Camplex Apc Sc To Upc Lc Singlemode Duplex Fiber Cable

Product Code: eq179145
Availability: In Stock

$67.47 $80.96

Qty

18 reviews Write a review

Description
Reviews (18)

From Camplex, the APC SC to UPC LC Premium Bend Tolerant Singlemode Duplex Fiber Patch Cable, 9.8' long and with a yellow OFNR jacket, is designed to bridge the gap between APC polish equipment and legacy UPC infrastructures. The cable uses bend-insensitive OS2 fiber and lets you connect patch panels or network devices requiring 9/125 singlemode cabling. Other key features include ceramic ferrules for long-lasting reliability and precision alignment.

9/125 Cable with OFNR Jacket Connect APC Gear and UPC Infrastructures Connect Patch Panels or Network Devices Ceramic Ferrules

Key Specs
Connector 1	SC (APC)
Connector 2	LC (UPC)
Cable Length	9.8' / 3 m
Fiber Type	Single Mode (Yellow)
Parameters
Connector 2	LC (UPC)
Cable Length	9.8' / 3 m
Fiber Type	Single Mode (Yellow)
Core Size	9 µm
Return Loss	< 45 to 65 dB
Attenuation	< 0.3 dB/km @ 1310 nm
Operating Conditions	-4 to 176°F / -20 to 80°C
Safety Certification	OFNR
Packaging Info
Package Weight	0.085 lb
Box Dimensions (LxWxH)	7.05 x 6.65 x 1.3"

Related Questions and Answers

Q: 1. is this made by sony?

A: These are not SONY products. The microphones are made by Senal and RODE.

Q: 2. I see loops on each end for a strap, but does it come with a strap?

A: Yes, this bag comes with a strap.

Q: 3. will it work with a mac?

A: Yes - with a compatible audio interface. Focusrite Scarlett 2i2 - Portable USB Audio Interface B&H # FOS2I2

Q: 4. Will this work with Panasonic g7?

A: Yes it will.

Q: 5. By using a cage or counter weight can ronin SC be used for under slung mode, flash light angle with a Sony A7iii and 24-105mm lens??

A: According to DJI for the A7III with the Sony 24-105mm F/4 lens the use of counterweights are needed to offset positioning enabling the use of flashlight mode.

Q: 6. Can the Ronin SC be used with prosumer-size camcorders, like the Panasonic WXF 991K or the Canon HF G 50?

A: Yes, since both camcorders are less than Ronin SC's maximum payload (4.4lb), the gimbal will work with both camcorders.

Q: 7. Can it be used with Sony ZV-E10?

A: While the Sony ZV-E10 is not among the cameras listed on DJI's compatibility list for the DJI Ronin-SC Gimbal Stabilizer, there should be no issues with using the camera with this gimbal, provided you are not trying to use advanced controls. The compaibility list is for those cameras that have compatible cables and other accessories.

Q: 8. Is there any padding or is it only fabric?

A: There is over 1/2 of padding all the way around.

Q: 9. can ronin sc be used with a Sony A7iii and 24-105mm lens or sony 24mm lens ?

A: The DJI Ronin-SC Gimbal Stabilizer can support the Sony A7 III mirrorless camera and the Sony FE 24mm f/1.4; however, DJI does not recommend using the Sony FE 24-105mm f/4. https://bit.ly/3tz7IVB

Q: 10. Just received this kit and found that I am unable to mount the shock mount to the mic stand. We have a standard sized mic stand but the shock mount attachment is too small. Is there a special (or different) attachment available so I can mount the shock mount and mic to the mic stand?

A: The included shockmount features a female 3/8 to 5/8 male microphone adapter (similar to B&H# AUADCOMBOB) that allows integration with European standardized mic stands. To remove, simply locate the indentations or grooves on the outer edge of the adapter, and use a flat head screw-driver or small coin to turn an loosen; at which point the shockmount will have the correct size for your mic stand.

Malenky	29/09/2024
[9 µm] I have a reel with just one channel on it, but found out it's cheaper to buy this cable and just remove the bracket from the LC side. Comes right out without cutting anything. 5

John	27/09/2024
[OFNR] For Tactical fiber cables, these are ultra light weight, but they do take a beating! Great Cables! 5

Christopher	25/09/2024
[< 45 to 65 dB] not much to say here. these work great with no issues. 5

Jerone	13/09/2024
[< 45 to 65 dB] Excellent 5

Tim	12/09/2024
[0.085 lb] We use this to get audio/video to the front and back of large conference rooms, works great. The cable is only as thick as a single regular XLR cable. 5

James	08/09/2024
[0.085 lb] Perfect solution instead of re-ending long fiber runs. Product is well made and works great. Make sure you match the fiber mode. 5

John	25/08/2024
[0.085 lb] While I wasn't a fan of the cost at first, this is certainly a product where we are getting what we paid for. Cars and trucks of all sizes run over these cables all the time while we are trying to set things up, and after a year, the cables still look new- no signs of damage or even wear. They have sat outside for over a month at a time, in the rain and snow (minus the ends), and they just work great. 5