that the original design for this unit is for mirrorless units.

Q: 3. Will a Nikon d7500 and a 50mm f1.8 be able to fit on this gimbal? Or will the back of the camera bump into the gimbal?

A: The gimbal is compatible with the Nikon D7500 for stabilization use. The camera size should not be a problem for the gimbal and it's mobility.

Q: 4. I see loops on each end for a strap, but does it come with a strap?

A: Yes, this bag comes with a strap.

Q: 5. will it work with a mac?

A: Yes - with a compatible audio interface. Focusrite Scarlett 2i2 - Portable USB Audio Interface B&H # FOS2I2

Q: 6. Curious if the Canon XC10 or XC15 (w/o audio module) will work with this gimbal and still be fully functional?... i.e. under-slung mode without camera hitting the rear motor, etc.

A: The Ronin-SC is designed for smaller mirrorless options only. It will not be able to balance the Canon XC10 or XC15.

Q: 7. is this made by sony?

A: These are not SONY products. The microphones are made by Senal and RODE.

Q: 8. Can it be used with Sony ZV-E10?

A: While the Sony ZV-E10 is not among the cameras listed on DJI's compatibility list for the DJI Ronin-SC Gimbal Stabilizer, there should be no issues with using the camera with this gimbal, provided you are not trying to use advanced controls. The compaibility list is for those cameras that have compatible cables and other accessories.

Q: 9. Is this mic compatible with this https://a href= http://www.bhphotovideo.com/c/product/1023480-REG/auray_bai_2x_2_sect_brdcst_arm.html target= _blank www.bhphotovideo.com/c/product/1023480-REG/auray_bai_2x_2_sect_brdcst_arm.html/a ?

A: Yeah! The kits themselves come with all of the materials you need to rig it up, too.

Q: 10. Can the Ronin SC be used with prosumer-size camcorders, like the Panasonic WXF 991K or the Canon HF G 50?

A: Yes, since both camcorders are less than Ronin SC's maximum payload (4.4lb), the gimbal will work with both camcorders.

Jerone	22/09/2024
[SC (APC) ] Excellent 5

Misael	27/08/2024
[LC (UPC)] Excellent. 5

John	12/08/2024
[< 45 to 65 dB] While I wasn't a fan of the cost at first, this is certainly a product where we are getting what we paid for. Cars and trucks of all sizes run over these cables all the time while we are trying to set things up, and after a year, the cables still look new- no signs of damage or even wear. They have sat outside for over a month at a time, in the rain and snow (minus the ends), and they just work great. 5

Jonathan	28/07/2024
[OFNR] Connected one switch to another (200 feet) and it works. 5

Samuel	27/07/2024
[OFNR] Well made product! 5

James	25/07/2024
[LC (UPC)] These work perfectly with my BlackMagic studio cameras. 5

Abylay	18/07/2024
[OFNR] Wish the fiber cable was little thicker. 5

Jeffrey	02/07/2024
[LC (UPC)] A good affordable 1 meter long multi mode fiber cable. 5

jeremy i.	27/06/2024
[LC (UPC)] This unit is great and functions as both simplex and duplex feed thru panel. We are using this in our studio as part of our patch panel and video hub. 5