This Manfrotto MH804 3-Way Pan-Tilt Head with 200LT-PL Platesfrom Manfrotto MH804 3-Way Pan-Tilt Head with 200LT-PL Plateshas a load capacity of 22 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. It includes an integrated RC2 quick release cam lock and a 200LT-PL Quick Release Plate. RC2 compatible quick release plates such as the 200LT-PL can be removed from the head by pulling the cam lock's spring-loaded lever, which also allows the plate to be quickly reattached. The cam lock also features a safety catch to prevent the 200LT-PL, or another compatible quick release plate from accidentally disconnecting.

Cameras, sport optics, or camcorders that are compatible with a 1/4"-20 mount can be connected to the quick release plate before securing it to the pan-and-tilt head. The head can be rotated 360°, tilted 90° forwards or 30° backwards, as well as 90° sideways for portrait orientation. Each of these three movements function independently of each other, have dedicated control handles, and can be locked into place. In addition to integrating the ability to individually lock the movements by twisting each corresponding handle's rubberized grip, the telescoping control handles for both tilt functions can also be retracted while the head is not in use for more convenient storage or transport.

To promote fast, repeatable, and accurate device positioning, this MH804 3-Way, Pan-and-Tilt Head also includes dedicated angle scales for each movement that are designed for easy visibility. For heavier loads, built-in counterbalance springs help ensure smooth as well as gradual backwards and forwards tilt movements.

Load Capacity: 8.8 lb    3 Independent Movements with Locks    90° Forwards and 30° Backwards Tilt    Up to 90° Portrait Angle Tilt    360° Rotation, Built-In Bubble Level    Retractable Handles for Tilt Movements    RC2 Quick Release Cam Lock    Durable and Lightweight Construction    Two, 200LT-PL Quick Release Plates    1/4"-20 Mount, Non-Slip Surface

• 22 lb load capacity
• Compatible with tripods or support systems that feature a 3/8"-16 mount
• Can be rotated 360°, tilted 90° forwards or 30° backwards, as well as 90° sideways for portrait orientation
• Rotation, backwards and forwards tilt, as well as portrait orientation tilt each function independently of each other, have dedicated control handles, and can be locked into place
• Telescoping control handles for both tilt functions can be retracted for more convenient storage or transport
• Dedicated angle scales for each movement that are designed for easy visibility promote fast, repeatable, and accurate device positioning
• Built-in counterbalance springs help ensure smooth as well as gradual backwards and forwards tilt movements for heavier loads
• Integrated, RC2 quick release cam lock
• Built-in bubble level
• Durable and lightweight polymer and fiberglass construction

• Compatible with Manfrotto RC2 quick release cam lock
• Measures 1.7 x 2.1 x 0.4" and has a rubberized, non-slip surface
• 1/4"-20 mount
• Durable and lightweight polymer and fiberglass construction

Related Questions and Answers

Q: 1. Is there an option for a longer pan handle?

A: I'm sorry, no.

Q: 2. Would this fit the Manfrotto MT190X3 Aluminum Tripod?

A: Hi JackI've been using this head on my 055 series tripod, without any problems.I should fit the 190 aluminium tripod without any problems. The only thing to check would be whether the tripod mounting screw for the camera is the bigger 'pro' size or the standard 1/4 . No problem though, as you can normally unscrew the bigger screw adaptor to reveal the smaller screw fitting underneath (if required).Hope this helpsCheersBrian

Q: 3. How accurate is the movement? Can it tilt/pan 0.1deg or 0.5deg?

A: The motions on the Manfrotto 400 geared head are not as refined and it might be a tad bit harder to nail down very slight adjustments. Your results may vary!

Q: 4. Does this set up allow for vertical shooting?

A: Yes

Q: 5. Can this head be operated in real time, like a motion picture geared head?

A: Due to the mechanism/strength required to crank the Manfrotto 400 geared head, it might not be viable as a cinematic/video head. It rotates very slow, but also might vibrate from the motion of turning the gears depending on the strength exerted. Your results may vary.

Q: 6. Will this Head work with the Vanguard VEO 265CB tripod?

A: Yes the Manfrotto XPRO 3-Way, Pan-and-Tilt Head with 200PL-14 Quick Release Plate is compatible with the Vanguard Veo 265CB tripod.

Q: 7. I like to"bag" things. Does anyone have a suggestion for a lens bag that might fit this head (5.3x5.3x5.3) interior dimensions for the "bag"? Thanks, Bruce

A: Either of these bags will fit your head! And are pretty small. Manfrotto Advanced II Shoulder Bag: https://www.bhphotovideo.com/c/product/1505221-REG/manfrotto_mb_ma2_sb_xs_advanced_ii_shoulder_bag.html Ruggard Hunter 25 DSLR Holster Bag: https://www.bhphotovideo.com/c/product/1505221-REG/manfrotto_mb_ma2_sb_xs_advanced_ii_shoulder_bag.html

Q: 8. is it compatible with vanguard alta tripod?

A: Yes. Both use the 3/8"-16 mounting screw size.

Q: 9. Is this head compatible with Manfrotto 745XB video tripod legs?

A: Yes

Q: 10. Will this work on a Matthews m25 tripod ?

A: The Matthews M25 tripod uses a 65mm bowl, so this Manfrotto head will not fit.